Raevenlord
News Editor
- Joined
- Aug 12, 2016
- Messages
- 3,755 (1.28/day)
- Location
- Portugal
System Name | The Ryzening |
---|---|
Processor | AMD Ryzen 9 5900X |
Motherboard | MSI X570 MAG TOMAHAWK |
Cooling | Lian Li Galahad 360mm AIO |
Memory | 32 GB G.Skill Trident Z F4-3733 (4x 8 GB) |
Video Card(s) | Gigabyte RTX 3070 Ti |
Storage | Boot: Transcend MTE220S 2TB, Kintson A2000 1TB, Seagate Firewolf Pro 14 TB |
Display(s) | Acer Nitro VG270UP (1440p 144 Hz IPS) |
Case | Lian Li O11DX Dynamic White |
Audio Device(s) | iFi Audio Zen DAC |
Power Supply | Seasonic Focus+ 750 W |
Mouse | Cooler Master Masterkeys Lite L |
Keyboard | Cooler Master Masterkeys Lite L |
Software | Windows 10 x64 |
Power users sometimes really go the extra mile towards achieving the best performance on their hardware. And sometimes, this process includes delidding, as in, removing the processor's Integrated Heatspreader (IHS). This would allow for users to sometimes replace less than perfect TIM (Thermal Interface Material) companies use, achieving lower operating temperatures, and possibly even higher overclocks.
Well, you really shouldn't try to do so with AMD's Ryzen 7. The reason: attempting to delid said processors cost overclocking genius der8auer a grand total of 3 (three!) Ryzen 7 samples before he managed to do it without damaging the processor. This happens because contrary to other CPUs, AMD's Ryzen 7 IHS comes soldered to the chip, which obviously increases difficulty and risk of such a delidding process. Apparently, AMD did a pretty good job with the thermal interfaces of Ryzen 7 anyway - der8auer achieved only a 2ºC decrease in operating temperatures on the delidded Ryzen sample. Long story short: maybe it's not worth it. Especially if your cooling solution of choice isn't able to achieve proper contact with the CPU after the process. You can see a video of the direct cooling test, after the break.
View at TechPowerUp Main Site
Well, you really shouldn't try to do so with AMD's Ryzen 7. The reason: attempting to delid said processors cost overclocking genius der8auer a grand total of 3 (three!) Ryzen 7 samples before he managed to do it without damaging the processor. This happens because contrary to other CPUs, AMD's Ryzen 7 IHS comes soldered to the chip, which obviously increases difficulty and risk of such a delidding process. Apparently, AMD did a pretty good job with the thermal interfaces of Ryzen 7 anyway - der8auer achieved only a 2ºC decrease in operating temperatures on the delidded Ryzen sample. Long story short: maybe it's not worth it. Especially if your cooling solution of choice isn't able to achieve proper contact with the CPU after the process. You can see a video of the direct cooling test, after the break.
![](https://www.techpowerup.com/img/17-03-10/3bfcbae37b1e_thm.jpg)
![](https://www.techpowerup.com/img/17-03-10/bc345e6356e6_thm.jpg)
![](https://www.techpowerup.com/img/17-03-10/bcfa43d95802_thm.jpg)
View at TechPowerUp Main Site