- Joined
- Apr 21, 2021
- Messages
- 70 (0.05/day)
I thought similar, I set everything to default and deleted my OC profiles for the 920 just in case, basically everything auto or a mix of enabled. The majority of things in my OC profiles were disabled to run strong and lean. Still no post, then downclocked the RAM again to 1333, nada.There's got to be a setting the bios conflicting the issue as I know a few in my head something about setting manually/enabled/disabled is mutli, c1e, timings, vt-d, bumping vcore/qpi voltages, c-states but that as far as I know
I want to give this CPU the benefit of the doubt before I say it's dead, pray. FWIW these are the CPU config settings I loaded initially (from my OC profile), and then set to system defaults (all enabled across the board now):
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetch: Enabled
Ordering: Modern
Intel® Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel (R) HT Technology: Enabled
Active Processor Cores: All
A20M: Disabled
Intel (R) SpeedStep (TM) Tech: Disabled
Intel (R) C-STATE Tech: Disabled
-----
EDIT
Well bless amazon for refunding and letting me keep the CPU, now I hunt for an x5670/50, going to cut my losses on the crossflashing. I feel this x5675 works on the right board. Sucks none of you guys are up here in the North with me, would gladly swap versus rolling the dice online.
Last edited: