Efficiency

Using the results we gathered so far, we plotted a chart showing the PSU's efficiency at low loads and loads ranging from 10 to 110 percent of the maximum-rated capacity.




This is an efficient platform, especially with normal and super-light loads.

10%–110% Load Testing

These tests reveal the PSU's load regulation and efficiency levels under high ambient temperatures and show how the fan-speed profile behaves under harsh operating conditions.


The PSU was able to deliver its full power and even more at temperatures exceeding 45°C. If you plan to push this PSU that hard, you had better wear earplugs since the fan's noise exceeds 45 dBA.

Light Load Testing

In the following tests, we measure the PSU's efficiency at loads significantly lower than 10 percent of the maximum capacity—the lowest load the 80 PLUS standard measures. This is important for when a PC is idle with its power-saving features turned on.


Efficiency levels are high enough at light loads, but the same also goes for the fan's noise.

Ultra-Light Load Testing

The applied load in this test is only 10 W for PSUs with 500 W and less capacity. This is because we dial in 2% of the maximum-rated capacity for all other PSUs and only run this test with 115 V input.


The PSU is very close to the 70% mark with 2% load.

5VSB Efficiency

The 5VSB rail is highly efficient.

Power Consumption in Idle and Standby

Power consumption is quite high in standby and 230 V input.