Final Fantasy XIV: Endwalker GPU benchmark/Post Your Scores

[Ruru]

First unlock voltage monitoring. To see exactly what happens. Then up the boxe past 1075mV to higher frequency. It should then boost to it. Then up all the curve by bit max out your maximum clock 1093mV.

View attachment 214607

Thanks, I'll try your settings sooner or later today.

 

[tomskie]

Not sure but that look like PSU problem....You should try some other really heavy GPU benchmark and see if that happens again.....

Thanks for the reply. Can you suggest a really good GPU benchmark? I tried 3D mark and my GPU was fine.

 

[Zyll Goliat]

Thanks for the reply. Can you suggest a really good GPU benchmark? I tried 3D mark and my GPU was fine.

Well 3d Mark is good benchmark but the thing is that probably not making the most pressure on your GPU especially if you did the test in just 1080p.....Even if is it old I will still suggest Heaven Benchmark just choose higher resolution and details and see how that goes....Also Furmark will make your GPU to work on constant 100% load but do not use it for long time 5-10 min at most.....

P.S.One more thing maybe you actually have the problem when CPU&GPU is under the heavy load because then your PC actually using the Maximum Wattage and making the most pressure on your PSU and can not provide that amount of power anymore....So to be absolutely sure if that is your problem you can start Furmark in combo (at the same time) with the Cinebench or some other Cpu benchmark and then your PC will use Maximum power....If it restart you will know that your PSU simply can not handle that....GL

 

[tomskie]

Well 3d Mark is good benchmark but the thing is that probably not making the most pressure on your GPU especially if you did the test in just 1080p.....Even if is it old I will still suggest Heaven Benchmark just choose higher resolution and details and see how that goes....Also Furmark will make your GPU to work on constant 100% load but do not use it for long time 5-10 min at most.....

P.S.One more thing maybe you actually have the problem when CPU&GPU is under the heavy load because then your PC actually using the Maximum Wattage and making the most pressure on your PSU and can not provide that amount of power anymore....So to be absolutely sure if that is your problem you can start Furmark in combo (at the same time) with the Cinebench or some other Cpu benchmark and then your PC will use Maximum power....If it restart you will know that your PSU simply can not handle that....GL

Ok. I did more tests. I ran heaven benchmark, furmark (3mins), timespy stress test(20 mins). No issues. I re-dl endwalker benchmark and the problem is still there. Seems like im only having issue with the endwalker benchmark. Is it possible that the endwalker benchmark is the most demanding test out of all?Ill try ur combo suggestion. I really appreciate your help.

p.s. i was able to run endwalker benchmark the first few tries when i first swapped my gpu. But when i changed the aettings from maximum to high, thats when i started having problems.

 

[nguyen]

Ok. I did more tests. I ran heaven benchmark, furmark (3mins), timespy stress test(20 mins). No issues after all those. I re-dl endwalker benchmark and the problem is still there. Seems like im only having issue with the endwalker benchmark. Ill try ur combo suggestion. I really appreciate your help.

Your 3080 Ti is boosting to unstable clocks in this benchmark, set -45mhz on the core clock in MSI Afterburner and try again.

 

[Zyll Goliat]

Ok. I did more tests. I ran heaven benchmark, furmark (3mins), timespy stress test(20 mins). No issues. I re-dl endwalker benchmark and the problem is still there. Seems like im only having issue with the endwalker benchmark. Is it possible that the endwalker benchmark is the most demanding test out of all?Ill try ur combo suggestion. I really appreciate your help.

p.s. i was able to run endwalker benchmark the first few tries when i first swapped my gpu. But when i changed the aettings from maximum to high, thats when i started having problems.View attachment 214624

Ok...At least you managed to finally finish the benchmark.....you can try what @nguyen suggested and see how that goes tho' that seems a bit weird that your GPU boosting to unstable clocks only in that benchmark and nowhere else and it's even more weird to restart the whole system instead of just restarting the driver and just recover in windows.....

 

[tomskie]

Ok...At least you managed to finally finish the benchmark.....you can try what @nguyen suggested and see how that goes tho' that seems a bit weird that your GPU boosting to unstable clocks only in that benchmark and nowhere else and it's even more weird to restart the whole system instead of just restarting the driver and just recover in windows.....

My bad, i was only able to finish my benchmark the very first time i swapped my gpu to 3089ti. The problem started to happen after changingmy settings from maximum to high. And it is still occuring now. Will try @nguyen suggestion when i get home

Update: I followed @nguyen 's suggestion(thank you for that) but i had to lower the core clock down more to -75 and i manage to finish benchmark with no issues at maximum settings a few times. But when i change the settings to high, the problem comes back. Does this mean that I have a defective card? Or is it an issue with my other pc components?

 

[mrthanhnguyen]

AMD RIG

 

[Zyll Goliat]

AMD RIG

View attachment 214658

Nice Score!!! You enter the Leaderboard chart as you beat other RX 6900XT and improve THE BEST AMD GPU SCORE on the chart!!!

 

[mrthanhnguyen]

Nice Score!!! You enter the Leaderboard chart as you beat other RX 6900XT and improve THE BEST AMD GPU SCORE on the chart!!!

I will reclaim the first place for Intel/Nvidia later when I have time. Only 3 more points.

 

[ThrashZone]

Nice!!!...Congrats @mobiuus !!!You are back on the chart leaderboard!!!!
Does @ThrashZone have the answer for this???

Hi,
Looks like I do have a little more after all lol

 

[mrthanhnguyen]

Hi,
Looks like I do have a little more after all lolView attachment 214714

Come on man, upgrade your 1080ti. Its ancient. Buy rtx 3090 and Supercool direct die for your 10900k.

 

[Zyll Goliat]

Come on man, upgrade your 1080ti. Its ancient. Buy rtx 3090 and Supercool direct die for your 10900k.

I will be so happy with that "Ancient" GPU!!!
Leaderboard Chart Updated!!!

 

[ThrashZone]

I will be so happy with that "Ancient" GPU!!!
Leaderboard Chart Updated!!!

Hi,
Okay but you'll have to make sure 20738 new score goes to ThrashZone this time lol

 

[Zyll Goliat]

Hi,
Okay but you'll have to make sure 20738 new score goes to ThrashZone this time lol
View attachment 214718

Srry that was my bad ....Whoa!!!Yours 1080TI is really Golden!!!

 

[ThrashZone]

Srry that was my bad ....Whoa!!!Yours 1080TI is really Golden!!!

Hi,
No problem
Not really apex doing what it does best and found a rabbit hole
20810

 

[Athlonite]

@ThrashZone this goes to prove this bench is way more dependant on CPU IPC speed than it is on GPU speed

 

[ThrashZone]

@ThrashZone this goes to prove this bench is way more dependant on CPU IPC speed than it is on GPU speed

Hi,
Yep said it a while back for a gpu bench it loves system memory speed and cpu clocks too
Trying for 21000 dang it got 20919 so far :/

 

[Athlonite]

What clocks do you have on the 10900K

 

[ThrashZone]

What clocks do you have on the 10900K

Hi,
All here have been at 5.3
Memory is up now to 4400c16 topping out at 20919 so far.

All she wrote for today

 

[Space Lynx]

Hi,
All here have been at 5.3
Memory is up now to 4400c16 topping out at 20919 so far.

All she wrote for today
View attachment 214734

That's a nice score for a 1080 ti. Well done!

 

[Zyll Goliat]

That's a nice score for a 1080 ti. Well done!

It's Insane....almost good as 3080 score on the chart!!!

 

[Space Lynx]

@ThrashZone what OC you got on it in MSI AB? and what ram OC do you have? surely your ram is OC'd to be getting that score too. ram and VRAM!

 

[purecain]

Going mad, i cant seem to get it to run. I just get the opening little splash scrn then nothing. Meh... Anyone any idea whats im doing wrong. Do you have to install this bench or something??? running win10 rig in sig!

 

[Zyll Goliat]

Going mad, i cant seem to get it to run. I just get the opening little splash scrn then nothing. Meh... Anyone any idea whats im doing wrong. Do you have to install this bench or something??? running win10 rig in sig!

It's just a simple DX 11 benchmark that starts on"ffxiv-endwalker-bench.exe"file if all the files are in same dir that's it nothing more .....I guess that must be something wrong on your side.....