The Ultimate Realtek HD Audio Driver Mod for Windows 10

[Deleted member 179922]

아날로그 잭 = Analog jack
3.5mm 잭 왼쪽 패널 = 3.5mm jack left panel

I set it to another audio stream in the Realtek control panel to use special sound. but 3.5mm jack does not go to the "Realtek HD Audio 2nd output" but is picked up by another analog jack. How do you do it? Help!

 

[totalpow]

Hi I have a msi z370 a pro mobo with realtek audio would like to download modified version of drivers and setup to try out ,what would be the latest download? Thks

Anyone pls thks

 

[night_mare007]

I hope someone can give me ideas for this "issue"....
my 5.1 speakers are position in different distance from me - so I MUST balanced them out - and I want to do so using SW ( since I can't balanced them (R/L) using either the digital decoder or the analog amplifier ).

So I know windows/realtek has a R/L balance option... so far so good, UNTIL THE SYSTEM VOLUME GET LOWERED TO ZERO -> then, the balance setup GET RESET TO BE EQUAL TO ALL CHANNELS ! ( either by going into the system's mixer app OR realtek's panel ).
as I already stated in previous posts, I use SB720, but it does NOT (& can not ) detects that I have 5.1 system under SB720's "setup"-> "speaker" screens. ( so I can only get "stereo" setup ).
(Please remember that digital output's "speaker configuration" is NOT available under playback devices, in contrast to analog devices )

So right now I can only R/L balance the FRONT CHANNELS only using SB720 - not the REAR ( which I want to ).
as I mentioned above - using window's mixer ( which can balanced each channel of the 5.1 ) balance setup gets reset when volume gets down to zero ( or close to it ).

Do you know of a windows app that can retain the speakers balance setup for individual channels after volume get raised from zero ( for digital output of course ) ?

Images to emphasis the issue:

Spoiler

1. Balance was set

Spoiler

2. then MAIN system's volume get lowered to zero ( not mute )

Spoiler

3. The volume being rise again - but the previous balance setup was suddenly get lost/forgot by the system.

Spoiler

 

[OMER]

I hope someone can give me ideas for this "issue"....
my 5.1 speakers are position in different distance from me - so I MUST balanced them out - and I want to do so using SW ( since I can't balanced them (R/L) using either the digital decoder or the analog amplifier ).

So I know windows/realtek has a R/L balance option... so far so good, UNTIL THE SYSTEM VOLUME GET LOWERED TO ZERO -> then, the balance setup GET RESET TO BE EQUAL TO ALL CHANNELS ! ( either by going into the system's mixer app OR realtek's panel ).
as I already stated in previous posts, I use SB720, but it does NOT (& can not ) detects that I have 5.1 system under SB720's "setup"-> "speaker" screens. ( so I can only get "stereo" setup ).
(Please remember that digital output's "speaker configuration" is NOT available under playback devices, in contrast to analog devices )

So right now I can only R/L balance the FRONT CHANNELS only using SB720 - not the REAR ( which I want to ).
as I mentioned above - using window's mixer ( which can balanced each channel of the 5.1 ) balance setup gets reset when volume gets down to zero ( or close to it ).

Do you know of a windows app that can retain the speakers balance setup for individual channels after volume get raised from zero ( for digital output of course ) ?

Images to emphasis the issue:

Spoiler

1. Balance was set

Spoiler

View attachment 104485

2. then MAIN system's volume get lowered to zero ( not mute )

Spoiler

View attachment 104486

3. The volume being rise again - but the previous balance setup was suddenly get lost/forgot by the system.

Spoiler

View attachment 104487

To set 7.1 config, go to speaker properties, click on below configure button, there use can set it to 7.1

 

[night_mare007]

To set 7.1 config, go to speaker properties, click on below configure button, there use can set it to 7.1

Thnx for the willing to help... but please note that I already wrote:

(Please remember that digital output's "speaker configuration" is NOT available under playback devices, in contrast to analog devices )

 

[PSYRECX]

Windows updated some things last night, and now this is what connect looks like. It goes back to it's normal screen if I uninstall the realtek drivers, but it still has the little blue cannot find device thing and none of the settings effect the audio, that is, if it even allows me to change them. I tried installing the APO driver with a fresh install of the realtek's, but this is all I see.

Any fixes?

 

[Diogo Silva]

Windows updated some things last night, and now this is what connect looks like. It goes back to it's normal screen if I uninstall the realtek drivers, but it still has the little blue cannot find device thing and none of the settings effect the audio, that is, if it even allows me to change them. I tried installing the APO driver with a fresh install of the realtek's, but this is all I see.

Any fixes?

YOU NEED .KGA FiLES to Creative Programs work perfectly (View my old post)

OR

What version of APO Driver you install?
The last is this: 2.1.3 (x64)

OR

Install the Version UWP of Creative Connect (WORKS ONLY WINDOWS 10)
Windows Service (NO INSTALL IF you update your APO driver, Windows Service is included in APO)
App

OR

Try install another mod compatible with Creative (I Recommend This - Modder: @alanfox2000)

 

[Hemant]

Will you try to complete the DAX3?

Can you please give me the detailed instructions, how to install it?

 

[Oluwatobi]

Hi guys! I did a clean install of windows 10 before then i was using Alan's modded realtek hda 8403 driver with dolby uwp app, dts studio desktop application and soundblaster 720. I have read through the three threads and i am a lot more confused. I want to install the latest dolby uwp app, dts uwp app and soundblaster uwp app. I do not know if i am to still install the same modded driver or using microsoft default high definition driver? Thanks

 

[Hemant]

Link folder is empty

 

[Diogo Silva]

Link folder is empty

What Link?

 

[Nmitsia]

What Link?

Link is down. Please reupload latest version.

 

[chrisnfs93]

hi guys, im new in this forum, i want to install viper4windows, but i read on the site wich it cant support realtek hd drivers, i installed to try and it not works... So we have a solution for this?

 

[night_mare007]

hi guys, im new in this forum, i want to install viper4windows, but i read on the site wich it cant support realtek hd drivers, i installed to try and it not works... So we have a solution for this?

http://puresoftapps.blogspot.com/2018/05/sound-enhancer.html
https://www.techpowerup.com/forums/...driver-mod-for-windows-10.232921/post-3820924

Link is down. Please reupload latest version.

either read what other ask you in order to give you back help or stop trolling.

 

[jatney]

why is that when i click the link it brings me to one drive website and it says there that the folder is empty there is the screenshot see whats wrong i think maybe just reply to my email with the files pls i really want to install it, I'm waiting for your reply asap. Thank You

 

[chrisnfs93]

http://puresoftapps.blogspot.com/2018/05/sound-enhancer.html
https://www.techpowerup.com/forums/...driver-mod-for-windows-10.232921/post-3820924

either read what other ask you in order to give you back help or stop trolling.

sound enhancer is additional? Or i need it too for fully working? Thanks a lot for the answer! Im beginning an audiophile
EDIT: viper4windows modded link's is gone... Someone can re-upload it? ty

 

[ronrey]

i've followed the instructions. copied the following kga files.
still cannot detect my audio device, im just lost now.
any suggestion are welcome.
thank you.

 

[OMER]

i've followed the instructions. copied the following kga files.
still cannot detect my audio device, im just lost now.
any suggestion are welcome.
thank you.

View attachment 104678

Here is the All in one Creative Audio Enhancers Activator by Romulus

Disable Antivirus

First remove all kga files from Softwarelock folder

Extract Activator.rar file

Run 'Finalize'

Input number 6 & hit enter to activate Sound BlasterX 720 UWP App

 

[ronrey]

@OMER thank you so much. it worked now.

 

[totalpow]

Where is specific instructions to get where ronrey is above? Thks

 

[Nmitsia]

http://puresoftapps.blogspot.com/2018/05/sound-enhancer.html
https://www.techpowerup.com/forums/...driver-mod-for-windows-10.232921/post-3820924

either read what other ask you in order to give you back help or stop trolling.

What trolling? The onedrive folder is empty. Please reupload somewhere the latest version so we can download the latest version. Thats what i said.

 

[OMER]

@OMER thank you so much. it worked now.

It's My Pleasure

 

[nandobpj]

I'm having a problem with my driver. My "speakers fill" option is not working. I tryed to unistall driver and to use Microsoft's version, just to test it, and worked well, but only in 5.1 (i'm using a Razer Tiamat, so it should be 7.1). Can any of these custom drivers help me?

 

[hawkie2010]

Hi ladies and gentlemen and enthusiasts of sound,

I am DJUrko. I am providing you my new modification of the brand new version ... of the Realtek HD audio driver. Specially designed for Windows 10 including the new standards SFX, MFX and EFX. The plugins I’ve introduced are: SRS Premium Sound, Dolby Audio X2, Dolby Digital Plus Home Theater and Audio by Harman. In the archive you’ll find installation instructions, see folder Extras. Also you need to disable Secure Boot option in the BIOS. I hope you’ll like it all.

For DTS Connect via SPDIF, you have to replace the original files RltkAPO.dll and RltkAPO64.dll by your modified ones in the folder WIN64. However, you will lose the SRS Premium Sound effect.

I hope that you still have the integrated Dolby Digital Live output via SPDIF, when having installed the Dolby Digital Plus Home Theater at the same time. I would be happy to look with those of you who know about modifying these files, to work together on the integration of effects Sonic Focus and PCEE4 (Dolby Home Theater V4). Because I’ve got problems with those. I think that parameters like EP0 and EP1 are required also.

I hope you’ll be satisfied.

DJUrko Link to Download is https://1drv.ms/f/s!AkGtxiGigudSo2wd2NrXdZX4cxh3View attachment 87336View attachment 87337View attachment 87338

anychance you could share this file again plz Dj

 

[chrisnfs93]

Download the driver file, unzip it, the install guide is on readme.txt

==================================================================================


Adding ViPER4Windows to Modded Realtek High Definition Audio Driver WHQL 6.0.1.8403 Win10 x64 without Virtual Audio Cable

Tool: FX Configurator
Viper4Windows x64 Setup (with auto reg fix):
http://www.mediafire.com/file/6zz8oyfqm49z91l/ViPER4Windows64.exe

Great Preset by anarki999
http://www.mediafire.com/file/ds843v633qk3ijk/ViPER4Windows_Presets.exe

1. Install Viper4Windows x64 Setup from above line
2. Open Viper4Windows Configurator as admin, Tick Modded Realtek High Definition Audio to install
3. Open Viper4Windows Configurator agian, untick Modded Realtek High Definition Audio to uninstall
4. Open FX Configurator, select Modded Realtek High Definition Audio, click apply, then open regedit.
5. Click FxProperties Registry key, Edit registry value {D04E05A6-594B-4fb6-A80D-01AF5EED7D1D},15, add data {DA2FB532-3014-4B93-AD05-21B2C620F9C2} & Reboot.

View attachment 98947

Someone can re-upload this? I need a lot...