SLI with different cards

[blibba]

How about just believing someone when they tell you, or ask for pictures in a polite manner.

Just saying. No offence meant whatsoever.

Pics or it didn't happen, and you select pics. Good choice, sir.

I'm even more surprised in this case, the 470 is not GF110 as you say , but the closely related GF100.

I note that you had to use a modded driver.

Is there a list anywhere of valid combinations of cards?

Fair point, I suppose. I meant it tongue in cheek, but looking back, it was a tad obnoxious. My apologies.

 

[Slizzo]

Tried this with my GTX 690 and with a new GTX 660, didn't seem to work.

The install batch runs perfectly, but i can't sli them together in nvidia control panel

What version of Windows do you have? Wasn't there a limitation on the amount of GPUs you can run in SLI on certain versions of Windows?

 

[Snuffy10]

What version of Windows do you have? Wasn't there a limitation on the amount of GPUs you can run in SLI on certain versions of Windows?

I am running Windows 7 64 bit home premium

MB is Asrock z77 extreme p4

 

[KripTed]

if using DifferentSLI....does HyperSLI need to be installed? no one really answered me, id like to know, no reasons having HyperSLI installed if its not needed. thanks.

 

[Yimmeryams]

if using DifferentSLI....does HyperSLI need to be installed? no one really answered me, id like to know, no reasons having HyperSLI installed if its not needed. thanks.

No. DifferentSLI does not require HyperSLI to work.

 

[DiogoCDS19]

if using DifferentSLI....does HyperSLI need to be installed? no one really answered me, id like to know, no reasons having HyperSLI installed if its not needed. thanks.

Not sure, but if your motherboard doesn't support SLI I think you need to use HyperSLI.

 

[Yimmeryams]

Not sure, but if your motherboard doesn't support SLI I think you need to use HyperSLI.

I think he has a Z77 board. It should work fine.

EDIT: It is very possible that it will NOT work fine.

 

[KripTed]

yah i have a Z77 Pro 3 board. supports crossfire. but yah i always turn off hypersli in task manager and SLI still works..so im assuming i dont need it. so ill just uninstall it and see. thanks for the reply guys

 

[Yimmeryams]

yah i have a Z77 Pro 3 board. supports crossfire. but yah i always turn off hypersli in task manager and SLI still works..so im assuming i dont need it. so ill just uninstall it and see. thanks for the reply guys

I just looked up your board (assuming ASRock Z77 Pro3 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard), and the Newegg page does not list any native SLI support.

You'll probably need HyperSLI still. I am sorry for telling you something incorrect.

 

[KripTed]

well ..i start the pc up as hypersli. when windows loads. i terminate the hypersli process and SLI still works..hmm

 

[DiogoCDS19]

well ..i start the pc up as hypersli. when windows loads. i terminate the hypersli process and SLI still works..hmm

Probably because your already "in", if you really want to try before uninstalling.
At the Windows selection screen, instead of picking the one that says HyperSLI, go for the other one.
Should be pretty much the same as if it were disabled.

 

[JulioCesarSF]

HI.

Is it possible to use SLI GTX 680 + GTX 660ti? It's just to benchmark.

So a 3-way. HyperSLI can enable 3-way? I need this modded+hypersli.

What about 314.07?

 

[KripTed]

Probably because your already "in", if you really want to try before uninstalling.
At the Windows selection screen, instead of picking the one that says HyperSLI, go for the other one.
Should be pretty much the same as if it were disabled.

ya i tried booting without hypersli...doesn't work, i had to reinstall drivers and shit, and modded drivers, but ya, still didn't work. so i guess ill go back to HyperSLI. just disable the taskbar icon, cause it still works, even when the taskbar icon of HyperSLI is gone

 

[Yimmeryams]

ya i tried booting without hypersli...doesn't work, i had to reinstall drivers and shit, and modded drivers, but ya, still didn't work. so i guess ill go back to HyperSLI. just disable the taskbar icon, cause it still works, even when the taskbar icon of HyperSLI is gone

You could also try going into the options and unchecking "Automatic run HyperSLI control panel when Windows starts". I don't know what it does, but you could always try it and see what happens.

 

[Vizi]

Hellou guys,
I wonder, if latest drivers for DifferentSLI (my SLI evga GTX680 2GB - asus GTX680 4GB in MB ASROCK Z77 Extreme6), are still 310.70 ? I have problem activate SLI among these due to the different vram.

thx for reply

 

[DiogoCDS19]

Hellou guys,
I wonder, if latest drivers for DifferentSLI (my SLI evga GTX680 2GB - asus GTX680 4GB in MB ASROCK Z77 Extreme6), are still 310.70 ? I have problem activate SLI among these due to the different vram.

thx for reply

Yes, those are the latest modded drivers, are you having problems activating SLI or just asking about the latest drivers ?

 

[Vizi]

Yes, those are the latest modded drivers, are you having problems activating SLI or just asking about the latest drivers ?

I wonder the driver to the latest for DifferentSLI. Pity are not, later on this year 2013, recommended for Crysis 3 and next new game. I have evga GTX680 2GB - asus GTX680 4GB in MB ASROCK Z77 Extreme6 and I can not put into operation SLI in NVidia control panel and I want to try DifferentSLI, hopefully will be lucky.

 

[DiogoCDS19]

I wonder the driver to the latest for DifferentSLI. Pity are not, later on this year 2013, recommended for Crysis 3 and next new game. I have evga GTX680 2GB - asus GTX680 4GB in MB ASROCK Z77 Extreme6 and I can not put into operation SLI in NVidia control panel and I want to try DifferentSLI, hopefully will be lucky.

Yeh, thats the only way. You have to use those modded drivers, just follow the instructions.
Its pretty simple and good luck

 

[Vizi]

One more question
will be possible to use Nvidia surround + SLI with different cards, does anyone know ? thx
When I used with coolbits register, so was freeze system.

 

[RAIN0326]

ge force gtx 660ti and ge force gtx 460 on SLI

I have a pair of ge forces one is a gtx 660 Ti with 3Gb DDR5 and the other on is a gtx 460 with 1GB DDR5 would they work ,,,

 

[casparoff]

It works on a Windows 8?

 

[DiogoCDS19]

It works on a Windows 8?

Yes

 

[Whitestar]

Hi, some questions to see if I understand this correctly:

If I SLI an Asus GeForce GTX 670 Direct CU II 4GB DDR5 and a ZOTAC GeForce GTX 670 4GB PhysX CUDA then I can do so with only the official driver, correct? I don't need a modified driver?

How will the increased clock on the ASUS manifest itself in performance?

 

[blibba]

Hi, some questions to see if I understand this correctly:

If I SLI an Asus GeForce GTX 670 Direct CU II 4GB DDR5 and a ZOTAC GeForce GTX 670 4GB PhysX CUDA then I can do so with only the official driver, correct? I don't need a modified driver?

How will the increased clock on the ASUS manifest itself in performance?

You can use the official driver, yes. The increased clock on the Asus will essentially be wasted, though you could try BIOS flashing the Zotac to a similar clock speed (having first tested for viability using software overclocking).

 

[Whitestar]

You can use the official driver, yes. The increased clock on the Asus will essentially be wasted, though you could try BIOS flashing the Zotac to a similar clock speed (having first tested for viability using software overclocking).

Thanks, sounds good.
Nice avatar! Would really hate to encounter that one in the wild, haha.

So basically I can go with the "regular" (non-DirectCUII) ASUS 4GB then. You wouldn't happen to know if the ASUS is fatter than the Zotac? Wondering if it would occupy too much space in my Asus P8P67 Deluxe. Looks like it's almost the same size, but hard to tell.