- Joined
- Oct 9, 2007
- Messages
- 47,235 (7.55/day)
- Location
- Hyderabad, India
| System Name | RBMK-1000 |
|---|---|
| Processor | AMD Ryzen 7 5700G |
| Motherboard | ASUS ROG Strix B450-E Gaming |
| Cooling | DeepCool Gammax L240 V2 |
| Memory | 2x 8GB G.Skill Sniper X |
| Video Card(s) | Palit GeForce RTX 2080 SUPER GameRock |
| Storage | Western Digital Black NVMe 512GB |
| Display(s) | BenQ 1440p 60 Hz 27-inch |
| Case | Corsair Carbide 100R |
| Audio Device(s) | ASUS SupremeFX S1220A |
| Power Supply | Cooler Master MWE Gold 650W |
| Mouse | ASUS ROG Strix Impact |
| Keyboard | Gamdias Hermes E2 |
| Software | Windows 11 Pro |
NVIDIA today shared the design philosophy behind the cooling solution of its next-generation GeForce "Ampere" RTX 3080 / 3090 graphics cards, which we'll hopefully learn more about on September 1, when NVIDIA has scheduled a GeForce Special Event. Part of the new video presentation shows the evolution of NVIDIA's cooling solutions over the years. NVIDIA explains the four pillars behind the design, stressing that thermals are at the heart of its innovation, and that the company looks to explore new ways to use air-cooling more effectively to cool graphics cards. To this effect, the cooling solution of the upcoming GeForce Ampere Founders Edition graphics cards features an airflow-optimized design focused on ensuring the most effective way to take in fresh air, transfer heat to it, and exhaust the warm air in the most optimal manner.
The next pillar of NVIDIA's cooling technology innovation is mechanical structure, to minimize the structural components of the cooler without compromising on strength. The new Founder Edition cooler introduces a new low profile leaf spring that leaves more room for a back cover. Next up is reducing the electrical clutter, with the introduction of a new 12-pin power connector that is more compact, consolidates cabling, and yet does not affect the card's power delivery capability. The last pillar is product design, which puts NVIDIA's innovations together in an airy new industrial design. The video presentation includes commentary from NVIDIA's product design engineers who explain the art and science behind the next GeForce. NVIDIA is expected to tell us more about the next generation GeForce Ampere at a Special Event on September 1.
Although the video does not reveal any picture of the finished product, the bits and pieces of the product's wire-frame model, and the PCB wire-frame confirm the design of the Founders Edition which has been extensively leaked over the past few months. NVIDIA mentioned that all its upcoming cards that come with 12-pin connector include free adapters to convert standard 8-pin PCIe power connectors to 12-pin, which means there's no additional cost for you. We've heard from several PSU vendors who are working on adding native 12-pin cable support to their upcoming power supplies.
The promise of backwards compatibility has further implications: there is no technical improvement—other than the more compact size. If the connector works through an adapter cable with two 8-pins on the other end, its maximum power capability must be 2x 150 W, at the same current rating as defined in the PCIe specification. The new power plug will certainly make graphics cards more expensive, because it is produced in smaller volume, thus driving up BOM cost, plus the cost for the adapter cable. Several board partners hinted to us that they will continue using traditional PCIe power inputs on their custom designs.
The NVIDIA presentation follows.
View at TechPowerUp Main Site
The next pillar of NVIDIA's cooling technology innovation is mechanical structure, to minimize the structural components of the cooler without compromising on strength. The new Founder Edition cooler introduces a new low profile leaf spring that leaves more room for a back cover. Next up is reducing the electrical clutter, with the introduction of a new 12-pin power connector that is more compact, consolidates cabling, and yet does not affect the card's power delivery capability. The last pillar is product design, which puts NVIDIA's innovations together in an airy new industrial design. The video presentation includes commentary from NVIDIA's product design engineers who explain the art and science behind the next GeForce. NVIDIA is expected to tell us more about the next generation GeForce Ampere at a Special Event on September 1.
Although the video does not reveal any picture of the finished product, the bits and pieces of the product's wire-frame model, and the PCB wire-frame confirm the design of the Founders Edition which has been extensively leaked over the past few months. NVIDIA mentioned that all its upcoming cards that come with 12-pin connector include free adapters to convert standard 8-pin PCIe power connectors to 12-pin, which means there's no additional cost for you. We've heard from several PSU vendors who are working on adding native 12-pin cable support to their upcoming power supplies.
The promise of backwards compatibility has further implications: there is no technical improvement—other than the more compact size. If the connector works through an adapter cable with two 8-pins on the other end, its maximum power capability must be 2x 150 W, at the same current rating as defined in the PCIe specification. The new power plug will certainly make graphics cards more expensive, because it is produced in smaller volume, thus driving up BOM cost, plus the cost for the adapter cable. Several board partners hinted to us that they will continue using traditional PCIe power inputs on their custom designs.
The NVIDIA presentation follows.
View at TechPowerUp Main Site
