Which will not be a problem as all Ryzen 3 CPU's will be on 7nm and using LESS power per core. So if a board is design for an 8 core Ryzen 1 or 2, an 8 core Ryzen 3 will safely and perfectly run on the same board and because of the power savings, a 10 or 12 core model will very likely run just as safely.
I think you should talk with people more and spend less time building PCs.
Ask those who bought 8-core Ryzen system, with plans to upgrade later, if "10 or 12 core will
likely run" is what they were expecting.
AMD knows what they're doing
It's your opinion.
as long as motherboard makers have complied with AMD's specifications, which they would have had to run the first and second gen CPU's, then Ryzen 3 will run perfectly with a firmware update.
So give me 1 reason why it's not official yet.
Why aren't all companies, AMD included, saying: of course you'll be able to run Zen2 on your x370.
Why is AMD silent?
Why is MSI "testing potential compatibility"?
Pointless posturing. All AM4 chipsets are electrically compatible with all Ryzen CPU's until AMD announces a change, which they haven't and have already said they won't for the next couple years. Boards based on them are required to support Ryzen 3(Zen2) at minimum.
Yeah. We'll see in few months. Someone will have a laugh, that's for sure.
[/QUOTE]
9900k isn't a 95W TDP processor outside it's base clocks, just so you know.
Of course it isn't. But it works on every board with a chipset that supports 9th gen.
This is what we're discussing here, right? Many people believed Ryzen 3000 will work on the AM4 motherboard they bought in 2017.
Did you see the link, also EPYC reveal sometime earlier? AMD discussed the process characteritics of TSMC 7nmm, it should be clear enough based on AT's power estimates that zen2 (7nm TSMC) will be nearly 2x as effcient as Zen on GF 14nm if not better.
Not possible. It makes no sense physically for an architecture to use half the power because it takes half the space. It wouldn't converge properly.
Well, unless we agree that Zen on GF 14nm was rubbish and there was a lot of place for improvement on it. And I really don't that was the case.