TPU's WCG/BOINC Team

[Ion] · Dec 5, 2009

Chicken Patty said:
I'm still working on going lower voltage

Quad, I am getting a AM3 965. The AM3 rig will replace my i7 for daily use. I will then make my i7 strictly a cruncher/bencher . Im thinking about it, but thats the plan. I gotta see how much my bonus is and my check.

Awesome!
Will you OC the i7 again then?

hat said:
They/we certianly do. Forth Eorlingas!

The way I tend to run things (which I believe makes the most sense) is all of my CPUs on WCG, and my GPU(s) on F@H. That way each project gets some help. I think we're actually increasing our buffer against the Canucks, our PPD has been higher than theirs for a decent while now :toast:

Chicken Patty · Dec 5, 2009

[Ion] said:
Awesome!
Will you OC the i7 again then?

The way I tend to run things (which I believe makes the most sense) is all of my CPUs on WCG, and my GPU(s) on F@H. That way each project gets some help. I think we're actually increasing our buffer against the Canucks, our PPD has been higher than theirs for a decent while now

naw, I'll be doing suicide runs with it as it'll be my benching rig. So I need it to stay in tip top shape

Not suicide runs, but I'll be pushing it harder as it'll not be my primary rig you get me?

Velvet Wafer · Dec 5, 2009

Chicken Patty said:
Two or four? Two as in your replaced a dual core with a quad? Anyways, thanks and keep crunching

All three rigs are on and for good folks. Only thing is that I am at stock. No need to put this through abuse. I got another quad coming soon so no need to stress each rig to the max just to squeeze out some points

check out the voltage, that's full load
http://img.techpowerup.org/091204/Capture223320.jpg

Idle:
http://img.techpowerup.org/091204/Capture224069.jpg

exactly. i replaced the e5200

HammerON · Dec 5, 2009

Noctua installed:

Temps down from CM V8:

Both fans are blowing air towards the rear exhaust. Kind of a tight fit, had to remove the top 120mm fan...

[Ion] · Dec 5, 2009

Wow, that HSF is a monster! And I though my GeminII was big :eek:

Do you plan on OCing more now that you've been able to lower the temps?

Velvet Wafer · Dec 5, 2009

HammerON said:
Noctua installed:

http://img.techpowerup.org/091205/IMG_0118.jpg

Temps down from CM V8:

http://img.techpowerup.org/091205/Capture008.jpg

http://img.techpowerup.org/091205/Capture007.jpg

Both fans are blowing air towards the rear exhaust. Kind of a tight fit, had to remove the top 120mm fan...

you need a scythe kaze slim fan now.

HammerON · Dec 5, 2009

Good point Velvet~ Thanks :toast:

Wile E · Dec 5, 2009

[Ion] said:
The way I tend to run things (which I believe makes the most sense) is all of my CPUs on WCG, and my GPU(s) on F@H. That way each project gets some help. I think we're actually increasing our buffer against the Canucks, our PPD has been higher than theirs for a decent while now

That's how I run here as well, with the ps3 thrown in for folding, just for good measure.

Flak · Dec 5, 2009

Passed 2k today.

Chicken Patty · Dec 5, 2009

Paulieg said:
Twisting the knife again with my golden chip Should have never sold that damn thing. Anyways, I think I had it at 1.18v on 3.8ghz stable. That seemed to give me the best mix of power without heating up the chip too much.

The base camp trek is over tomorrow. I'll be coming back home in the afternoon.

Welcome back Paul :toast:

Velvet Wafer said:
exactly. i replaced the e5200

Awesome

I just got my AMD mobo today, muahahahaha.

Flak said:
Passed 2k today.

Congrats man :toast:

HammerON said:
Noctua installed:

http://img.techpowerup.org/091205/IMG_0118.jpg

Temps down from CM V8:

http://img.techpowerup.org/091205/Capture008.jpg

http://img.techpowerup.org/091205/Capture007.jpg

Both fans are blowing air towards the rear exhaust. Kind of a tight fit, had to remove the top 120mm fan...

Sissy!

Why not add a 3rd fan up front of the cooler? :shadedshu

Flyordie · Dec 5, 2009

Oh yeah... Lets see whats up here... :-|

Wile E · Dec 5, 2009

Are you posing a question, or making a statement? If so, what is the question or statement? I don't quite follow. lol.

Flyordie · Dec 5, 2009

Wile E said:
Are you posing a question, or making a statement? If so, what is the question or statement? I don't quite follow. lol.

Question. Why is WCG not sending meh unitz?

Wile E · Dec 5, 2009

Flyordie said:
Question. Why is WCG not sending meh unitz?

I dunno. Shut off SETI if you want WCG that bad.

Flak · Dec 5, 2009

How does the updating work, cause I also passed my 4k milestone as well....

4x4n · Dec 5, 2009

So, I now have rig dedicated to TPU WCG/F@H. My work came through with an unexpected bonus, plus I was able to get this together pretty cheap. I picked up a Giggy UD4P with a bunch of bent pins for $30 and was able to get it going. Then got a 920 for $225, ram from Paulie for $100, already had hd, gpu, psu. Running the rc of W7 for now. Not enough to grab some pie, but a decent contribution to the team. Here is a screenie, notice my temps. It's on a shelf in my garage with about 56f ambient right now.

[Ion] · Dec 5, 2009

Awesome!

There goes my chance of being able to overtake you

Sounds like I'm going to need to upgrade some more

BTW, is that an 8800GT/8800GTS 512mb/9800GT(X)(+)? That's the same PPD I get on my OCed 8800GT

4x4n · Dec 5, 2009

8800GT with shaders at 1724. I did have 2 GTX260's but sold one and one died

But I still like the 8800GT-GTS and GTS250's as performance per watt. I'm pulling 314w with this and I was over 400 with the 260. Plus I had to run the fan at 80% and it was loud as hell. With the 8800 I have an accelero and a low speed yate.

[Ion] · Dec 5, 2009

That's the same shader speed I run on my 8800GT, and about the same PPD as well

HammerON · Dec 5, 2009

Chicken Patty said:
We should battle it with my Mega Shadow

Okay CP, Noctua NH-D14 versus Mega Shadow.Let's test at stock (default) and run 5 passes of LinX and IntelBurn Test.
Then we can choose an oc to test at.
Sound like a plan?
I would prefer not to have the rig not crunching for a long period of time though

PaulieG · Dec 6, 2009

HammerON said:
Okay CP, Noctua NH-D14 versus Mega Shadow.Let's test at stock (default) and run 5 passes of LinX and IntelBurn Test.
Then we can choose an oc to test at.
Sound like a plan?
I would prefer not to have the rig not crunching for a long period of time though

I REALLY want to see this. I'm running 2 Mega's right now, but I've been very close to buying a Noctua NH-D14. Let's see some results!!

HammerON · Dec 6, 2009

Paulieg said:
I REALLY want to see this. I'm running 2 Mega's right now, but I've been very close to buying a Noctua NH-D14. Let's see some results!!

Results coming from me shortly. Just running benches at 4.0 GHz. Temps looking really good right now :toast:

I am not sure if CP wants to play or not :cry:

Chicken Patty · Dec 6, 2009

Flak said:
How does the updating work, cause I also passed my 4k milestone as well....

What updating exactly are you talking about?

4x4n said:
So, I now have rig dedicated to TPU WCG/F@H. My work came through with an unexpected bonus, plus I was able to get this together pretty cheap. I picked up a Giggy UD4P with a bunch of bent pins for $30 and was able to get it going. Then got a 920 for $225, ram from Paulie for $100, already had hd, gpu, psu. Running the rc of W7 for now. Not enough to grab some pie, but a decent contribution to the team. Here is a screenie, notice my temps. It's on a shelf in my garage with about 56f ambient right now.

http://img.techpowerup.org/091205/tpu.jpg

.

Thanks a lot bro, that was a heck of deal you got going there :toast:

Thanks a lot for helping out dude :rockout:

HammerON said:
Results coming from me shortly. Just running benches at 4.0 GHz. Temps looking really good right now
I am not sure if CP wants to play or not

Sorry bro, I was out all day.

Hammer, is your setup in an open case or in a closed case. let me know so I know to run it with side panel off or on. I am undervolted at stock as well. I can do a run like that and then you can undervolt as well. Default voltages might not be the same anyways for us. Let me know bro. We need to create a thread for this.

[Ion] · Dec 6, 2009

My output was a bit lower today, I had some issues on the Q9400 that resulted in all 4 tasks being aborted :mad:

Hopefully things are fixed now, we'll see tomorrow morning :ohwell:

Chicken Patty · Dec 6, 2009

[Ion] said:
My output was a bit lower today, I had some issues on the Q9400 that resulted in all 4 tasks being aborted
Hopefully things are fixed now, we'll see tomorrow morning

Keep us posted bro, let us know if the issue has been fixed :toast:

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch Ultrawide 75Hz (Desk Games) // SAMSUNG 49-Inch Ultrawide 144Hz (Sim Racing Rig)
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

TPU's WCG/BOINC Team

[Ion]

WCG Team Assistant

Chicken Patty

Velvet Wafer

HammerON

The Watchful Moderator

[Ion]

WCG Team Assistant

Velvet Wafer

HammerON

The Watchful Moderator

Wile E

Power User

Flak

Chicken Patty

Flyordie

Wile E

Power User

Flyordie

Wile E

Power User

Flak

4x4n

Xtreme Refugee

[Ion]

WCG Team Assistant

4x4n

Xtreme Refugee

[Ion]

WCG Team Assistant

HammerON

The Watchful Moderator

PaulieG

HammerON

The Watchful Moderator

Chicken Patty

[Ion]

WCG Team Assistant

Chicken Patty

System Name	The ClusterF**k
Processor	980X @ 4Ghz
Motherboard	Gigabyte GA-EX58-UD5 BIOS F12
Cooling	MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory	3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s)	Evga GTX 580
Storage	Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s)	HP LP2475w 24" 1920x1200 IPS
Case	Technofront Bench Station
Audio Device(s)	Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply	ENERMAX Galaxy EVO EGX1250EWT 1250W
Software	Win7 Ultimate N x64, OSX 10.8.4

System Name	Budget AMD System
Processor	Threadripper 1900X @ 4.1Ghz (100x41 @ 1.3250V)
Motherboard	Gigabyte X399 Aorus Gaming 7
Cooling	EKWB X399 Monoblock
Memory	4x8GB GSkill TridentZ RGB 14-14-14-32 CR1 @ 3266
Video Card(s)	XFX Radeon RX Vega₆⁴ Liquid @ 1,800Mhz Core, 1025Mhz HBM2
Storage	1x ADATA SX8200 NVMe, 1x Segate 2.5" FireCuda 2TB SATA, 1x 500GB HGST SATA
Display(s)	Vizio 22" 1080p 60hz TV (Samsung Panel)
Case	Corsair 570X
Audio Device(s)	Onboard
Power Supply	Seasonic X Series 850W KM3
Software	Windows 10 Pro x64

Processor	3950x
Motherboard	Asus ROG Strix X570-E
Cooling	Custom water
Memory	4x8gb Corsair Dominator
Video Card(s)	Sapphire Nitro RX580
Storage	Adata XPG SX8200 Pro
Display(s)	Asus 24"
Case	Phanteks Evolve X
Power Supply	Seasonic 650

Processor	5800x(2)/5700g/5600x/5600g/2700x/1700x/1700
Motherboard	MSI B550 Carbon (2)/ MSI z490 Unify/Asus Strix B550-F/MSI B450 Tomahawk (3)
Cooling	EK AIO 360 (2)/EK AIO 240, Arctic Cooling Freezer II 280/EVGA CLC 280/Noctua D15/Cryorig M9(2)
Memory	32 GB Ballistix Elite/32 GB TridentZ/16GB Mushkin Redline Black/16 GB Dominator
Video Card(s)	Asus Strix RTX3060/EVGA 970(2)/Asus 750 ti/Old Quadros
Storage	Samsung 970 EVO M.2 NVMe 500GB/WD Black M.2 NVMe 500GB/Adata 500gb NVMe
Display(s)	Acer 1080p 22"/ (3) Samsung 22" 1080p
Case	(2) Lian Li Lancool II Mesh/Corsair 4000D /Phanteks Eclipse 500a/Be Quiet Pure Base 500/Bones of HAF
Power Supply	EVGA Supernova 850G(2)/EVGA Supernova GT 650w/Phantek Amps 750w/Seasonic Focus 750w
Mouse	Generic Black wireless (5)
Keyboard	Generic Black wireless (5)
Software	Win 10/Ubuntu