Today, Alphacool introduces the ES 4U reservoir with integrated D5 pump top from the Enterprise Solutions series. The combination of pump top and reservoir is designed to be mounted directly into the front of 4U servers. This gives you easier maintenance possibilities thanks to clever positioning in the server case!

Another plus point is the cover used, it is made exclusively of acrylic, allowing you to see and control the water cooling level at any time. In addition, the acrylic cover has 2 inlets and outlets with G1/4" threads, which allow easy filling, draining and bleeding of the cooling loop even when installed in the case. The integrated pump top and is compatible with all D5 format pumps. The pump retaining ring, pump O-ring and all screws are included.

Alphacool today presents the D-Plug, a new connector from the ENTERPRISE SOLUTIONS series. The ES D-Plug has 2 G1/4" external threads and offers the possibility to connect components such as graphics cards, CPU coolers or radiators to each other within the cooling loop. The special feature of the D-Plug is that they are push-fit rather than screwed together. Each D-Plug has a variable length which can be achieved by pulling the connector apart, an extension of up to 15 mm is possible. The additional length available allows a high degree of flexibility in compensating for inaccuracies in the system design. The lack of a screw connection prevents the possible twisting of hoses during installation.

Of course, the connector has been extensively tested in the Alphacool lab with the result that the D-Plug is stable up to 1.5 Bar. The ES D-Plug is available in lengths of 20 mm, 25.5 mm and 31.5 mm - optionally in brilliant chrome or matte black.

Alphacool today presents the Eiswolf 2 All-in-One solution for GeForce RTX 3080 NVIDIA Founders Edition and Radeon RX 6800/6800XT MSI Gaming X Trio graphics cards. The Eiswolf 2 uses the Alphacool 360 mm NexXxoS ST30 full copper radiator. For the fans, we use the 120 mm Alphacool Aurora Rise. The AIO is completed by the Eisblock Aurora water cooler. This not only cools the GPU chip, but actively cools all relevant components such as the memory and VRAM. It also has brilliant aRGB lighting.

All components used (radiator, fan, cooler, DC-LT 2 pump) including fittings and tubing are part of the Alphacool DIY range and are therefore available separately. The combination of all components results in a solution that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.

With the Eisbaer LT240 & LT360 Aurora, Alphacool today presents new CPU "All-in-One" solutions based on the previously so successful Eisbaer LT series. Compared to the classic Alphacool Eisbaer LT AIO, the cooler and pump unit as well as the fans of the new Aurora version are now fully equipped with digital RGB LEDs. With the included controller, extensive lighting effects can be set, which provide unique and noble illumination.

As with all Eisbaer AIOs, Alphacool again uses the NexXxoS radiator with cooling fins, pre-chambers and cooling channels made of copper as well as the robust TPV hoses with quick-release couplings from the ENTERPRISE Solutions series. With the help of the quick couplings, it is possible to integrate other common water cooling products such as GPU coolers into the loop. The flat pump housing allows the AIO to be installed even in the smallest spaces. Alphacool's Eiszyklon Aurora LUX PRO is used as the fan, the DC-LT pump is replaced by Alphacool's quieter and more powerful DC-LT2 pump.

We're ready for the launch of Intel's 12th Gen Core processor, Alder Lake! We can announce that almost the entire current Alphacool range of CPU coolers and CPU AIOs are compatible with the LGA socket 1700. A mounting kit included in the scope of delivery enables immediate use on Intel's LGA 1700 socket. The compatible CPU blocks include: Eisblock XPX, Eisblock XPX Pro Aurora, Eisblock XPX Aurora, Eisbaer (Solo), Eisbaer LT (Solo), Eisblock XPX 1U, Eisblock XPX Pro 1U, Eisblock Aurora XP³, and NexXxoS XP³. The compatible AIO coolers include: Eisbaer, Eisbaer Aurora, Eisbaer Extreme, Eisbaer LT, and Eisbaer Pro Aurora. The complete list can be found below.

Alphacool today presents the HPE-45 and HPE-60 X-Flow, the new generation of high-performance radiators from Alphacool's proven NexXxoS full copper radiator series. What is new? With the HPE series, Alphacool increases the number of cooling channels within the radiator. This change gives a significant increase in cooling performance without increasing the restriction in the radiator. Another performance-enhancing feature of Alphacool's HPE series is the high fin density. With a fin spacing of 15 or 16 FPI, it enables an optimal flow of air. If the radiator is equipped with 80 mm fans on both sides in push/pull mode, a significant reduction in water temperature is demonstrably possible compared to standard radiators.

The NexXxoS HPE-60 all-copper radiators also feature Alphacool's proven X-Flow technology. This means that the Inlets and outlets are located on the opposite sides and thus enable an easy realisation of a water circuit within a server rack. The 60 mm thick radiators can be equipped with three or four 80 mm fans per radiator side.

Alphacool today presents the Eiswolf 2 "All-in-One" solution for Geforce RTX 3080/3090 Gigabyte Aorus Master/Xtreme and Radeon RX 6800XT/6900XT Sapphire Nitro+graphics cards. The Eiswolf 2 uses the Alphacool 360 mm NexXxoS ST30 full copper radiator. For the fans, we use the 120 mm Alphacool Aurora Rise. This impressive fan with a max. static pressure of 3.17 mm/H2O, offers a max. air flow of 119.8m³/h. The speed range of the fan, from 0-2500rpm, is adjustable via PWM. The AIO is completed by the Eisblock Aurora water cooler. This not only cools the GPU chip, but actively cools all relevant components such as the memory and VRAM. It also has brilliant aRGB lighting.

All components used (radiator, fan, cooler, DC-LT 2 pump) including fittings and tubing are part of the Alphacool DIY range and are therefore available separately. The combination of all components results in a solution that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop. Only the pump housing for the DC-LT 2 pump is a custom-made item that is only part of the scope of delivery of the AIO solution and is therefore not available separately.

The Alphacool Eisblock Aurora acrylic GPX water cooler with backplate is now also available for MSI Radeon RX 6700 XT Gaming X graphics cards.

More performance! Voltage converters and V-RAM is now cooled much better and more effectively with liquid cooling. This is due to the components being brought closer to the cooler through the use of thinner, yet more powerful Thermal pads. The reduction of the thickness of the nickel-plated copper block to 5.5mm and the constant optimisation of the water flow within the heat sink promise a significant increase in performance. In addition to performance, design also plays an important role. The addressable digital RGB LEDs are embedded directly in the cooling block and give the cooler its very own visual touch.

Alphacool today presents the Eiswolf 2 "All-in-One" solution for NVIDIA GeForce RTX 3080/3090 Gigabyte Gaming/Eagle graphics cards. The Eiswolf 2 uses the Alphacool 360 mm NexXxoS ST30 full copper radiator. For the fans, we use the 120 mm Alphacool Aurora Rise. This impressive fan with a max. static pressure of 3.17 mm/H2O, offers a max. air flow of 119.8m3/h. The speed range of the fan, from 0-2500rpm, is adjustable via PWM. The AIO is completed by the Eisblock Aurora water cooler. This not only cools the GPU chip, but actively cools all relevant components such as the memory and VRAM. It also has brilliant aRGB lighting.

All components used (radiator, fan, cooler, DC-LT 2 pump) including fittings and tubing are part of the Alphacool DIY range and are therefore available separately. The combination of all components results in a solution that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop. Only the pump housing for the DC-LT 2 pump is a custom-made item that is only part of the scope of delivery of the AIO solution and is therefore not available separately.

Server and workstation users will soon be able to mount all Eisblock XPX Pro models and the Eisbaer Pro AIO on the LGA 4189 socket. The corresponding bracket will soon be available as an option. Owners of an XPX Pro cooler or the Eisbaer PRO AIO can contact Alphacool with their invoice to receive a free bracket: info@alphacool.com

All Eisblock XPX coolers and Eisbaer AIOs are already compatible with Intel Socket LGA 1700. If you own an Alphacool Eisblock XPX cooler and looking to upgrade to the new Intel Socket 1700, you don't have to worry about additional mounts. All Eisblock XPX coolers are already compatible with the new socket LGA 1700 with the included mounting material. A corresponding new manual for all coolers of the Alphacool Eisblock XPX series will be available online when the socket is released. All Eisbaer CPU AIO water coolers are also compatible with Socket 1700 with the enclosed mounting kit.

With the ES "HighFlow" flow and temperature sensor, the Rise 6 W/mk thermal compound and the AlphaTube HF 19/13 Ultra Clear hose, Alphacool today presents three new products in the Alphacool range that no water cooling loop should be without. One sensor, two functions! The Alphacool ES "HighFlow" is a combination of flow and temperature sensor, which can be integrated at any position in the water circuit due to its very compact design. Due to the use of acetal, the sensor is extremely light at only 45 g.

Alphacool's Rise 6 W/mK thermal paste is clearly one of the favourites when performance and easy application is required. The thermal paste is electrically non-conductive and very well suited for high contact pressures. Thanks to its consistency, even the smallest height differences between the components to be cooled are compensated for and the heat generated can be dissipated better.

Alphacool today presents the NexXxoS Nova 1080 mm fan box and the Nova 1080 9x120mm fan shroud, two further accessories to fine tune the functionality of the Alphacool NexXxoS XT45 & UT60 Full copper 1080 mm Nova radiators.

The Alphacool NexXxoS Nova 1080 mm fan box enables external installation of a NexXxoS XT45 Nova 1080 mm radiator including fan. Thanks to the included feet, the fan box can be placed anywhere. The grid structure at the front and rear of the box provides optimum air flow and also protects the fan and the cooling fins of the radiator from damage due to penetration by foreign bodies.

Today, Alphacool presents a new generation of thermal pads. The Alphacool Apex Soft and Rise Ultra Soft thermal pads can be compared thermal paste due to their outstanding properties and efficiency.

The Apex Soft and Rise Ultra Soft thermal pads fill up the unevenness of components significantly better than standard pads. As they can nestle between components better, heat transfer between the cooler and component is significantly increased. The softer consistency of the thermal pads also prevents taller components such as voltage converters or VRAM from being subjected to increased contact pressure from the cooler. The special material does not dry out as easily as standard thermal pads, allowing them to be used for a much longer period without any significant loss of performance.

With the NexXxoS XT45/UT60 Dual-Flow and the NexXxoS ST25 radiators, Alphacool is once again expanding its range of high-performance all-copper radiators. The NexXxoS XT45/UT60 360 mm Dual-Flow radiators have been specially developed for use in servers. A new feature is that the dual-flow radiator based on Alphacool's X-Flow technology is split in the middle and this consists of two smaller X-Flow radiators. Due to the limited space in servers, the use of multiple radiators is often not possible. With dual-flow radiators from Alphacool, tubing can be routed easily and, depending on the scenario, it is even possible to create two separate water loops.

The Alphacool Eisblock Aurora Acryl GPX for the reference design with backplate for AMD Radeon RX 6700 XT graphics cards is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Style meets performance!

The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. The design is new and special attention was paid to the lighting. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. The aRGB LEDs used here give the cooler its very own visual touch.

Alphacool introduces the Tec Protect 2 Clear coolant, another high-end solution in the Alphacool Coolant range. With the successor of the already proven Tec Protect coolant, you get a ready-to-use mixture that can be used as is and contains all the necessary additives for your liquid cooling loop.

Alphacool's Tec Protect 2 Clear coolant consists mainly of osmosis water, which is free of all contaminants due to multiple filtration. This makes contamination of the water loop from such minerals as lime, bacteria, fungi and algae almost impossible. Coolers, radiators, pumps and hoses remain free of deposits and can perform their work reliably thanks to Alphacool's Tec Protect 2 Clear coolant.

Alphacool presents the Rise Aurora 120 mm, a powerful and PWM controllable fan that also features brilliant Digital RGB LED lighting. The Alphacool Rise Aurora fan allows for an impressive airflow of 118.9 m³/h and has high static pressure of 3.17 mm/H₂O. Due to this, the fan is ideally suited for operation on radiators or as a particularly strong case fan. Thanks to the 4-pin PWM connector, the fan can be controlled over the speed range from 0 to 2600 rpm. At 0% PWM control, the fan can be stopped completely. A soft start at start-up increases the life of the fan and reduces the risk of injury. At low speed, the fan is almost silent and provides significant energy savings.

Alphacool presents the Eiszapfen connection terminals and the Square temperature sensor with a new cube design. The striking, angular design clearly stands out from the appearance of the mostly round sensors. Elaborate logo placements have been deliberately omitted, as the form and function of these products should be in the foreground. Due to the compact design, the Eiszapfen Connection terminal and the Square temperature sensor can be easily integrated into any water loop. With the connection terminal, parallel circuits can easily be created, temperature sensors can be integrated or it can be used as a stylish angle piece. The application possibilities are versatile. To achieve the lowest possible total weight, the connection terminal and temperature sensor are made of acetal.

Alphacool's proven Eiszapfen connection series is now available in the WHITE SERIES edition. In addition to brilliant chrome and deep matte black, Alphacool's extensions, angle adapters, double nipples, L-connectors and hardtube fittings of the Eiszapfen series are now also available in discreetly noble white. Thanks to special processes, the coating is firmly bonded to the substrate. This ensures a high durability of the color and prevents the coating from flaking off. The majority of the connectors also feature the Alphacool logo, which makes them simply unmistakable in addition to their shape and color! With its high-flow, form, processing and color, the white Eiszapfen fulfills all your requirements.

Alphacool today introduces three different server racks in 1U, 2U and 4U formats. Alphacool is the first manufacturer to offer server racks that are directly prepared for water cooling components. Previous solutions consisted of expensive and complicated complete solutions from individual manufacturers with external cooling or you could buy corresponding water cooling sets for which you had to subsequently adapt cases.

Alphacool takes a different approach. The enclosures offer a largely classic interior design. However, special and versatile mounting options for reservoirs, pumps and radiators have been taken into account. A special carrier, which is included with every case, offers the possibility of accommodating radiators directly in the case. Further mounting options for the special and optionally available ES Distroplates allow neat hosing in the case. In this way, other components can also be easily integrated with the Alphacool ES quick connectors.

The Alphacool Eisblock Aurora GPX for AMD Radeon RX 6800 Nitro+ and NVIDIA RTX 3080/3090 XC3 Ultra Gaming graphics cards is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation.

The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. The design is also new! The Eisblock Aurora GPX-A RX 6800 Nitro+ cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. The aRGB LEDs used here give the cooler its very own visual touch.

The Alphacool Eisbaer Pro represents a special variant in the Alphacool AIO range. The standard features of all Alphacool Eisbaer AIOs remain the same. These include the pure copper radiators, the ability to be able to expand the loop with the quick-release fastener and of course the nickel-plated copper cold plate. The new DC-LT 2 pump is used as the pump. This pump is already in use with the GPU AIO Eiswolf 2. A new pump shaft and improved electronics have made the pump even smoother.

The special feature of the Eisbaer Pro is the significantly larger cooler base which was specially developed for AMD Threadripper processors and Intel LGA 3647. However, the Eisbaer Pro also fits the current Ryzen socket AMD AM4. Due to the significantly larger cold plate, AMD Ryzen AM4 CPUs are cooled particularly well as all cores are definitely completely covered by cooling fins.

Alphacool 2-part thermal adhesive is perfect for mounting coolers onto items such as motherboard VRMs. The 2-part epoxy-based adhesive is the optimal choice when coolers need to be mounted more securely onto the CPU or GPU of single-board computers (Raspberry PI, ODROID, Arduino, Cubieboard etc.). The field of application is so wide that even coolers on electronic components in power amplifiers or RC vehicles can be reliably and stably bonded.

Alphacool today presents the Eiswolf 2 AIO solution (Reference design with backplate) for AMD Radeon RX 6800/6800XT/6900 and NVIDIA RTX 3080/3090 graphics cards. As with all of our AIO models, we only use copper radiators, however, for the first time, the Alphacool 360 mm NexXxoS ST30 all-copper radiator will be used in one of our GPU "all-in-one" solutions. For the fans, we now install the new Alphacool Aurora Rise 120 mm fan. The fan impresses with a max. statistical pressure of 3.17 mm/H2O and offers a max. air flow of 119.8m3/h, at a speed range of 0-2500rpm which can be controlled via PWM.

The decision to use the larger radiator in conjunction with our new fans provides a significant increase in cooling performance. The AIO is completed with the Eisblock Aurora water cooler, which actively cools all relevant components such as graphics memory and voltage converters in addition to the GPU chip. All components used (radiator, fan, cooler, DC-LT 2 pump) including connectors and hoses are part of the Alphacool custom cooling range and are therefore available separately. This means that we're not just offering a simple AIO solution here, but a real custom water cooling system (pre-assembled & pre-filled). Only the pump housing for the DC-LT 2 pump is a custom design and not available separately. Today we present only the Reference designs. In the near future, more solutions for graphics cards in custom design from various manufacturers will be available.More pictures follow.

Alphacool introduces four new extremely large radiators. The first two radiators are for 180 or 200 mm fans and are a thickness of 86 mm. The 200 and 400 mm NexXxoS Monsta radiators offer a huge cooling surface. Both radiators have 7x standard G1/4" ports. 6 of the ports are for inlet/outlet and the 7th port is located at the end chamber and can only be used for filling, draining, or bleeding the radiator. The fin density has been reduced from 16 to 12 FPI to allow the use of lower static pressure fans and lower RPMs.

The new Nova 1080 UT60 radiator is a thicker version of the Nova 1080 XT45 radiator. The enormous cooling surface is comparable to three 360 mm UT60 radiators. This makes it easy to cool more than 1000 W of excess heat with extremely quiet to silent spinning fans. This is equivalent to a 64 core AMD Threadripper of the latest generation and at least two GeForce RTX 3090 graphics cards.