Wednesday, June 19th 2019

Thermalright Enters the AIO CLC Market with the Turbo Right Series

Thermalright set the standards for CPU cooling with its iconic tower-type heatsinks through the 2000s. The company finally bit the AIO liquid cooling bullet with the new Turbo Right series. Unlike other closed-loop coolers (CLCs), the Turbo Right ships with a full-copper radiator, in which both the fins and coolant channels are made of copper. The base is made of mirror-finished nickel-plated copper. These coolers come with a fill-port and an extra 100 ml of coolant, so you can replenish it over time. The pump-block features an ornament on top with RGB LED lighting.

For now, the Turbo Right comes in two variants based on radiator size, the Turbo Right 240C, and the Turbo Right 360C, featuring 240 mm x 120 mm and 360 mm x 120 mm radiators, respectively. Depending on the variant, you get two or three TY-121BP 120 mm fans, which take in 4-pin PWM input, spin between 600 to 1,800 RPM, and push between 25.76 to 77.28 CFM of air, with a noise output of 19 to 25 dBA, each. Among the CPU sockets supported are LGA2066, LGA115x, and AM4.
Add your own comment

26 Comments on Thermalright Enters the AIO CLC Market with the Turbo Right Series

#1
btarunr
Editor & Senior Moderator
I know, this is from late-May.
Posted on Reply
#2
BakerMan1971
Being able to top up a CLC is pretty cool, and Thermalright always did do some great air coolers so maybe these will be good.
Posted on Reply
#3
Space Lynx
Astronaut
it bothers me that we live in a society where everything we buy comes with a screwdriver, instead of people just owning one or borrowing one from a neighbor. the waste of our modern existence is astounding at so many levels.

bad example I know, just eh.
Posted on Reply
#4
Crustybeaver
Why is there a picture of a dart board on the CPU block?
Posted on Reply
#5
aktpu
It's a flow indicator
Posted on Reply
#6
Crustybeaver
aktpuIt's a flow indicator
Right. What I'm saying is, couldn't they have made it look less like a dart board?
Posted on Reply
#7
Basard
lynx29it bothers me that we live in a society where everything we buy comes with a screwdriver, instead of people just owning one or borrowing one from a neighbor. the waste of our modern existence is astounding at so many levels.

bad example I know, just eh.
But do you have a THERMALRIGHT branded screwdriver?!
Posted on Reply
#8
GlacierNine
BasardBut do you have a THERMALRIGHT branded screwdriver?!
You laugh, but back in the day (mid 00's) people would actually buy Thermalright coolers because they saw the screwdriver as a value-add - the one they were shipping with coolers like the ultra 120 and the TRUE, was actually a pretty good quality tool with a proper handle, not an L shaped object like most.

I know at least one person that bought an Ultra 120 instead of a Tuniq Tower 120 because they knew installing it with a real screwdriver would be less of a chore.
Posted on Reply
#9
FreedomEclipse
~Technological Technocrat~
CrustybeaverRight. What I'm saying is, couldn't they have made it look less like a dart board?
Whats a flow indicator supposed to look like? If its going to be spinning 2000rpm a minute i dont think it would look much like a dart board after that
Posted on Reply
#10
Crustybeaver
FreedomEclipseWhats a flow indicator supposed to look like? If its going to be spinning 2000rpm a minute i dont think it would look much like a dart board after that
Or more importantly why does it have to display a flow meter? Software alarms and rising temps will be enough to tell you that it's not working!
Posted on Reply
#11
GlacierNine
CrustybeaverOr more importantly why does it have to display a flow meter? Software alarms and rising temps will be enough to tell you that it's not working!
Most users simply don't monitor their temperatures or even have software temperature alerts set up. They will simply be using their computer and it will turn off. In those instances, a flow indicator is simply "A thing that moved before that does not move now" when they reboot the system and could be a useful diagnostic tool.

Secondly, it's aesthetically pleasing.
Posted on Reply
#12
Crustybeaver
GlacierNineSecondly, it's aesthetically pleasing.
Remind me not to ask you for design tips!
Posted on Reply
#13
GlacierNine
CrustybeaverRemind me not to ask you for design tips!
As if I'd share my knowledge with someone who can't even be nice on the internet.

Back to where you came from, bridge-dweller.
Posted on Reply
#14
Crustybeaver
GlacierNineAs if I'd share my knowledge.
Thank you for being considerate and keeping it to yourself.
Posted on Reply
#15
Ruru
S.T.A.R.S.
lynx29it bothers me that we live in a society where everything we buy comes with a screwdriver, instead of people just owning one or borrowing one from a neighbor. the waste of our modern existence is astounding at so many levels.

bad example I know, just eh.
In fact I've lost all my good screwdrivers, and I remember these which come bundled with Thermalright coolers, are fine.
Posted on Reply
#16
skates
Full-copper radiator. This is great and I'll support their effort $$

Did I mention full-copper rad?
Posted on Reply
#17
TheMadDutchDude
I didn’t see it... but this looks like an Enermax rip off.



You can also fill this up yourself.
Posted on Reply
#18
Space Lynx
Astronaut
Chloe PriceIn fact I've lost all my good screwdrivers, and I remember these which come bundled with Thermalright coolers, are fine.
Use Finnish Sisu, become more disciplined, stop losing stuff.
Posted on Reply
#19
crazyeyesreaper
Not a Moderator
TheMadDutchDudeI didn’t see it... but this looks like an Enermax rip off.



You can also fill this up yourself.
Which I believe came after Raijintek released the Orcus which i reviewed a couple years ago now.
Posted on Reply
#20
TheMadDutchDude
I didn't even know about that until you mentioned it. Darn! Everyone copies everyone. :D
Posted on Reply
#21
GlacierNine
TheMadDutchDudeI didn't even know about that until you mentioned it. Darn! Everyone copies everyone. :D
Its not copying, it's OEM manufacturing. Enermax makes their own design, offers to build more of the same, with tweaks, for other manufacturers just like Asetek and coolIT do.
Posted on Reply
#22
Kagaminr
There's a Chinese-market only model, completely different design
Posted on Reply
#23
Vayra86
BakerMan1971Being able to top up a CLC is pretty cool, and Thermalright always did do some great air coolers so maybe these will be good.
Its an AIO, so no, it will be mediocre like all of them, with a price tag that is far too high. Cooling is a simple game of physics, size matters and AIOs lack it.
CrustybeaverRight. What I'm saying is, couldn't they have made it look less like a dart board?
Sure, it can also be a swirly whirlpool sort of thing so you get dizzy staring at it. Anything else? :D
Posted on Reply
#24
freeagent
GlacierNineYou laugh, but back in the day (mid 00's) people would actually buy Thermalright coolers because they saw the screwdriver as a value-add - the one they were shipping with coolers like the ultra 120 and the TRUE, was actually a pretty good quality tool with a proper handle, not an L shaped object like most.

I know at least one person that bought an Ultra 120 instead of a Tuniq Tower 120 because they knew installing it with a real screwdriver would be less of a chore.
The Thermalright screwdriver is sweet, I use it all the time :D It came with Le Grand Macho RT, and is needed, unless you have one long enough.. which is doubtful, but maybe. I cant speak for the Ultra 120, but the Ultra 120 Extreme was better than Tuniq Tower.

As for the Turboright.. I am assuming its to appease the massses, since they are infatuated with these types of coolers..
Posted on Reply
#25
GlacierNine
freeagentThe Thermalright screwdriver is sweet, I use it all the time :D It came with Le Grand Macho RT, and is needed, unless you have one long enough.. which is doubtful, but maybe. I cant speak for the Ultra 120, but the Ultra 120 Extreme was better than Tuniq Tower.

As for the Turboright.. I am assuming its to appease the massses, since they are infatuated with these types of coolers..
The original ultra was outdone by the Tuniq, and the Extreme added two heatpipes to outdo the tuniq, IIRC.
Posted on Reply
Add your own comment
Oct 7th, 2024 16:20 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts