Your PC ATM

[ALI3NTIG3R]

Yeah ok

I take it you've never over-clocked ever

Never a GPU yeah, CPU : E6400 2.13Ghz @ 3.2Ghz - 53°C Burn 1H on OCCT

 

[(FIH) The Don]

well if its shipped then its even better

 

[ste2425]

Any body know if this is a good deal?

id say thats really good i paid £30 for a 500gb wd with the same specs, so going of the 500gb is half a TB that should be £60 or $91 so id says thats good yea.
edit: i was a bit late there

 

[pantherx12]

Yeah ok



Never a GPU yeah, CPU : E6400 2.13Ghz @ 3.2Ghz - 53°C Burn 1H on OCCT

The 4890 is an over-clockers card in my opinion anyway ( since it was first card people could et to 1ghz)

so if you don't plan on over-clocking getting the nice quiet, cool running, power efficient and smaller card would make more sense heh.


Of course it is your money to spend though, just throwing some shapes your way, up to you what you do with them XD

 

[ALI3NTIG3R]

LOL, i see yeah ^^.

Prolimatech MK-13 is my friend if i want to overclock .

 

[pantherx12]

It comes with very poor ramsinks/mosfet sinks by the by.

I would recommend thermalrights t-rad 2 which performs the same and costs half the price, its also small enough that if you run it passively ( say you have a side panel fan) that it only takes up 1 slot : ]

I've run mine passively on a 3850 and 4850, the 4850 had temps of 35idle and 59 load that way.

Not bad

Pretty huh?

 

[ALI3NTIG3R]

Ah ah.

Thanks for advices mate.

 

[(FIH) The Don]

T-rads are just win win

 

[pantherx12]

No problem, its what I, and the rest of this forum are here for : ]

 

[brandonwh64]

OK pissed once again! man my luck has gotten so shitty latly!

I ordered a Logisys dual 12 inch RED cathode kit from petras shop. well they arrived today and i installed them. turned on the computer and BAM! DOA! so i take them out and restart the computer. well while i was packing it back up for RMA i noticed my computer kept shutting down? so i go and check and i mistakenly unplugged the water pump the only thing that kept saving it was realtemp with a custom shutdown .BAT file i made wouldnt let it go over 75 deg.

man im starting to think my luck is run out

 

[(FIH) The Don]

go to bed man, you should NOT see the rest of this day

wake up tomorrow and get a fresh start on thing

 

[brandonwh64]

Im seriously considering it! i bet its all because i didnt have any coffee today

 

[(FIH) The Don]

oh man, that is NOT good, go fetch....NOW!

 

[brandonwh64]

well if i drink coffee right now then ill be up for a while

 

[(FIH) The Don]

what time is it where you are?

its 10 at night here

 

[brandonwh64]

its 4:28pm here

 

[(FIH) The Don]

thats not late? go fetch som coffee, i dont know the difference between am and pm though:S

woot woot

Yikes just saw the dust in the 5770s on the picture, even though they run at like 35c in idle and 65c in load

and would you trust me if i say that those 2 4850s gets a score of 19260 06 point out of the box and cpu at 3.7

 

[CDdude55]

Yes, i am using the stock heatsink fan, but i put MX-3 under it. It actually cools pretty well.

Quick pic of the outside of the case(its a CM690), the case behind it is a Thermaltake Kandalf

 

[(FIH) The Don]

finally i get to see that setup of yours CD

the stock fan i decent for temp use, i just couldnt live with it for very long

 

[brandonwh64]

Nice CD! when are you gonna get a aftermarket cooler? you can get some good clocks with that D0!

 

[johnnyfiive]

thats not late? go fetch som coffee, i dont know the difference between am and pm though:S

woot woot

Yikes just saw the dust in the 5770s on the picture, even though they run at like 35c in idle and 65c in load

and would you trust me if i say that those 2 4850s gets a score of 19260 06 point out of the box and cpu at 3.7

http://img.techpowerup.org/100226/IMG_3876.jpg

omg... so dirty! Compressed air, pronto!!!

I totally forgot to post this picture btw!

 

[mlee49]

Yes, i am using the stock heatsink fan, but i put MX-3 under it. It actually cools pretty well.

http://img.techpowerup.org/100226/DSCN0144.jpg

Quick pic of the outside of the case(its a CM690), the case behind it is a Thermaltake Kandalf
http://img.techpowerup.org/100226/DSCN0136.jpg

Well how do you feel? Glad your setup is finally together. What does your ram run at? Are those OCZ's any good? I've never bought any so I'm not sure what to think.

 

[CDdude55]

Well how do you feel? Glad your setup is finally together. What does your ram run at? Are those OCZ's any good? I've never bought any so I'm not sure what to think.

Very happy the rig is finally finished after all the waiting.

My RAM are supposed to run at 1333mhz(timings: 7-7-7-24) but with my overclocked i7 they're are about 1233mhz or so, so OCZ has been good to me overall in terms of stability. I don't tinker alot with the RAM speed or settings, so im not to sure how they overclock. But i would personally recommend them.

 

[HammerON]

omg... so dirty! Compressed air, pronto!!!

I totally forgot to post this picture btw!

http://img.techpowerup.org/100226/j5_cathodes.jpg

That looks just sick
Nice picture there!

 

[Yukikaze]

Very happy the rig is finally finished after all the waiting.

My RAM are supposed to run at 1333mhz(timings: 7-7-7-24) but with my overclocked i7 they're are about 1233mhz or so, so OCZ has been good to me overall in terms of stability. I don't tinker alot with the RAM speed or settings, so im not to sure how they overclock. But i would personally recommend them.

I have several sets of OCZ DDR3 as well. I find them as good sticks in general, but they aren't amazing. My 6x2GB kit is rated at 1.65v, 1600Mhz, CL7-7-7-24. I am running it at 1.62v at 1333Mhz with CL6-6-6-15 and I've had them at 1866Mhz with CL8-8-8-24. Those are good clocks, but nothing extraordinary - except for the price: The 6x2GB kit was 190$ on ebay about a year ago.