Many would be familiar with these pictures of a generic graphics card based on NVIDIA's GF100 GPU which was spotted at this year's CES. A company slide sourced by DonanimHaber reveals the final iteration of NVIDIA's reference design GeForce GTX 480 graphics accelerator, and what it looks like from the outside. A set of slightly more recent pictures showed its cooling assembly from inside. The protruding heat pipes intrigued us as they were inconsistent with the cooling assembly on the card NVIDIA showed off at CES, which we then believed to be the top-end GTX 480 part. The company slide confirms what the cooling assembly looks like when it's all put together.

The cooler is highly ventilated, with vents all over the cooler's shroud. There are vents on the top, on the sides, apart from the usual obverse fan air intake. To increase its intake, the PCB is further cut to help draw air from the reverse-side of the PCB. The cooler's four large (we reckon 8 mm thick) heat pipes protrude about a centimeter out of the card's periphery, increasing its height by that much. The cooler itself respects the 2-slot thickness limit which is most conventional. A table in the slide also confirms some details we already know: the card has 1536 MB of GDDR5 memory across a 384-bit wide interface. It has a TDP of under 300W, which a recent report reveals to be a hairbreadth under 300W, at 296W. Power is drawn in from an 8-pin and a 6-pin PCI-E power connector. The card is 10.5 inches long, the same length as its reference-design GeForce GTX 280. The card supports 3-way SLI. It will be unveiled on the 26th of March.