TPU's WCG/BOINC Team

[Velvet Wafer]

best would be i had a strong pump to power it. i sadly dont have, but it doesnt even starve much on the thermaltake one 400 litres. problem are the many "butts" the rad has thru standing on the side. water ist streaming, but not bursting

 

[Mindweaver]

What temps and volts? On the CPU?

 

[Velvet Wafer]

the monster rad is cooling the 939 cruncher atm. im currently finishing my 2 week leak testing. on the 939 cruncher the temps are 50-60 on second core, the main on 45, the whole cpu also. if i take away the load, after 48h+ load duration, it will drop between 1-3 seconds to 32-35 degrees back. and to 25 on the main core and the cpu

my 955 is using the swiftech 240 with magma push pull, 1.408-1.44 volts,maximum 45-50 degrees depending on what i try to achieve

 

[Mindweaver]

the monster rad is cooling the 939 cruncher atm. im currently finishing my 2 week leak testing. on the 939 cruncher the temps are 50-60 on second core, the main on 45, the whole cpu also. if i take away the load, after 48h+ load duration, it will drop between 1-3 seconds to 32-35 degrees back. and to 25 on the main core and the cpu

my 955 is using the swiftech 240 with magma push pull, 1.408-1.44 volts,maximum 45-50 degrees depending on what i try to achieve

Nice! What's the avg room temp?

 

[Velvet Wafer]

about 18-22 degrees, not much

 

[[Ion]]

Nice! With 20C ambients I run about 50C loaded on the Q9400 (stock speeds on GeminII), and 65C on the Pentium M.

 

[Velvet Wafer]

at night, temps drop to 15 degrees and lower here in north germany, atm
during winter, its easy to obtain a 10 degrees room temp,and lower. i only have to open 1 door and 2 windows

 

[hat]

50-60 degrees with that rad?? erm... you mean in fahrenheit? that's avg temp for an air cooler if in celcius imo

 

[p_o_s_pc]

50-60 degrees with that rad?? erm... you mean in fahrenheit? that's avg temp for an air cooler if in celcius imo

I get 55c on a stock AMD cooler (the one with heatpipes) on my overclocked 4200+ so 50c-60 csucks with the big rad then

 

[Duxx]

Appears Anovice is back? Welcome home!

Edit: HAh it looks like everybody moved down a spot! What a jerk!!

 

[Velvet Wafer]

50-60 degrees with that rad?? erm... you mean in fahrenheit? that's avg temp for an air cooler if in celcius imo

I get 55c on a stock AMD cooler (the one with heatpipes) on my overclocked 4200+ so 50c-60 csucks with the big rad then

1.i use a Tt Block and a weak TT pump.
2.i believe the Heatspreader is badly fitted, the other core is at 45 maximum, and whole cpu wont get warmer also. i have testet it with a 4200+ manchester e4 stepping,it reached 42 degrees max on both cores, and 35 degrees max core temp at the same voltage and setup. (the 3800+ is a toledo e6,much newer)

 

[[Ion]]

Appears Anovice is back? Welcome home!

Edit: HAh it looks like everybody moved down a spot! What a jerk!!

I was wondering why I went down a spot

 

[p_o_s_pc]

1.i use a Tt Block and a weak TT pump.
2.i believe the Heatspreader is badly fitted, the other core is at 45 maximum, and whole cpu wont get warmer also. i have testet it with a 4200+ manchester e4 stepping,it reached 42 degrees max on both cores, and 35 degrees max core temp at the same voltage and setup. (the 3800+ is a toledo e6,much newer)

Get a DD or heatkiller block and a stonger pump like a Swiftech 655(i think) i think you would see a great drop in temps

 

[Chicken Patty]

Cool, how are the temps in your room stock? I'm sure winter months will bring higher clocks.



A stable pc is a boring pc..lol

still pretty hot man. The QX is another heat monster bro.

 

[Velvet Wafer]

Get a DD or heatkiller block and a stonger pump like a Swiftech 655(i think) i think you would see a great drop in temps

its only a 939
if i had that much money to even fit custom WC on an old cruncher, i surely would have a phase change on my phenom

 

[theonedub]

My new Q9550 is Crunching strong Just wanted to make sure it would pass its first ~48hrs without issue. I suppose soon I will see how high it will go on stock volts

 

[Chicken Patty]

My new Q9550 is Crunching strong Just wanted to make sure it would pass its first ~48hrs without issue. I suppose soon I will see how high it will go on stock volts

keep us posted

 

[Homeless]

Does anyone know why bionic continues to work even after I close the program? Running Windows 7 not in admin mode if that makes a difference. Didn't have this problem when running Vista in Admin mode

The only way to stop it, is to set it to suspend manually. Is there a way to do this automatically?

 

[theonedub]

I cant remember exactly but after the initial install there is a prompt or pop up that asks if you want to shut it down completely when closing the viewer or to have projects still run. Its been a minute but I think that option is there. Try uninstalling and reinstalling and looking for that prompt.


I have a problem, my client is running Human Pro Folding WUs even though on WCG project manager online I have that particular project disabled. Any ideas? EDIT NM, reviewed my log and for whatever reason there were no WU of other projects avail, so it grabbed those Human Pro WUs.

One other Q, I had edited the CC file to auto update once WU are complete, but it doesn't do it, tired using the file avail in the thread and it didn't work either, no big deal, but still.

 

[ERazer]

need a very cheap quad (775) for crunching for my 3rd rig i got 680 lt mobo any suggestions?

 

[A novice]

Appears Anovice is back? Welcome home!

Edit: HAh it looks like everybody moved down a spot! What a jerk!!

When I leave, you will move back up a spot
Rob

 

[[Ion]]

I cant remember exactly but after the initial install there is a prompt or pop up that asks if you want to shut it down completely when closing the viewer or to have projects still run. Its been a minute but I think that option is there. Try uninstalling and reinstalling and looking for that prompt.


I have a problem, my client is running Human Pro Folding WUs even though on WCG project manager online I have that particular project disabled. Any ideas? EDIT NM, reviewed my log and for whatever reason there were no WU of other projects avail, so it grabbed those Human Pro WUs.

One other Q, I had edited the CC file to auto update once WU are complete, but it doesn't do it, tired using the file avail in the thread and it didn't work either, no big deal, but still.

You have to go to Advanced-->Read config file

 

[theonedub]

You have to go to Advanced-->Read config file

Oh I did that alright, like 50x. Still no go, lol. Worked fine on my other install of Win7x64 not this time though, anything else I should try?

 

[Chicken Patty]

welcome back a novice

 

[A novice]

welcome back a novice

Thanks for the welcome. It’s just a short visit, this time, just to fill in while Mike is away
Rob