TPU's WCG/BOINC Team

[Velvet Wafer]

lol X2, you never understood what file i wanted you to change

and i wondered about no output

i got your 9600 still up and running ;-)

 

[Chicken Patty]

You got me by a few points this morning velvet, goodjob dude



However my e7200 was off all lastnight. I had the psu with the fan against the bottom of the benchtable. Guess it got too hot or something

 

[Mindweaver]

x2 how do you like that i7 860? have you overclocked it yet?

@CP you getting a 5870? anybody have one or getting one, or maybe the 5850?

 

[Chicken Patty]

Not at the moment mindweaver. But I would like to get one later on

 

[MetalRacer]

x2 how do you like that i7 860? have you overclocked it yet?

@CP you getting a 5870? anybody have one or getting one, or maybe the 5850?

I plan on getting a 5850 as soon as they are available, the 5870 is a little too pricey right now.

 

[p_o_s_pc]

lol X2, you never understood what file i wanted you to change

and i wondered about no output

i got your 9600 still up and running ;-)

there is no chance in me even being close in points today to you. I have had ALL my rigs off today i had to "fog" the house because of spiders..So the rigs had to be covered.

I have your 8800GT running again for you X2

i also have the rigs crunching again. also it is spider free in here now

 

[El Fiendo]

WCG is running on a Q9300 at 100% stock clocks. It's stable in OCCT and a couple other benches and I experience 0 system stability issues so it doesn't look like a faulty core. Every single error is for Human Proteome Folding and it only errors on my Q9300. The E4500 that I also run doesn't have issue with any work unit. Looking at the history of the work units, I see that in most I'm not the only cruncher to encounter an error, I just seem to be hitting alot of them. Any suggestions? I'd rather not throw away 6-12 hours of 1 core's time a day.

As a note, every Human Proteome Folding work unit done by my Q9300 is 'error' where every one done by my E4500 is successful. No other units / projects have errored.

 

[[Ion]]

http://img.techpowerup.org/090925/error log.png

WCG is running on a Q9300 at 100% stock clocks. It's stable in OCCT and a couple other benches and I experience 0 system stability issues so it doesn't look like a faulty core. Every single error is for Human Proteome Folding and it only errors on my Q9300. The E4500 that I also run doesn't have issue with any work unit. Looking at the history of the work units, I see that in most I'm not the only cruncher to encounter an error, I just seem to be hitting alot of them. Any suggestions? I'd rather not throw away 6-12 hours of 1 core's time a day.

As a note, every Human Proteome Folding work unit done by my Q9300 is 'error' where every one done by my E4500 is successful. No other units / projects have errored.

Human Proteome folding is one of the more buggy projects there is, and for that reason I don't run it. There is no real solution so far other than unselecting it in the projects list.

 

[ChaoticAtmosphere]

Hey Guys, Did you miss me??

Sorry. Me and my cruncher sidekick have been slacking of the late but internet account is back up and running now so watch for my contributions to be pulling me back up the ranks!!

Missed all you guys!!

 

[Chicken Patty]

welcome back dude

 

[msgclb]

http://img.techpowerup.org/090925/error log.png

WCG is running on a Q9300 at 100% stock clocks. It's stable in OCCT and a couple other benches and I experience 0 system stability issues so it doesn't look like a faulty core. Every single error is for Human Proteome Folding and it only errors on my Q9300. The E4500 that I also run doesn't have issue with any work unit. Looking at the history of the work units, I see that in most I'm not the only cruncher to encounter an error, I just seem to be hitting alot of them. Any suggestions? I'd rather not throw away 6-12 hours of 1 core's time a day.

As a note, every Human Proteome Folding work unit done by my Q9300 is 'error' where every one done by my E4500 is successful. No other units / projects have errored.

I don't want you to feel left out! This project errors like crazy and as soon as I get 365 days of crunching on this project it will be history. I need 83 more days.

It doesn't seem to error on my Gigabyte DDR3 P45 Q6600 (Vista 32-bit) machine or my MSI K9A2 9950 (XP Pro 32-bit) but it does error like crazy on all my 3 i7s (Vista 64-bit/Windows 7 RC) and a Gigabyte DDR2 P45 Q6600 (Windows 7 RC). I checked and noticed that all of my machines do get some valid WUs.

I just hate to see them pop up but most of the time when they error they do it pretty quickly.

 

[Chicken Patty]

my i7 doesn't do preteom folding, it erros out as well. Guess its common. none of my rigs pass it.

 

[p_o_s_pc]

http://img.techpowerup.org/090925/error log.png

WCG is running on a Q9300 at 100% stock clocks. It's stable in OCCT and a couple other benches and I experience 0 system stability issues so it doesn't look like a faulty core. Every single error is for Human Proteome Folding and it only errors on my Q9300. The E4500 that I also run doesn't have issue with any work unit. Looking at the history of the work units, I see that in most I'm not the only cruncher to encounter an error, I just seem to be hitting alot of them. Any suggestions? I'd rather not throw away 6-12 hours of 1 core's time a day.

As a note, every Human Proteome Folding work unit done by my Q9300 is 'error' where every one done by my E4500 is successful. No other units / projects have errored.

they do fine on my X2s,AXP,P4s but error almost everytime on the Phenom 9500

EDIT:It looks like it does fine on only 1 of the 3 X2s. I don't know what the problem is but i'm not going to keep crunching bad task.

 

[msgclb]

I just noticed that the 2 machines that this project seems to work on run Vista 32-bit and XP Pro 32-bit. The machines that error run either Vista 64-bit or Window 7 64-bit.

 

[p_o_s_pc]

I just noticed that the 2 machines that this project seems to work on run Vista 32-bit and XP Pro 32-bit. The machines that error run either Vista 64-bit or Window 7 64-bit.

The Phenom is on Vista 64bit all the other rigs are on XP pro 32bit... but doesn't seem to matter much. All of them on the vista rig error all the others do about 75% of the time. maybe this info could be helpful to someone

 

[El Fiendo]

I'd continue crunching it but it doesn't error out fast for me. As you can see almost every single one goes for 6-8 hours and still does nothing. Is it possible to remove that project at the machine level (I can take it off the Q9300 but leave it on the E4500) or is it just removed at the user level (El Fiendo never again crunches for Human Proteome Folding)?

Also, my clients mirror the 32bit / 64 bit phenomena. The E4500 obviously being the 32bit OS.

 

[Chicken Patty]

today sucked, my 2nd rig has crunched just over 100 points Not enough memory error when I got back home, and it shut down WCG, CCC stopped responding and all. Adding more RAM now and rebooting.

 

[msgclb]

I just checked the result status for my errors and found that since the 14th almost all the errors are between 0.01 to 0.03 but I did find one that did it at 5.41. Sept 13 and prior there are quite a few with errors from 2 to 4 (correction) hours.

 

[El Fiendo]

Oh, I forgot to mention. The picture up above reports 0.0 CPU time spent on the units but I've witnessed one of the units tie up a core for several hours whilst doing nothing, which is why I say I'm throwing away CPU time with these. I don't know if that means anything or not though.

 

[p_o_s_pc]

today sucked, my 2nd rig has crunched just over 100 points Not enough memory error when I got back home, and it shut down WCG, CCC stopped responding and all. Adding more RAM now and rebooting.

i have never heard of that. I haven't even had that problem with only 512mb that i was running before on my AXP or one of the X2s. But i also upgraded that vary fast. The AXP has 1gb.all the X2s have 2gb running @800+@CL5... how much did you have running?

 

[p_o_s_pc]

I'd continue crunching it but it doesn't error out fast for me. As you can see almost every single one goes for 6-8 hours and still does nothing. Is it possible to remove that project at the machine level (I can take it off the Q9300 but leave it on the E4500) or is it just removed at the user level (El Fiendo never again crunches for Human Proteome Folding)?

Also, my clients mirror the 32bit / 64 bit phenomena. The E4500 obviously being the 32bit OS.

seems to be a bug with 64bit
Also i don't think you can do anything at system level only user level

 

[Chicken Patty]

i have never heard of that. I haven't even had that problem with only 512mb that i was running before on my AXP or one of the X2s. But i also upgraded that vary fast. The AXP has 1gb.all the X2s have 2gb running @800+@CL5... how much did you have running?

1gb on windows 7.

 

[Mindweaver]

Not at the moment mindweaver. But I would like to get one later on

Yea it looks good bro. I want a 2gb version lol

I plan on getting a 5850 as soon as they are available, the 5870 is a little too pricey right now.

yea the 5850 sound like they will be good too.

 

[Mindweaver]

I hope the GTX285 drop in price, and i might get another one. Just sli this one when i get the p55 board and i7 860.

 

[Athlon2K15]

x2 how do you like that i7 860? have you overclocked it yet?

@CP you getting a 5870? anybody have one or getting one, or maybe the 5850?

the chips awesome hits 4.2ghz with ease havent really got used to the bios on this board but i think i could hit 4.6 after tweaking

i also wanted to let pos and velvet know that i forgot 2 switch the client over to pos the other night,so right now im reporting everything for velvet and it will switch over to pos for 2 days and then back to velvet..guys let me know if u get the results