The Ultimate Realtek HD Audio Driver Mod for Windows 10

[OmakeOni]

Man I'm so lost in this thread, I understand nothing of what's going on, only thing I wanted is to be able to have an audio as good as Dobly Atmos, now, can some one explain to me how to do it? I ended up downloading all enhancers from post #788 (if I'm not mistaken) and I just don't know how to install them or which works with which. I don't really need anything amazing, better than my Laptop default is great. The easier the better too. Thanks!

 

[AAF Optimus]

NEW REALTEK DRIVERPACKS RELEASED (FIXED)
UPDATED DRIVER VERSION TO 6.0.1.8631

NEW: DOLBY ATMOS & HARMAN SIMPLE EFFECTS
NEW: DOLBY DIGITAL LIVE & DTS INTERACTIVE

NEW: CREATIVE CHAINING NOT PRESENT

LINK TO DOWNLOAD

GOOD RESORT!!!

 

[ReconNyko]

@Dj Urko It is surround sound upmixer; properly configured it upmixes audio to all channels, including side/rear channels. I use it for upscaling stereo-5.1 on my audio system.
check those settings:
For 5.1

<endpoint type="internal_speaker" brand="Generic" model="Default" operating_mode="normal" fs="48000" total_count="6" front_count="3" side_count="2" height_count="0" has_subwoofer="1">

Also check this:

<surround-decoder-enable value="1"/>

All previous settings such as headphone surround virtualiser, dialog enhancer, volume leveler, graphic equaliser is present in xml.
Only missing is three additional Intelligent Equaliser presets.
I stopped using PCEE4 for audio processing because is has a defect that I cannot personally accept: It cannot handle float audio data properly; audio samples louder than 0dBFS clips with PCEE4. This bug was removed in all later versions of Dolby software.
@ReconNyko All Dolby software does upmixing. PCEE3 and earlier uses Dolby ProLogic. PCEE4 and later versions use Dolby Next Gen surround Decoder. This decoder is the basis for current atmos upmixing on receivers.

Dolby Digital Plus software does not seem to do surround-up mixing.
I heard a 2-channel music file, but I can not hear the center and Rear sound.
I think that surround-up mixing is probably the Dolby Digital Plus codec built into the hardware receiver.

 

[Aleksandar012]

Dolby Digital Plus software does not seem to do surround-up mixing.
I heard a 2-channel music file, but I can not hear the center and Rear sound.
I think that surround-up mixing is probably the Dolby Digital Plus codec built into the hardware receiver.

I had Dolby digital plus and home theather 4 on old gigabyte board,and they arent good for stereo to 5.1 upmixing.

I post driver on this page with controled prologic IIx were you can fade dimension from front to rear and hear voices also.Natural bass is realy good bass crossover.

https://www.techpowerup.com/forums/...ital-live-dts-interactive.228612/post-3994662

 

[CityCultivator]

Dolby Digital Plus software does not seem to do surround-up mixing.
I heard a 2-channel music file, but I can not hear the center and Rear sound.
I think that surround-up mixing is probably the Dolby Digital Plus codec built into the hardware receiver.

I am using right now DDP app to do upmixing of 2 channel music to 5.1.
Check your config. DDP must be the first or only APO that audio passes through.
Reference Page 8 explains the decoder.

 

[Metal-Tom]

There's a Thing, what's interesting me a Lot: Isn't it possible to integrate Versions of some APO's for handling & Upmixing (into) 7.1-Ch-Surround, by Example DPLIIx/z, or DTS Neo:6 or Logic7, or even other? I wish 2 hear it soon

 

[AAF Optimus]

Coming Soon: DTS Headphone X Custom....

 

[dpg]

Coming Soon: DTS Headphone X Custom....
View attachment 116441

Thank you,can you add DAtmos,DolbyIIz or x

 

[AAF Optimus]

Thank you,can you add DAtmos,DolbyIIz or x

Dolby ATMOS already present.

 

[dpg]

Thank you,You are better than OEM.
when can I try it.

 

[Metal-Tom]

Thank you,can you add DAtmos,DolbyIIz or x

I wish Dolby ProLogic IIx/z & DTS:X for Speakers

 

[alanfox2000]

I have not try this tool yet
Multi-Channel EQ Simulator + DRC
https://drop.me/M7wjDe
save dat file to C:\Windows\System32\drivers. reboot

 

[OMER]

I have not try this tool yet
Multi-Channel EQ Simulator + DRC
https://drop.me/M7wjDe
save dat file to C:\Windows\System32\drivers. reboot
View attachment 116446
View attachment 116447

Unable to download file, drop.me error

 

[Metal-Tom]

Unable to download file, drop.me error

I'd even downloaded the File, early in the Morning...

 

[David V.]

I do not know if it is my pc but when I install it all the effects work but the audio is heard noisy and as distorted, it will be my PC problem or is it something wrong to install it?

 

[Le_Rane]

NEW REALTEK DRIVERPACKS RELEASED (FIXED)
UPDATED DRIVER VERSION TO 6.0.1.8631

NEW: DOLBY ATMOS & HARMAN SIMPLE EFFECTS
NEW: DOLBY DIGITAL LIVE & DTS INTERACTIVE

NEW: CREATIVE CHAINING NOT PRESENT

LINK TO DOWNLOAD

GOOD RESORT!!!

Sup Alan. Need some help with ur pack here) last 2 versions didn't work for me as well. I did clean install but after reboot, always happened smth and my sound didn't work at all
Get some screenshoots and didn't know what to do, but tried everything. Please help me

Spoiler: Screens

 

[MerolaC]

@Alan Finote
Thank you so much for these!

I do not know if it is my pc but when I install it all the effects work but the audio is heard noisy and as distorted, it will be my PC problem or is it something wrong to install it?

I have the exact same problem.
What I did to workaround it for now was to go into Sound Devices, Properties on Speakers and "Enhancements" tab, select Disable all sound Effects.
Dolby Home Theater do not work, but Dolby Home Theater v4 does work, same for Harman Effects.

I wanted the drivers anyway for Dolby 5.1 and DTS 5.1 over Optical.

My Motherboard is a ASUS Maximus VIII Ranger

 

[JoshMlvn]

Thank You @Dj Urko for your work
Finally I can figure it out how to install this mod. Everything is works fine.

 

[Juggler]

NEW REALTEK DRIVERPACKS RELEASED (FIXED)
UPDATED DRIVER VERSION TO 6.0.1.8631

NEW: DOLBY ATMOS & HARMAN SIMPLE EFFECTS
NEW: DOLBY DIGITAL LIVE & DTS INTERACTIVE

NEW: CREATIVE CHAINING NOT PRESENT

LINK TO DOWNLOAD

GOOD RESORT!!!

Hi, I have just tried this but no effects are coming out. Creative says "Your audio device cannot be detected. Please check your connection". Am I supposed to see a Creative device in Device Manager? All I need really is the Enhancements tab in the Realtek HD Audio Control Panel. I have been trying for around 2 months and installed about 15 versions of the drivers, with no success. The closest results I got were with the old drivers prior to version 2.82. My system is a Microsoft Surface Pro 6.

 

[AAF Optimus]

NEW DRIVER IN THIS POST!
GOOD RESORT!

Am I supposed to see a Creative device in Device Manager?

No. Because Creative effect libraries are integrated into the Realtek driver.

 

[Passoca]

Can anyone help me, I install the drivers but the modifications go to the realtek digital output, I use only the high-missing realtek

 

[Juggler]

NEW DRIVER IN THIS POST!
GOOD RESORT!


No. Because Creative effect libraries are integrated into the Realtek driver.

Then that's a problem less Any idea why Creative is not detecting my audio device?

 

[AAF Optimus]

Then that's a problem less Any idea why Creative is not detecting my audio device?

View attachment 116575

Friend. Please check this directory: "%programdata%\Creative\SoftwareLock" for the KGA files

Can anyone help me, I install the drivers but the modifications go to the realtek digital output, I use only the high-missing realtek

Did you uninstall the previous drivers on your system?

 

[Juggler]

Friend. Please check this directory: "%programdata%\Creative\SoftwareLock" for the KGA files


Did you uninstall the previous drivers on your system?

I started with a fresh install and yes the SoftwareLock folder is full of kga files of 1k each. In v2 of your drivers I now have a new tab in the Realtek HD Control Panel. There are presets and they're good. What I am really missing is a graphic equalizer.

I just noticed something else and I thought of letting you know. In the presets window you have a slight masking of the background. See screenshot here.

 

[Stakanov]

I do not know if it is my pc but when I install it all the effects work but the audio is heard noisy and as distorted, it will be my PC problem or is it something wrong to install it?

@Alan Finote
Thank you so much for these!
I have the exact same problem.
What I did to workaround it for now was to go into Sound Devices, Properties on Speakers and "Enhancements" tab, select Disable all sound Effects.
Dolby Home Theater do not work, but Dolby Home Theater v4 does work, same for Harman Effects.
I wanted the drivers anyway for Dolby 5.1 and DTS 5.1 over Optical.
My Motherboard is a ASUS Maximus VIII Ranger

I have the exact same problem, the audio is heard noisy and as distorted … Dolby Digital Plus do not work, but Dolby Home Theater v4 does work, same for Harman Effects is heard noisy and distorted. I disable all effect!!!!!

I wanted the drivers anyway for together Dolby 5.1 and DTS 5.1 …. I only use Optical s/pdif and my external receiver is Pioneer VSX-922K.

The last original AUDIO_Realtek_HDA_FF03_v6.0.1.8633_WHQL (asus=ff03 nahimic) is very good for normal stereo signal on Asus … it is possibile activate the Dolby 5.1 and DTS 5.1 in this driver???
This is the link: https://github.com/alanfox2000/real...F10_PG470_Win10_RS2_RS3_RS4_RS5_Win7_WHQL.rar
My Motherboard is a ASUS Maximus VII Hero (ALC1150) …. thanks in advance!!!!