TPU's WCG/BOINC Team

Lorec · May 9, 2020

phill said:
I set it to 3150MHz in the Ryzen master software and 0.875vcore, temps regularly hit 75C to 85C crunching and doesn't seem to matter so I'm guessing it's still possibly controlled by the bios more so.. I'm not so sure...

View attachment 154357

I guess I need some more tweaking to see what I can and can't do with this CPU..... It for me is too high on the temps....

Just tried it again with out my profile set on it, straight to 84C....

View attachment 154366

Obviously boosting over 4GHz but was dropping I think to try and get the CPU temp under wraps.... I think I'm going to have to have a delve into the bios and see what I can do If I can find the 65w profile that @thebluebumblebee mentioned, I'll give it a go

74C is high, but then again Your 3900x is on air,right?

ECO mode is in ryzen master. Once You set PBO on ENABLED You can choose it in software itself.
Doesnt seem to change anything for me.

Idk why does it even work this way.
I have PBO off and Core Performance Boost on Auto.
Everything else in my bios is pretty much stock right now.
Voltages etc on auto.
99% lets it upto 3.4Ghz@0.938V, while 100% lets it go till ~4.3@1.3-1.4V (basic AMD Ryzen Balanced plan)

EDIT:
Been playing around and how about turn PBO and CPB off altogether?
@phill You will run at base speed 3.8Ghz, stock voltage and see where it gets You.
No need for power plans and other shenanigans

I might survive this summer after all!

thebluebumblebee · May 9, 2020

Meanwhile, it's snowing in parts of the NE in MAY! We're headed for 85+ and my sister is sending me pictures of snow on the ground from the Watkins Glen area. Crazy!

mstenholm · May 9, 2020

thebluebumblebee said:
Meanwhile, it's snowing in parts of the NE in MAY! We're headed for 85+ and my sister is sending me pictures of snow on the ground from the Watkins Glen area. Crazy!

Overnight ship your rigs to your sister

.

phill · May 9, 2020

Lorec said:
74C is high, but then again Your 3900x is on air,right?

ECO mode is in ryzen master. Once You set PBO on ENABLED You can choose it in software itself.
Doesnt seem to change anything for me.

Idk why does it even work this way.
I have PBO off and Core Performance Boost on Auto.
Everything else in my bios is pretty much stock right now.
Voltages etc on auto.
99% lets it upto 3.4Ghz@0.938V, while 100% lets it go till ~4.3@1.3-1.4V (basic AMD Ryzen Balanced plan)

EDIT:
Been playing around and how about turn PBO and CPB off altogether?
@phill You will run at base speed 3.8Ghz, stock voltage and see where it gets You.
No need for power plans and other shenanigans
I might survive this summer after all!
View attachment 154419

It sure is on air mate, it sucks!! :laugh:

I'm not sure how to use the Ryzen software as such, I've just gone full manual and still not got the best out of it I bet... It's just a warm CPU and under air cooling, not the best.. Which I can understand, so I can't wait to get a water block for it... By the way, which one did you go for??

My Ryzen Master software doesn't look right with triple screens... It's stretched and won't go any smaller, which is somewhat frustrating to say the least!!

If I only have the one screen setup, it works fine, can make it bigger smaller, all sorts but not in the triple mode lol Ugh....

If I ever get chance to look at it and find out more about it, I'll let you know

Lorec · May 10, 2020

phill said:
It sure is on air mate, it sucks!!

I'm not sure how to use the Ryzen software as such, I've just gone full manual and still not got the best out of it I bet... It's just a warm CPU and under air cooling, not the best.. Which I can understand, so I can't wait to get a water block for it... By the way, which one did you go for??

My Ryzen Master software doesn't look right with triple screens... It's stretched and won't go any smaller, which is somewhat frustrating to say the least!!

View attachment 154537

If I only have the one screen setup, it works fine, can make it bigger smaller, all sorts but not in the triple mode lol Ugh....

If I ever get chance to look at it and find out more about it, I'll let you know

I use EK Supremacy EVO, part of ek perfomance kit 360.

Seems Your PBO setting in bios is either auto or disabled.
I dont like Ryzen Master, I had issues with it even on dual monitors :roll:

I had to switch in Windows for single screen mode to start the software otherwise it would bug out.

Anyway its for testing, not for actual long term OC, isnt it.

phill · May 10, 2020

Lorec said:
I use EK Supremacy EVO, part of ek perfomance kit 360.

Seems Your PBO setting in bios is either auto or disabled.
I dont like Ryzen Master, I had issues with it even on dual monitors
I had to switch in Windows for single screen mode to start the software otherwise it would bug out.

Anyway its for testing, not for actual long term OC, isnt it.

Well, I'm going to need to get something, because air cooling sucks :laugh:

But.. That said, in the bios I was setting the vcore to 1.35v (I think, might have been 1.30v :laugh:

but I've just lowered it down to 1.20vcore and well I think a pic would describe it better....

Slightly better than 80 to 85C I think

That said, I'm going to see if I can knock it down a little further, maybe 1.10 to 1.15vcore and then see what sort of boost speeds I'd get. The temps above are after 10 to 15 minutes crunching, so I think that's a definite improvement over what I had previously..

I'm also going to take a look and see where I can find that CPU Block. Water cooling has become massively expensive over the last few years... I'm kinda curious what rad to put with it... I believe my case will fit in 3 or 4 560mm rads, so I'd like to at least put one in for the CPU :laugh:

Lorec · May 11, 2020

phill said:
Well, I'm going to need to get something, because air cooling sucks But.. That said, in the bios I was setting the vcore to 1.35v (I think, might have been 1.30v :lol but I've just lowered it down to 1.20vcore and well I think a pic would describe it better....

View attachment 154675

Slightly better than 80 to 85C I think That said, I'm going to see if I can knock it down a little further, maybe 1.10 to 1.15vcore and then see what sort of boost speeds I'd get. The temps above are after 10 to 15 minutes crunching, so I think that's a definite improvement over what I had previously..

I'm also going to take a look and see where I can find that CPU Block. Water cooling has become massively expensive over the last few years... I'm kinda curious what rad to put with it... I believe my case will fit in 3 or 4 560mm rads, so I'd like to at least put one in for the CPU

3 or 4 560mm rads? Are we talking server rack?

On the picture, cpuz reports 1.3V though, so its like core voltage value being a guideline and then cpu boost and takes more? confusing.

When I crunch 32 tasks, doesn't matter the voltage setting in bios, it will do all core 3.9 at 0.9~1.0V and thats it!

when it comes to cpu blocks there are also those corsair hydro ones, maybe worth a look?

phill · May 11, 2020

Lorec said:
3 or 4 560mm rads? Are we talking server rack?
On the picture, cpuz reports 1.3V though, so its like core voltage value being a guideline and then cpu boost and takes more? confusing.

When I crunch 32 tasks, doesn't matter the voltage setting in bios, it will do all core 3.9 at 0.9~1.0V and thats it!

when it comes to cpu blocks there are also those corsair hydro ones, maybe worth a look?

No server rack sir, just a nice sized PC case... Like this

That a 4 year old Isabelle in the case

So, yes, 3 or 4 560mm rads

I was looking at parts last night and boy are they expensive these days!! But, we'll see what we can do

I'll grab a screen shot again, as lowered it back again this morning and it's just very impressive

The Ryzen's might get a bad ish rep for not overclocking very well, but under volt them and boosh!! They are monsters!!

Oh and here's for another small update with the temps/performance

No Ryzen Master needed anymore

The temps on the CPU have raised a little but that's because of the two 1080 Ti's pumping some heat near the heatsink of the CPU... With a water block installed, I'm very certain that the temps wouldn't rise up like they do on air

But, being myself, I'll obviously have to test

Now if only I could get the Crosshair 8 to do 100.1 for the Bus speed and I'd be sooooo much happier... It seems I can only do 100 or 101 on the bus speed for some reason where as all the previous versions of the board, more so 6 and 7, they allow the 0. changes... I'm unsure why this one wouldn't? @Lorec does yours do the same??

Going to do some further testing with less vcore soon

I need to grab a few screen shots inbetween (yes I'm that OCD ish :laugh:

)

Lorec · May 11, 2020

if You had water cooling with a gpu blocks ,that'd make it worse actually :laugh:

I feel I would have better temps ifit wasnt for my 1080ti on the same loop!
I dont remeber which board You had but on C8H You have to disable SB Clock Spread Spectrum in Tweakers Paradise.

Stays 100Mhz, I have OCD too

How about turning that Core Precision Boost off? Im curious of Your temps on base clock only while crunching, mate

phill · May 11, 2020

Lorec said:
if You had water cooling with a gpu blocks ,that'd make it worse actually I feel I would have better temps ifit wasnt for my 1080ti on the same loop!
I dont remeber which board You had but on C8H You have to disable SB Clock Spread Spectrum in Tweakers Paradise.
View attachment 154749
Stays 100Mhz, I have OCD too

How about turning that Core Precision Boost off? Im curious of Your temps on base clock only while crunching, mate

I'll have a check on that my good sir, but I don't think that worked... I still couldn't put in 100.1 for example, just 100 or 101.. Reason for it is that, it's not 3.50GHz for me... :laugh:

What bios version do you run @Lorec ?? I'll grab a pic of mine.. (I swear there's a way to screenshot the bios but damned if I can remember!! :laugh:

)

Well it's been an interesting evening... Loads of testing and been very rewarding for the results... Bios version I had installed was 0605, so a rather old one.. Now installed 1201 as a mate had it, so worked for me

Can now change the bus speed without any issues, the only issue is if you do that is that it locks the multiplier to whatever you set it at... Which is a little of a pain but otherwise, I might have a play with that at some point... But, I think before I say too much more, here's a couple screen shots, @Lorec I think you might be impressed...

Auto Vcore Setting - 270 to 280w power draw, 90C+ load temps in around 1 minute of run time with WCG. Speeds locked around the 4GHz ish speed, I don't believe they dropped much even at that temp....

So a touch warm there. Cooling is still only air, nothing has changed in that regard... So now, as that was the worst case, here's the best -

VCore set to 0.900v, 145w to 155w power draw, 49Cmax temp after 20 minutes plus load time. CPU speeds seemed to hit 4.20GHz and just sit there...

I thought that didn't look too bad?? Such a difference as well...
However since I've updated the bios, I couldn't get to boot into Windows at 0.9vcore set in the bios, I've had to use at least 1.00vcore for the moment... So temps have increased a little (up to around 52/53C under full load) and the power draw also, (160w to 170w) but still the same 4.20GHz clock speed...

11-05-20 3900X Vcore Test - 1.00v After bios update 1201.PNG

For some reason @Lorec when setting it to 1.00vcore and 38x multi, it gave me this....

11-05-20 3900X Vcore Test - 1.00v 38x 1.PNG

Bit higher temp at 56C under load and 15 minutes or so later, I don't believe the power draw did increase that much but... I've set it to run however and just left it for now. I need to sort out the memory timings, they are terrible so that's going to be the next fun task

I'm so impressed with this CPU it's unreal

Now I'd just love to grab a custom loop and that 3950X and I'll be away with the fairies

(Like I ain't already??!! Ed......)

Lorec · May 12, 2020

phill said:
I'll have a check on that my good sir, but I don't think that worked... I still couldn't put in 100.1 for example, just 100 or 101.. Reason for it is that, it's not 3.50GHz for me...

What bios version do you run @Lorec ?? I'll grab a pic of mine.. (I swear there's a way to screenshot the bios but damned if I can remember!! )

Well it's been an interesting evening... Loads of testing and been very rewarding for the results... Bios version I had installed was 0605, so a rather old one.. Now installed 1201 as a mate had it, so worked for me

Can now change the bus speed without any issues, the only issue is if you do that is that it locks the multiplier to whatever you set it at... Which is a little of a pain but otherwise, I might have a play with that at some point... But, I think before I say too much more, here's a couple screen shots, @Lorec I think you might be impressed...

Auto Vcore Setting - 270 to 280w power draw, 90C+ load temps in around 1 minute of run time with WCG. Speeds locked around the 4GHz ish speed, I don't believe they dropped much even at that temp....

View attachment 154828

So a touch warm there. Cooling is still only air, nothing has changed in that regard... So now, as that was the worst case, here's the best -

VCore set to 0.900v, 145w to 155w power draw, 49Cmax temp after 20 minutes plus load time. CPU speeds seemed to hit 4.20GHz and just sit there...

View attachment 154829

I thought that didn't look too bad?? Such a difference as well...
However since I've updated the bios, I couldn't get to boot into Windows at 0.9vcore set in the bios, I've had to use at least 1.00vcore for the moment... So temps have increased a little (up to around 52/53C under full load) and the power draw also, (160w to 170w) but still the same 4.20GHz clock speed...

View attachment 154830

For some reason @Lorec when setting it to 1.00vcore and 38x multi, it gave me this....

View attachment 154831

Bit higher temp at 56C under load and 15 minutes or so later, I don't believe the power draw did increase that much but... I've set it to run however and just left it for now. I need to sort out the memory timings, they are terrible so that's going to be the next fun task

I'm so impressed with this CPU it's unreal Now I'd just love to grab a custom loop and that 3950X and I'll be away with the fairies (Like I ain't already??!! Ed......)

Incredible temps! All core 4.2 crunching with 53C?

Colour me impressed

How did You managed all this on air??
Im on latest 1302.

Actually 1201 iproved temps quite a lot already.
Anyhow great results,@phill

mstenholm · May 12, 2020

Lorec said:
Incredible temps! All core 4.2 crunching with 53C?
Colour me impressed
How did You managed all this on air??
Im on latest 1302.
View attachment 154891
Actually 1201 iproved temps quite a lot already.
Anyhow great results,@phill

@phill @Lorec Notice the 70.8 W CPU power. There is no way that 4.2 GHz, 70.8 W and 72 degree C is happening at the same time at high load.

phill · May 12, 2020

@Lorec

I wish I knew but I can't wait to try it out on water when I can finally get my water cooling hardware through

I especially love the drop in power consumption as well

280w down to about 150 to 155w or so

mstenholm said:
@phill @Lorec Notice the 70.8 W CPU power. There is no way that 4.2 GHz, 70.8 W and 72 degree C is happening at the same time at high load.

There is indeed some voodoo of Ryzen going on there but that's what's being reported through anything I use for temps/CPU speeds... I've even had a check on with HWMonitor (I've attached some screen shots) just to show what is going on... Still, if it's saving me some pennies with the crunching, it might stay on a little longer

All core, 4.00GHz @ 1.00vcore bios

All core, 4.10GHz @ 1.10vcore bios

All core, 4.20GHz @ 1.15vcore bios

All core, 1.00vcore bios -

Whatever my CPU is doing, from a mate, it's doing it rather well... I'd like to see if I could get this water cooled and report back to see what the deal is....

windwhirl · May 14, 2020

WCG just added new project for COVID-19, although I haven't received anything to do, yet.

mstenholm · May 14, 2020

windwhirl said:
WCG just added new project for COVID-19, although I haven't received anything to do, yet.

View attachment 155196

I just got a load on three rigs....race you to the first badge

I only got 18 pages....

windwhirl · May 14, 2020

mstenholm said:
I just got a load on three rigs....race you to the first badge I only got 18 pages....

My internet connection has been acting funny, so I'm just getting them now.

thebluebumblebee · May 14, 2020

mstenholm said:
I just got a load on three rigs....race you to the first badge I only got 18 pages....

Hoarder!

HammerON · May 14, 2020

I don't have any yet, but it is on my list of projects...

thebluebumblebee · May 15, 2020

TPU is going to announce the OpenPandemics - COVID-19 project on WCG. It will be posted Friday.

As for that project, I'm up to 2 pages of "pending validation".

HammerON · May 15, 2020

I now have six pages in progress

phill · May 15, 2020

Just logged on to take a look and it's auto selected, so will just leave it be

thebluebumblebee · May 15, 2020

Some results:

Arjai · May 15, 2020

Just post the story, HERE.

:lovetpu:

P.S. I have over 40 of them in one of my que's, on this i7 I am using now. There are more on each of my 2700 crunching rigs. The 2 i3's? I don't know, don't feel like Teamview-ing them right now. I figure they have what they have and will crunch them all the same.

mstenholm · May 15, 2020

thebluebu [QUOTE="thebluebumblebee said:
TPU is going to announce the OpenPandemics - COVID-19 project on WCG. It will be posted Friday.

As for that project, I'm up to 2 pages of "pending validation".

Sadly it is a Autodock project (Open Zika and SCC was Vina) so not great points on Linux/AMD.

phill · May 15, 2020

They certainly don't look like they are all that special sadly...

But hey ho

More points to be had and hopefully none of the issues with the FAH Client when it ran out of juice to send new projects out.... I wonder how many people have continued folding after they get their next electric bill?? .....

System Name	Nilin
Processor	Ryzen 9 5800x
Motherboard	Asus Rog Crosshair VIII Hero Wifi
Cooling	Lian Li Galahad AIO 360
Memory	G. Skill TridentZ Neo 32gb 3600Mhz CL16-16-16-36
Video Card(s)	Asus TUF RTX 3080
Storage	Samsung Evo 960 250gb (System), Samsung Evo 860 500gb (Misc), ADATA SX8200PNP (Games)
Display(s)	LG 27" UHD IPS, LG Ultragear 27" WQHD Nano IPS
Case	InWin 303 (7x Fractal Prisma 120mm)
Power Supply	Tt Toughpower Grand RGB 850W
Mouse	Razer Viper Ultimate
Keyboard	SteelSeries Apex 3
Benchmark Scores	https://www.3dmark.com/fs/21022952 (old system)

System Name	Main/DC
Processor	i7-3770K/i7-2600K
Motherboard	MSI Z77A-GD55/GA-P67A-UD4-B3
Cooling	Phanteks PH-TC14CS/H80
Memory	Crucial Ballistix Sport 16GB (2 x 8GB) LP /4GB Kingston DDR3 1600
Video Card(s)	Asus GTX 660 Ti/MSI HD7770
Storage	Crucial MX100 256GB/120GB Samsung 830 & Seagate 2TB(died)
Display(s)	Asus 24' LED/Samsung SyncMaster B1940
Case	P100/Antec P280 It's huge!
Audio Device(s)	on board
Power Supply	SeaSonic SS-660XP2/Seasonic SS-760XP2
Software	Win 7 Home Premiun 64 Bit

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 2 TB 990 Pro
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 10 / Linux / Win 10+Linux

System Name	Not so complete or overkill - There are others!! Just no room to put! :D
Processor	Ryzen Threadripper 3970X
Motherboard	Asus Zenith 2 Extreme Alpha
Cooling	Lots!! Dual GTX 560 rads with D5 pumps for each rad. One rad for each component
Memory	Viper Steel 4 x 16GB DDR4 3600MHz not sure on the timings... Probably still at 2667!! :(
Video Card(s)	Asus Strix 3090 with front and rear active full cover water blocks
Storage	I'm bound to forget something here - 250GB OS, 2 x 1TB NVME, 2 x 1TB SSD, 4TB SSD, 2 x 8TB HD etc...
Display(s)	3 x Dell 27" S2721DGFA @ 7680 x 1440P @ 144Hz or 165Hz - working on it!!
Case	The big Thermaltake that looks like a Case Mods
Audio Device(s)	Onboard
Power Supply	EVGA 1600W T2
Mouse	Corsair thingy
Keyboard	Razer something or other....
VR HMD	No headset yet
Software	Windows 11 OS... Not a fan!!
Benchmark Scores	I've actually never benched it!! Too busy with WCG and FAH and not gaming! :( :( Not OC'd it!! :(

System Name	Nilin
Processor	Ryzen 9 5800x
Motherboard	Asus Rog Crosshair VIII Hero Wifi
Cooling	Lian Li Galahad AIO 360
Memory	G. Skill TridentZ Neo 32gb 3600Mhz CL16-16-16-36
Video Card(s)	Asus TUF RTX 3080
Storage	Samsung Evo 960 250gb (System), Samsung Evo 860 500gb (Misc), ADATA SX8200PNP (Games)
Display(s)	LG 27" UHD IPS, LG Ultragear 27" WQHD Nano IPS
Case	InWin 303 (7x Fractal Prisma 120mm)
Power Supply	Tt Toughpower Grand RGB 850W
Mouse	Razer Viper Ultimate
Keyboard	SteelSeries Apex 3
Benchmark Scores	https://www.3dmark.com/fs/21022952 (old system)

TPU's WCG/BOINC Team

Lorec

thebluebumblebee

mstenholm

phill

Moderator

Lorec

phill

Moderator

Lorec

phill

Moderator

Lorec

phill

Moderator

Lorec

mstenholm

phill

Moderator

windwhirl

mstenholm

windwhirl

thebluebumblebee

HammerON

The Watchful Moderator

thebluebumblebee

HammerON

The Watchful Moderator

phill

Moderator

thebluebumblebee

Arjai

mstenholm

phill

Moderator

System Name	System V
Processor	AMD Ryzen 5 3600
Motherboard	Asus Prime X570-P
Cooling	Cooler Master Hyper 212 // a bunch of 120 mm Xigmatek 1500 RPM fans (2 ins, 3 outs)
Memory	2x8GB Ballistix Sport LT 3200 MHz (BLS8G4D32AESCK.M8FE) (CL16-18-18-36)
Video Card(s)	Gigabyte AORUS Radeon RX 580 8 GB
Storage	SHFS37A240G / DT01ACA200 / ST10000VN0008 / ST8000VN004 / SA400S37960G / SNV21000G / NM620 2TB
Display(s)	LG 22MP55 IPS Display
Case	NZXT Source 210
Audio Device(s)	Logitech G430 Headset
Power Supply	Corsair CX650M
Software	Whatever build of Windows 11 is being served in Canary channel at the time.
Benchmark Scores	Corona 1.3: 3120620 r/s Cinebench R20: 3355 FireStrike: 12490 TimeSpy: 4624

System Name	Aki
Processor	AMD 7800X3D
Motherboard	ASUS ROG STRIX X670E-A
Cooling	MSI MAG CoreLiquid E360
Memory	Patriot Viper Elite 5 32GB 6200
Video Card(s)	PNY RTX 4090 XLR8
Storage	Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s)	Dell 32" Curved Gaming Monitor (S3220DGF)
Case	Corsair 5000D Airflow
Audio Device(s)	On-board
Power Supply	EVGA SuperNOVA 1000 G5
Mouse	Roccat Kone Pure
Keyboard	ASUS ROG Strix Scope II Wireless
Software	Win 11 Pro
Benchmark Scores	Always changing~

System Name	Bay2- Lowerbay/ HP 3770/T3500-2+T3500-3+T3500-4/ Opti-Con/Orange/White/Grey
Processor	i3 2120's/ i7 3770/ x5670's/ i5 2400/Ryzen 2700/Ryzen 2700/R7 3700x
Motherboard	HP UltraSlim's/ HP mid size/ Dell T3500 workstation's/ Dell 390/B450 AorusM/B450 AorusM/B550 AorusM
Cooling	All stock coolers/Grey has an H-60
Memory	2GB/ 4GB/ 12 GB 3 chan/ 4GB sammy/T-Force 16GB 3200/XPG 16GB 3000/Ballistic 3600 16GB
Video Card(s)	HD2000's/ HD 2000/ 1 MSI GT710,2x MSI R7 240's/ HD4000/ Red Dragon 580/Sapphire 580/Sapphire 580
Storage	?HDD's/ 500 GB-er's/ 500 GB/2.5 Samsung 500GB HDD+WD Black 1TB/ WD Black 500GB M.2/Corsair MP600 M.2
Display(s)	1920x1080/ ViewSonic VX24568 between the rest/1080p TV-Grey
Case	HP 8200 UltraSlim's/ HP 8200 mid tower/Dell T3500's/ Dell 390/SilverStone Kublai KL06/NZXT H510 W x2
Audio Device(s)	Sonic Master/ onboard's/ Beeper's!
Power Supply	19.5 volt bricks/ Dell PSU/ 525W sumptin/ same/Seasonic 750 80+Gold/EVGA 500 80+/Antec 650 80+Gold
Mouse	cheap GigaWire930, CMStorm Havoc + Logitech M510 wireless/iGear usb x2/MX 900 wireless kit 4 Grey
Keyboard	Dynex, 2 no name, SYX and a Logitech. All full sized and USB. MX900 kit for Grey
Software	Mint 18 Sylvia/ Opti-Con Mint KDE/ T3500's on Kubuntu/HP 3770 is Win 10/Win 10 Pro/Win 10 Pro/Win10
Benchmark Scores	World Community Grid is my benchmark!!