I worked out how to get Flash ID working - had to disable VMD in BIOS.
Results for my 2TB NV2 posted previously... It's QLC...
Drive : 1(NVME)
Scsi : 1
IOCtl: NVME_OF failed 0x1!
Driver : W10
Model : KINGSTON SNV2S2000G
Fw : SBM02103
HMB : 65536 - 65536 KB (Enabled, 64 M)
Size : 1907729 MB [2000.4 GB]
LBA Size : 512
Controller: [SM2267XT] bufferless
Bank00: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank01: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank02: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank03: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank04: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank05: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank06: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank07: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank08: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank09: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank10: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank11: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank12: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank13: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank14: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Bank15: 0x89,0xd3,0xac,0x32,0xc6,0x0,0x0,0x0 - Intel 144L QLC 1024Gb/CE 1024Gb/die
Channel: 4
CE : 4
Plane : 4
Die/Ce : 1
Ch map : 0x0F
CE map : 0x0F
Bit Per Cell : (SLC)
Inter. : 4
Pages/Block : 9216(2304)
First Fblock : 1
Total Fblock : 258
Total Hblock : 29809
Fblock Per Ce : 258
Fblock Per Die: 258
Original Spare Block Count : 21
Vendor Marked Bad Block : 0
Bad Block From Pretest : 6
IOCtl: NVME_W10_GetLog 0x45d!