You are very welcome V.W. Actually not a brand new board though.It's had an Unlocked 550 callisto Running all 4 cores at 3.4 for the last 5 months 24/7.I just went through and updated 4 of my crunchers to DDR3 boards.All 4 boards were the 785 gtm's like the one you recieved.They all ran very stable and trouble free when i left the cpu v on auto.For some reason the board always supplied 1.39-1.4 v on auto setting.Be warned though,the one time i did give a voltage bump i ended up with this.
TPU's WCG/BOINC Team.
Glad you recieved the package in good shape and without any hassle.The best part for me though is i learned how to say MERRY CHRISTMAS in German.
Enjoy!!! Fröhliche Weihnachten
And as a little side note.Just took this reading about 5 minutes ago.It's so freekin nice to be able to crunch without the air conditioner running.
techPowerUp! Forums
Sounds fine, except the explosion and fire part.
but thats okay, i wont overdue it, i hope.
quads tend to do that to weaker pwms, especially if they are not cooled enough (ex-biostar 790gx + unsupported 955 user
)
thanks for the warning, that will keep me from feeding 1.5v to the cpu definetly
you have any recommendation for an am3 CPU which is most powerful for crunching but also heavily efficient and cheap?
which model would you take, if you had the choice again?
(also consider unlocking, that would be also very,very cool)
the shipping went perfectly, i think we now have found an ideal way to get things here without customs trouble!
Package was in PERFECT shape, also!
not kicked by boots or so, like mailmans mail was once
You are a very heartful guy, you even looked up merry christmas in german to make the package look indistinguishable from a real present... in fact it was a real present, the real guise as a disguise!
Thanks again Bro! i also hope you will have wonderful moments and great fun this winter/christmas with your loved people and parts!
nice temps, for me it is only -2, but that was enough to get the main rig at 28c load!
hope it gets even colder so i can finally crack the 4.3 and become the fastet watercooled phenom in the whole forums
EDIT: its now official, my Super Talent Ultradrive GX2 is toast.
after about 12000 write cycles,shown 75% drive life !Just! after installing 7 again on it, it bsoded a last time and was never detected anymore, not even by ST´s own flash utility. im going to RMA it tomorrow.