- Joined
- Mar 8, 2018
- Messages
- 350 (0.14/day)
- Location
- U.S.A.
System Name | Dell T3500 |
---|---|
Processor | Xeon X5687 |
Motherboard | Dell - 9KPNV |
Cooling | Dell U016F |
Memory | 12gb ECC 1333 |
Video Card(s) | MSI rx480 gaming X |
Storage | 1tb WD blue |
Case | Dell T3500 |
Bad news friends. No go with these RDIMMs and dual QPI processors in T3500/X58. Not with my small sampling of hardware at least. Same results as with the single QPI W3680. Only get "S8" error at any configuration - one, two, or three modules. BIOS won't even complete POST sequence.
To reiterate, these are the IBM part #49Y1415 8gb 2Rx4 1.35v RDIMM modules.
First tried the W5590. S8 error. (dual QPI = yes)
Then tried X5687. S8 error. (dual QPI = yes)
Put the 6x2gb=12 UDIMMs back in. No issues.
Put the 3x8gb=24 RDIMMs back in the T5500 board. No issues.
So here is where I stand right now with X5687 installed.
> https://valid.x86.fr/c6frgm <
To reiterate, these are the IBM part #49Y1415 8gb 2Rx4 1.35v RDIMM modules.
First tried the W5590. S8 error. (dual QPI = yes)
Then tried X5687. S8 error. (dual QPI = yes)
Put the 6x2gb=12 UDIMMs back in. No issues.
Put the 3x8gb=24 RDIMMs back in the T5500 board. No issues.
So here is where I stand right now with X5687 installed.
> https://valid.x86.fr/c6frgm <
Last edited: