• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Throttlestop overclocking Desktop PCs

Joined
Sep 20, 2019
Messages
527 (0.28/day)
Processor i9-9900K @ 5.1GHz (H2O Cooled)
Motherboard Gigabyte Z390 Aorus Master
Cooling CPU = EK Velocity / GPU = EK Vector
Memory 32GB - G-Skill Trident Z RGB @ 3200MHz
Video Card(s) AMD RX 6900 XT (H2O Cooled)
Storage Samsung 860 EVO - 970 EVO - 870 QVO
Display(s) Samsung QN90A 50" 4K TV & LG 20" 1600x900
Case Lian Li O11-D
Audio Device(s) Presonus Studio 192
Power Supply Seasonic Prime Ultra Titanium 850W
Mouse Logitech MX Anywhere 2S
Keyboard Matias RGB Backlit Keyboard
Software Windows 10 & macOS (Hackintosh)
to clarify, I game on Windows 10, which is running on my Apple Mac Pro. I dual boot macOS and Windows. but yes you are correct, I have stock clocks on my Xeons. It is Apple hardware I think that makes it rather troublesome to overclock (or alter in any way really), no way to get into anything similar to a BIOS setup. otherwise the CPUs are the same, the CPUs I have are the same that would go into any PC using a chipset that could take the CPU. so I'd say its not that the CPUs are locked, its the ecosystem they are installed in that is effectively locking them. The only difference is my dual CPU system requires them to be delidded where the single CPU system keeps the IHS on. I read up on overclocking these guys many years ago but it became too convoluted for me to really follow through with it. Perhaps if I revisit it now-a-days with the knowledge I've gained over the years, perhaps it wont sound so "greek" to me anymore lol. These CPUs are very competetive multi core wise, but single core they are showing their age. I do wish I could easily overclock them like on a PC system
 

dhrag5t

New Member
Joined
Oct 16, 2019
Messages
14 (0.01/day)
These CPUs are very competetive multi core wise, but single core they are showing their age.

On stock, yes, the single core performance isn't that great anymore. But an overclock to 4.2+ GHz can definitely breathe new life into it. I managed to get mine to about 4.4/4.5 on a single core with Throttlestop and the single thread Passmark benchmark results beats a Ryzen 5 1600, which is one of the most lauded mid-range CPU's in the tech community. Unfortunately not many people know about Throttlestop - even I was stuck at stock speeds on an OEM board until a few weeks ago when I discovered this forum. With the right overclock, X58 chips are still very relevant in 2019.
 
Joined
Jan 11, 2018
Messages
309 (0.12/day)
Location
HSV and SFO
1. I do. You need to understand the weight of it... read some benchmarks.
2. Yeah, if the machine is a internet and wp box, a potato would run it. Clearly we arent talking about that..seriously.
3.
Please read up on it. I dont have the time to web search the details. But you have a knowledge gap here.

It isnt ludacris at all.. again, please go find some benchmarks... there is a glass ceiling when using older cpus to game at 1080p or less. The cpu has less work to do at a higher res. Apologies I cant link...I'm mobile...so you'll have to go look for yourself.

Something is better than nothing...obviously, but that isnt the point here.

No perfect benchmarks, I agree. Some are farther from perfect than others. Pass mark isnt generally held as a good one from those in the know, however. ;)

Can we stop now please? We obviously disagree about some things here and it won't be resolved. You dont want look up benches and I dont have the time.njust know that thise old cpus while they will work will be notably slower than modern cpus and hold back gaming at 1080p. I also feel like I'm throwing shade on these cpus for little reason but to prove my points to a random user. Cheers. :)
I think you have invested a little too much in benchmarks. Benchmarks don't change the tech or how things actually work. They do, however, attempt to reveal how changes affect performance, and even then the results are still interpreted.

I don't think I have a knowledge gap anywhere when it comes to computers. I've been in it far too long, almost from the beginning, and have seen changes in hardware that the last 10 years can't shine a candle to. And at the end of the day, the fundamentals are still there--the instruction set, the cpu and it's paths to the rest of the system, and of course the sub-systems like memory and video that have evolved with innovations in engineering.

Someone above just posted that they can game at well over 1080p, so I don't know where you're getting this '<1080p' thing from. Unless there's a technical flaw in the architecture, which wouldn't surprise me as there's been hiccups along the way to get us to where we are today, there is no logical or hardware reason for your statement to be true.

For me, that is the point. The reason gaming exists today is because the price point came down. If you had to build the $10k+ machines I was running quake on (when they weren't doing real work), pc gaming would still be a niche dominated by those of us that remember it being a niche and not mainstream. And it still is an expensive hobby because these machines are more expensive than consoles by far, and yet the low-end is accessible to those who otherwise wouldn't be able to. Telling everybody that you need to spend more and buy faster is just a waste of money, especially is one doesn't have it. Recently, I'm see so many people parting out rigs because they can't afford what they bought--no gaming for them anymore. It's like telling every new driver they need to have a Ferrari to corner hard when a Miata does that quite well with stellar value.

In the know? Who is 'in the know' versus everyone else that reads benchmarks? This is starting to just sound like some sort of millennial gamer elitist mantra.

I think you nailed it on the head that you're 'throwing shade on these cpus for little reason but to prove my points to a random user.' You're not going to 'skool me' on this because I know far more than you do about the fundamentals of machine architecture, and there's several actual, real-world examples of machines that are what I would call pretty decent at the task and an excellent value doing what they can for so little invested.
 
Joined
May 13, 2018
Messages
225 (0.09/day)
System Name Terminator T3500
Processor Intel Xeon W3680 4GHz
Motherboard Dell T3500
Cooling Deepcool Gammax 400
Memory 12GB (6x2GB) DDR3 1333
Video Card(s) PowerColor Red Dragon RX 580 8GB
Storage 120GB SSD + 1TB HDD
Display(s) Acer H233H - 1920x1080 75Hz
Case Corsair Carbide Spec-01
Audio Device(s) Kinter MA-170
Power Supply Corsair CX600
Mouse Corsair Katar
Keyboard Ajazz AK33
Software Windows 10
I still love my POS X58 system...I spent about $300 all in, a few years ago now...and haven't really done much with it since then. Still lets me play any game I want...I've been itching to upgrade only just now because I live with roomates, and the thing is loud because of all the heat from the 290X and CPU. I don't care about upgrading performance much...I've been planning on a W3680 for forever, just haven't really cared. My monitor is 75Hz 1080P, most games do that with ease. I don't know, I get 110-130 FPS in Quake Champions, the only online game I really play, and I don't get wrecked. I do just fine. With my $300 computer that is now worth half that...and a $30 monitor, $20 mech keyboard, $20 studio monitors, $10 aio cooler...I'm a cheapskate. The only things I bought new were the PSU and Corsair Katar/QCK+. Also...all prices I mentioned are Canadian...so it would be significantly less in USD. Also, my cheap computer leaves me more money for other things I probably wouldn't have, like 15+ games consoles and decent game collection...basically more computers...nevermind.
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
For anyone who is interested there are several videos posted throughout this thread comparing overclocked X58 to newer CPUs with modern games used as examples. They're not specifically TS unlocked CPU systems, so results will vary somewhat, but the testing is done at several resolutions and you can decide for yourself if this is for you.
When I was answering Dell questions at Tomshardware there were a lot of people who needed an inexpensive computing solution that wouldn't limit them too much on what they could use it for. Young people, engineering students, people with a family to support, small business owners, a 2nd computer for the kids to use. The Dell T3500 X58 workstation still checks off a lot of boxes for a lot of people. 6C/12T, 48GB RAM, ECC support if needed, PS2 mouse support, RAID BIOS, a very simple 4GHz overclocking process, <$100 price. At that price point I doubt if 4K monitors are in the budget, or the GPU to run them. But they could be added later.
 
Joined
Sep 28, 2005
Messages
3,327 (0.48/day)
Location
Canada
System Name PCGR
Processor 12400f
Motherboard Asus ROG STRIX B660-I
Cooling Stock Intel Cooler
Memory 2x16GB DDR5 5600 Corsair
Video Card(s) Dell RTX 3080
Storage 1x 512GB Mmoment PCIe 3 NVME 1x 2TB Corsair S70
Display(s) LG 32" 1440p
Case Phanteks Evolve itx
Audio Device(s) Onboard
Power Supply 750W Cooler Master sfx
Software Windows 11
Wait, is it official that ECC memory memory works on these T-3500's?
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
Last edited:
Joined
Sep 28, 2005
Messages
3,327 (0.48/day)
Location
Canada
System Name PCGR
Processor 12400f
Motherboard Asus ROG STRIX B660-I
Cooling Stock Intel Cooler
Memory 2x16GB DDR5 5600 Corsair
Video Card(s) Dell RTX 3080
Storage 1x 512GB Mmoment PCIe 3 NVME 1x 2TB Corsair S70
Display(s) LG 32" 1440p
Case Phanteks Evolve itx
Audio Device(s) Onboard
Power Supply 750W Cooler Master sfx
Software Windows 11
I wanna get 32gb of 1600 ram for my t3500 but they are pricy atm.
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
I wanna get 32gb of 1600 ram for my t3500 but they are pricy atm.
3 channel RAM and 32GB does not compute. 30GB (3x8,and 3x2) or 36GB (3x8 and 3x4) makes more sense. They will run at 1333 speed. ECC will add some latency also. 6x4GB 1333 ECC would probably be the most cost effective solution.
 
Joined
Sep 28, 2005
Messages
3,327 (0.48/day)
Location
Canada
System Name PCGR
Processor 12400f
Motherboard Asus ROG STRIX B660-I
Cooling Stock Intel Cooler
Memory 2x16GB DDR5 5600 Corsair
Video Card(s) Dell RTX 3080
Storage 1x 512GB Mmoment PCIe 3 NVME 1x 2TB Corsair S70
Display(s) LG 32" 1440p
Case Phanteks Evolve itx
Audio Device(s) Onboard
Power Supply 750W Cooler Master sfx
Software Windows 11
3 channel RAM and 32GB does not compute. 30GB (3x8,and 3x2) or 36GB (3x8 and 3x4) makes more sense. They will run at 1333 speed. ECC will add some latency also. 6x4GB 1333 ECC would probably be the most cost effective solution.

Darn your right. 36

Fat fingers on phone don't work
 

dhrag5t

New Member
Joined
Oct 16, 2019
Messages
14 (0.01/day)
At that price point I doubt if 4K monitors are in the budget, or the GPU to run them. But they could be added later.

4K panels are pretty affordable now too. For around $200 you could pick up a 40-43 inch TV from Walmart. Great picture and the input lag isn't that bad either. The end of the mining craze has also resulted in a lot of cheap GPU's flooding the used market - something like a RX 580 can be found for around $100 - $120 and can run titles at 4k 30fps on medium-high settings with AA off (you don't really need it at that resolution anyways). It's a great time to be a budget PC gamer.

I wanna get 32gb of 1600 ram for my t3500 but they are pricy atm.

Check the used market. FB marketplace, craigslist, letgo/offerup etc. A lot of gamers are upgrading to new Ryzen systems and usually will part out their old systems, so you can usually find them letting go of their older DDR3 for really cheap. I replaced a bunch of assorted 2GB and 4GB Samsung and Hynix sticks on my T3500 with 3x8GB Corsair sticks bought used off Facebook from a guy parting out his Ivy Bridge gaming rig.

The better RAM has allowed me to get a very stable 4.26 Ghz overclock, compared with 4.13 Ghz with the mix and match RAM sticks I was running before. Small difference, but it's nice knowing you've squeezed everything you can out of an aging but still capable x58 platform.
 
Joined
Mar 8, 2018
Messages
350 (0.14/day)
Location
U.S.A.
System Name Dell T3500
Processor Xeon X5687
Motherboard Dell - 9KPNV
Cooling Dell U016F
Memory 12gb ECC 1333
Video Card(s) MSI rx480 gaming X
Storage 1tb WD blue
Case Dell T3500
Wait, is it official that ECC memory memory works on these T-3500's?
Yes and no. Only unregistered (non-buffered) ECC modules or non-ECC ("regular") for the T3500 as per the Dell owner's manual, and my own personal testing.

Now, if you want to use registered ECC (buffered) modules which are far less expensive the T5500 with it's Intel 5520 chipset (instead of X58) is your choice. However, those require two QPI processors even in single CPU operation. None of which are known to be unlocked. So no overclocking with TS in T5500 unfortunately. All of this I have confirmed by testing in my own systems.
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
8GHz Dell T3500 X5675 Xeon @ CPUZ. YES THIS IS TOTALLY BOGUS!!! The benchmark score is unremarkable.
But it's nice that the bad guys took on a Dell overclock project!
 
Joined
Oct 25, 2018
Messages
278 (0.12/day)
Man, I think I'll be getting a T3500 next payday.....time to hit up ebay

Anybody had success with throttle stop with HP Z400's or Z420's with 2600's series Cpu's?
 
Joined
Mar 8, 2018
Messages
350 (0.14/day)
Location
U.S.A.
System Name Dell T3500
Processor Xeon X5687
Motherboard Dell - 9KPNV
Cooling Dell U016F
Memory 12gb ECC 1333
Video Card(s) MSI rx480 gaming X
Storage 1tb WD blue
Case Dell T3500
Man, I think I'll be getting a T3500 next payday.....time to hit up ebay.
T3500 are a great buy right now. I have kept an eye on pricing. 3 to 3.5 years ago a complete box could be had for $60 delivered (location dependent). Then it became widely known T3500 can be used for a gaming rig and prices approached $200. Complete boxes are back down below $80 delivered again.

Use the older low end processor they usually come with. Install an SSD, decent GPU, and Win10. Then update to latest BIOS *and* Intel chipset driver (if not already) so it's compatible with 32nm Westmeres. Now install some inexpensive used 2gb RAM modules, and $40 W3680 CPU. Easy 4.0ghz with TS. You're set. Total should be $500-$600.

Not going to keep pace with modern systems in benchmarks, obviously. Do we play benchmarks? No. Like RetroRockit said a few posts back. The difference between 200fps and 130fps is imperceivable. A lot to be said for 'good enough'. If you run into any roadblocks there are plenty of great people here and the Dell Workstation club thread to help you out.
 
Last edited:

dhrag5t

New Member
Joined
Oct 16, 2019
Messages
14 (0.01/day)
Man, I think I'll be getting a T3500 next payday.....time to hit up ebay

Anybody had success with throttle stop with HP Z400's or Z420's with 2600's series Cpu's?

Before buying a T3500 and upgrading all the components, I'd look around the local used market for people selling their old x58 systems. The T3500 is fine but the locked motherboard will limit your overclock to 4 or 4.1 Ghz, compared with an unlocked motherboard that would allow you to change voltages to get to to 4.5 or even 4.6 Ghz if you get lucky. You'd also be able to overclock the RAM, and some x58 boards also allow you to boot from NVMe drives (AFAIK you can't do this on a T3500).
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
The Z400 is OK. It's an ATX layout too so case swapping becomes possible. You will want the newer 6 RAM slot board, not the early 4 slot version. A little PSU wiring mod is needed for a PSU swap. HP stayed with a 4 pin CPU connector and added a couple 12V. lines to the MB 24 pin plug. TS works through Windows. With an unlocked CPU it can raise Voltage, and multiplier.

If you can find a deal on an unlocked X58 system that would be good. But last time I looked decent unlocked X58 bare MB were going for $150. There have been whole overclocked T3500 systems built for less than that ( minus GPU ).
Aaron_Henderson did a Z400 in this, and/or the Dell workstation Owners thread.
As far as the Z420 goes it has it's fans as a gaming rig.
You can look here for newer unlocked Xeons to try. None of the 2 CPU versions will be unlocked.
 
Joined
Mar 8, 2018
Messages
350 (0.14/day)
Location
U.S.A.
System Name Dell T3500
Processor Xeon X5687
Motherboard Dell - 9KPNV
Cooling Dell U016F
Memory 12gb ECC 1333
Video Card(s) MSI rx480 gaming X
Storage 1tb WD blue
Case Dell T3500
Nope. Cannot do any of that on the T3500. Too bad since bare boards go for about $40. A good X58 board would be nice. In three years I have not been able to find any deals that jumped out at me. Keeping an eye on the X58 overclocking threads the ASUS Sabertooth seem to be a popular mid-level board at about $130 current pricing. Upper end enthusiast boards like the EVGA classified and ASUS Rampage 3, among others, are going to cost $250.-$300.
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
Even the slightly unlocked Dell/Alienware MB bring about $100. They're made by MSI and I don't think they OC any better than the workstation. Last T3500 I bought was in a bundle with 3 other computers. Paid $80 for the 4 of them. To do BCLK overclocking you will also need 1600,or 2000 speed DDR3. The 1333 ECC DDR3 these run isn't so popular anymore. Susquehannock rescues his from the dumpster.
But it's definitely not the same thing. Cheaper, simpler to do, and possibly more reliable due to stressing the subsystems less. Basically, overclocking locked BIOS computers is pretty much a separate hobby form normal overclocking. If you already have the good X58 stuff, and the experience to use it, there's not much reason to switch to this. But if some Dell or HP 1 CPUworkstation lands in your lap there's some pretty good potential there.
 
Joined
Nov 6, 2018
Messages
174 (0.08/day)
Before buying a T3500 and upgrading all the components, I'd look around the local used market for people selling their old x58 systems. The T3500 is fine but the locked motherboard will limit your overclock to 4 or 4.1 Ghz, compared with an unlocked motherboard that would allow you to change voltages to get to to 4.5 or even 4.6 Ghz if you get lucky. You'd also be able to overclock the RAM, and some x58 boards also allow you to boot from NVMe drives (AFAIK you can't do this on a T3500).

I boot windows from NVME Solid State drive on Dell Precision T3500.


3.JPG2.JPG1.JPG


But if I had budget I would buy Ryzen 3950X system.

However in terms of Cost to Performance Ratio, Dell Precision T3500 is still very much relevant.
 
Last edited:

dhrag5t

New Member
Joined
Oct 16, 2019
Messages
14 (0.01/day)
I boot windows from NVME Solid State drive on Dell Precision T3500.


View attachment 134991View attachment 134992View attachment 134993


But if I had budget I would buy Ryzen 3950 system.

However in terms of Cost to Performance Ratio, Dell Precision T3500 is still very much relevant.

Wow, I did not know that was possible. That’s actually great news as I was looking at upgrading the HDD on my T3500 to an SSD.

Could you describe the process and parts required for this? Or a link to a previous discussion on this.
 
Joined
Nov 6, 2018
Messages
174 (0.08/day)
Wow, I did not know that was possible. That’s actually great news as I was looking at upgrading the HDD on my T3500 to an SSD.

Could you describe the process and parts required for this? Or a link to a previous discussion on this.


read page one and then from around page 20 as the info you need is on page one but it was updated at around the same time that the posts between about pages 17 - 23 were made so some of page one post dates quite a lot of what appears to come after it.

ALL OF THE BELOW ASSUMES YOU KNOW HOW TO START AND USE THE COMMAND PROMPT!

• 1) Open the Windows Command Prompt with "Run as Administrator" option at the same location you unpacked the DUET to (obviously).

• 2) CD into the DUET_UDK2017_REFIND folder if you haven't already.
EXAMPLE: "cd C:\DUET_UDK2017_REFIND" (without quotes). Enter.

• 3) Note down the drive letter of the USB flash drive.

• 4) Type "CreateUSB Drive_Letter: FORMAT" (without quotes).
Example: "CreateUSB.cmd K: FORMAT" (without quotes) - (K: is the drive letter of the USB flash drive.)
This command will format the selected USB flash drive and set up the MBR boot code and the Boot Sector necessary to boot DUET.

• 5) Safely Remove and Replug the USB flash drive. (crucial).

• 6) Type "CreateUSB Drive_Letter: DUET" (without quotes).
Example: "CreateUSB K: DUET" (without quotes).

• 7) OPTIONAL: REFIND BOOT MANAGER: (this is needed to "easily" boot the Windows installer)
Type "CreateUSB Drive_Letter: REFIND" (without quotes).
Example: "CreateUSB K: REFIND" (without quotes. This will copy all the REFIND files to the USB in order to have a GUI that can boot things, such as Windows).

• 8) Once done remove the USB flash drive.

• 9) Plug in the USB flash drive on the target system and set "Boot from USB" as the first option in your system's BIOS Boot order option.

Note: The Pcie NVME Adapter donot work in every pcie slot, you need to try one by one to see in which slot it is being recoganised



Note: You will have to do fresh install of Windows (or any other Operating System) on NVME SSD.


PS: After PCIE NVME Drive if you also add a PCIE USB3 adapter, Your Dell Precision T3500 becomes at par with any modern system.

Good thing about T3500 Motherboard is that it has many PCIE Slots.

 
Last edited:
Joined
Mar 8, 2018
Messages
350 (0.14/day)
Location
U.S.A.
System Name Dell T3500
Processor Xeon X5687
Motherboard Dell - 9KPNV
Cooling Dell U016F
Memory 12gb ECC 1333
Video Card(s) MSI rx480 gaming X
Storage 1tb WD blue
Case Dell T3500
Even the slightly unlocked Dell/Alienware MB bring about $100. They're made by MSI and I don't think they OC any better than the workstation. Last T3500 I bought was in a bundle with 3 other computers. Paid $80 for the 4 of them. To do BCLK overclocking you will also need 1600,or 2000 speed DDR3. The 1333 ECC DDR3 these run isn't so popular anymore. Susquehannock rescues his from the dumpster.
That is true about 1333 modules. Watching pricing the 1600mhz modules seem to be more common and often less expensive. Might be a good option for those who want to BLCK. One thing to watch for buying cheaper T3500 boxes is the older ones came with 1066mhz modules.

Another big thing that I said before which bears mentioning for those new to the discussion is stay away from 'N series' boxes for networks. Often priced to sell. As I understand Dell had to "windows cripple" non-windows bundled machines due to Microsoft licensing agreements. No personal experience, but Windows on T3500 N series is certainly doable. Just not easy. One way is to change the motherboard. Another is change the service tag then do a factory reset on the BIOS. This page explains the procedure.

I do get my T3500 free. Not from dumpster really. Friend at a CAD design firm diverts warranty expired hardware to me instead of the recycler. Larger companies update at end of warranty period as matter of course and cannot be bothered with trying to re-purpose or re sell. I was recently given a set of Dell/Toshiba enterprise level 4tb drives that are perfectly fine except for having a little over three year use. Would imagine recycling companies make some decent money selling things like this.
 
Joined
Jan 19, 2016
Messages
1,086 (0.34/day)
Location
South Florida
System Name BTXTREME
Processor QX6800 SLACP Core2 Extreme
Motherboard Dell 0WG864 LGA775 BTX
Cooling Dell T9303 heatpipe cooler, Delta GFB1212VHG 2 motor fan.
Memory 8GB Dell DDR2@800
Video Card(s) Sapphire Dual BIOS R9-285 ITX O/C 2GB DDR5
Storage Crucial M500 240GB SSD
Display(s) Dell 22" LCD
Case Dell Dimension E 520 MT
Audio Device(s) onboard sound with Logitech Z523 speakers
Power Supply EVGA B2 750W semi modular
Mouse Logitech wireless (two installed)
Keyboard Logitech wireless backlit
Software Win7-64, Throttlestop 6.00 overclock
Benchmark Scores 3DMark 11 P7644 (52% )In Win7 64, Firestrike 6892 ( 58% ) http://valid.x86.fr/l2j5p1
I came across this tidbit at OCN X58 Xeon Club.
"i7 980, 980x,990x and their counterparts W3670, 3680 and 3690 have "open" ram dividers too, you can go up to 1:18, westmere xeons are stuck to 1:10, the X5679 even to 1:8"

Since Throttlestop was originally intended for laptop undervolting maybe it's missing a setting that would allow faster RAM timings. This would help even things up compared to the BCLK method if it's true. I suppose the "easiest" way to test this would be a TS overclock on a an unlocked MB and see what the RAM settings can do at the stock BCLK speed.

I have no experience with RAM timings, so I'm not sure what 1:18 multiplier equals in RAM speed at the standard BCLK of 133. But 18x133= 2394 which looks like a modern DDR3 spec to me.
Also ASFIK W3670 isn't an unlocked multiplier CPU, so would not be useful for TS overcloking anyway.
 
Last edited:
Joined
May 25, 2019
Messages
8 (0.00/day)
System Name NAS / HTPC
Processor Xeon W3680 @ 3.9Ghz
Motherboard Dell 0X501H (BIOS based and not EFI capable)
Cooling Scythe Ninja 4, 6 AFB1212L, 2 120mm VRM fans (1 top, 1 bottom of board), Sunbeam Rheostat Extreme
Memory 30GB DDR3 1066MHz CL7 (3x8GB, 3x2GB)
Video Card(s) EVGA GTX 1060 6GB P4-6161-KR
Storage ZFS root, ZFS mirror (media), ZFS JBOD (gaming, etc.)
Display(s) Panasonic X3 Plasma TV
Case Caselabs BH8 (white, vented top)
Audio Device(s) Creative Sound BlasterX G1 USB sound card, H5 cans, Philips 5.1 home theater
Power Supply Seasonic SS850HT
Mouse Itac mouse-trak Industrial Trackball, Logitech M310
Keyboard Logitech K520, CM Storm Cherry Red Mechanical
Software Antergos Linux XFCE (Antergos repos removed)
I came across this tidbit at OCN X58 Xeon Club.
"i7 980, 980x,990x and their counterparts W3670, 3680 and 3690 have "open" ram dividers too, you can go up to 1:18, westmere xeons are stuck to 1:10, the X5679 even to 1:8"

Since Throttlestop was originally intended for laptop undervolting maybe it's missing a setting that would allow faster RAM timings. This would help even things up compared to the BCLK method if it's true. I suppose the "easiest" way to test this would be a TS overclock on a an unlocked MB and see what the RAM settings can do at the stock BCLK speed.

I have no experience with RAM timings, so I'm not sure what 1:18 multiplier equals in RAM speed at the standard BCLK of 133. But 18x133= 2394 which looks like a modern DDR3 spec to me.
Also ASFIK W3670 isn't an unlocked multiplier CPU, so would not be useful for TS overcloking anyway.
Interesting. No experience in RAM dividers either, unfortunately, but I'm curious what potential there is with an open divider.

On the topic of RAM, I want to throw it out there that (apparently) adding RAM can increase boot time. My board now gets stuck on post for 60sec or so. Doesn't bother me, but boot time is important to some people, so I figured I'd mention it.

@unclewebb, is it possible to turn off speedstep/power savings with MSR or does Throttlestop accomplish it via a reg key in Windows? I looked through the Intel MSR doc, but couldn't find anything helpful. I'd like to stop the CPU from downclocking (some games run smoother this way) but have no speedstep option in the BIOS.
 
Last edited:
Top