2022-X58/1366 PIN Motherboards NVME M.2 SSD BIOS MOD Collection

[İsmailTPC_Hastanesi]

GREAT, IT WORKS!!!
Installing Windows right now
Thank you so much!
I ll report disk speed later!

This is great..
Waiting for your data..

 

[leevv]

This is great..
Waiting for your data..

here is my disk.
Much faster than I had before !
Thank you very much, again!

 

[bmn007]

I have stated that I will no longer support the bios file refresh process.
But I can continue with help requests for bios files with some issues that I posted here.
After this project is completed as promised, I can move on to other projects.
It depends on the Request from Users.

Gigabyte GA-X58A-OC NVMe SSD BIOS File fixed.
Just a minor issue...
Bios file Fixed.

• 2022/Gigabyte GA-X58A-OC NVMe SSD BIOS MOD

Thank you Ismail, GA-X58A-OC works now without any boot loop issues. but my nvme ssd device is not visible in bios even though previous other users are provided these hardware id's.

Installed windows 11 with GPT/UEFI mode. Able to detect my nvme SSD disk during windows install, after fresh install, it does not detect my Samsung 980 pro nvme ssd device to boot.

With MBR(legacy bios mode) , it does not allow to install windows 11 on this Samsung 980 pro nvme ssd device. error message says controller is not loaded, enable in bios.

what options of windows 11 should be selected in rofus tool --- MBR(legacy bios) or GPT(UEFI bios)?

@dejan_bin_laden I have 3 nvme ssd devices( Samsung 980 pro, 980 and 970 Evo plus , all 1TB devices) , can you add all three ssd devices?

Hardware id's for Samsung 980 pro 1TB NVMe
PCI\VEN_144D&DEV_A80A&SUBSYS_A801144D&REV_00
PCI\VEN_144D&DEV_A80A&SUBSYS_A801144D
PCI\VEN_144D&DEV_A80A&CC_010802
PCI\VEN_144D&DEV_A80A&CC_0108

Hardware id's for Samsung 980 1TB NVMe
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D&REV_00
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D
PCI\VEN_144D&DEV_A809&CC_010802
PCI\VEN_144D&DEV_A809&CC_0108

Hardware id's for Samsung 970 Evo Plus 1TB NVMe
PCI\VEN_144D&DEV_A808

 

[milkxxx]

Yes, he said it worked.
So how about a motherboard reboot?
Does it freeze on reboot?
A line on the screen and just waiting?

Ismail, hello! The modified bios dejan_bin_laden for my ASUS P6X58D Premium works fine in any modes. If necessary, I can make a video! Maybe you just didn't understand each other. And thank you again for your efforts!

 

[İsmailTPC_Hastanesi]

Thank you Ismail, GA-X58A-OC works now without any boot loop issues. but my nvme ssd device is not visible in bios even though previous other users are provided these hardware id's.

Installed windows 11 with GPT/UEFI mode. Able to detect my nvme SSD disk during windows install, after fresh install, it does not detect my Samsung 980 pro nvme ssd device to boot.

With MBR(legacy bios mode) , it does not allow to install windows 11 on this Samsung 980 pro nvme ssd device. error message says controller is not loaded, enable in bios.

@dejan_bin_laden I have 3 nvme ssd devices( Samsung 980 pro, 980 and 970 Evo plus , all 1TB devices) , can you add all three ssd devices?

Hardware id's for Samsung 980 pro
PCI\VEN_144D&DEV_A80A&SUBSYS_A801144D&REV_00
PCI\VEN_144D&DEV_A80A&SUBSYS_A801144D
PCI\VEN_144D&DEV_A80A&CC_010802
PCI\VEN_144D&DEV_A80A&CC_0108

Hardware id's for Samsung 980
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D&REV_00
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D
PCI\VEN_144D&DEV_A809&CC_010802
PCI\VEN_144D&DEV_A809&CC_0108



what options of windows 11 should be selected in rofus tool --- MBR(legacy bios) or GPT(UEFI bios)?

I've completed the Gigabyte X58 Nvme SSD bios mod project and I'm sorry I can no longer respond to new hardware ID update requests.
These demands never end.
I am very busy and I have a lot of work waiting for me.
You can ask other people who want to help.
Might be @dejan_bin_laden which I hope will help.
I hope it will help.
Finally, PCI\VEN_144D&DEV_A809 this module already exists in the bios file content that I have corrected for you.

here is my disk.
Much faster than I had before !
Thank you very much, again!

Thank you very much for the feedback..
This information will be of great help to those who have other X58 motherboards.

 

[İsmailTPC_Hastanesi]

ASUS X58 NVMe SSD BIOS MOD Files All Completed.

• 2022/ASUS Z8NA-D6 NVMe SSD BIOS MOD
• 2022/ASUS Z8NA-D6C NVMe SSD BIOS MOD
• 2022/ASUS Z8NH-D12 NVMe SSD BIOS MOD
• 2022/ASUS Z8NR-D12 NVMe SSD BIOS MOD
• 2022/ASUS Z8PE-D12 NVMe SSD BIOS MOD
• 2022/ASUS Z8PE-D12X NVMe SSD BIOS MOD
• 2022/ASUS Z8PE-D18 NVMe SSD BIOS MOD
• 2022/ASUS Z8PH-D12 SE/QDR NVMe SSD BIOS MOD
• 2022/ASUS Z8PH-D12/IFB NVMe SSD BIOS MOD
• Completed

Jetway

• 2022/Jetway BI-600 NVMe SSD BIOS MOD
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

FOXCONN

• 2022/Foxconn Bloodrage NVMe SSD BIOS MOD
• 2022/Foxconn Bloodrage GTI NVMe SSD BIOS MOD
• 2022/Foxconn Renaissance II NVMe SSD BIOS MOD
• 2022/Foxconn FlamingBlade NVMe SSD BIOS MOD
• 2022/Foxconn FlamingBlade GTI NVMe SSD BIOS MOD
• 2022/Foxconn Renaissance NVMe SSD BIOS MOD
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

 

[bmn007]

I've completed the Gigabyte X58 Nvme SSD bios mod project and I'm sorry I can no longer respond to new hardware ID update requests.
These demands never end.
I am very busy and I have a lot of work waiting for me.
You can ask other people who want to help.
Might be @dejan_bin_laden which I hope will help.
I hope it will help.
Finally, PCI\VEN_144D&DEV_A809 this module already exists in the bios file content that I have corrected for you.

Finally, I was able to install windows 11 on gigabyte GA-X58A-OC motherboard in legacy bios mode (with MBR partition and remove the requirements for tpm and secureboot checks option using rofus tool) on a Samsung 980 nvme drive 1TB ( PCI\VEN_144D&DEV_A809 ).

 

[shurella]

I've shared my PCI OpRom module work on a RUS forum before, but obviously it didn't work for them or they didn't like me.

peace v
can you give link on rus forum, where shared your work
thank`s

 

[İsmailTPC_Hastanesi]

Finally, I was able to install windows 11 on gigabyte GA-X58A-OC motherboard in legacy bios mode (with MBR partition and remove the requirements for tpm and securrboot checks option using rofus tool) on a Samsung 980 nvme drive 1TB ( PCI\VEN_144D&DEV_A809 ).

I like to voluntarily help people who are useful to society.
The truth of the matter is that you are doing useful work for the other society with these pictures.
You are not selfish, on the contrary, you like to share.
I've added other hardware information for the motherboard's NVMe SSD and made it available for any NVMe SSD you have.
Added NVMe SSD Hardware IDs:
PCI\VEN_144D&DEV_A80A
PCI\VEN_144D&DEV_A809
PCI\ VEN_144D&DEV_A808
Actually, I was hoping @dejan_bin_laden could help you, but unfortunately he couldn't answer.
I wish he could help and that's how he would help me.
Anyway.
I hope you can manage this latest bios file flashing without any problems.
I am waiting for your reply.

• 2022/Gigabyte GA-X58A-OC NVMe SSD BIOS MOD

peace v
can you give link on rus forum, where shared your work
thank`s

What would change if I gave the link to the Russian forum site?
It doesn't matter.
I guess they thought I was curbing their "constant buying spree".
Whatever,
Finally, I have prepared a file for you.
I hope you will let us know after the update here.
Good luck with.

• 2022/Gigabyte GA-EX58-UD3R (Revision 1.6/1.7) NVMe SSD BIOS MOD

 

[shurella]

What would change if I gave the link to the Russian forum site?

peace v
Nothing would change for you.
It would be easier for me to figure out what to do))
However, now it may not be necessary to understand.
Thanks for your hard work. Allah bless you.

P.S. If I don't make a brick out of my mother, I will definitely take measurements and post the results.

peace v
Nothing would change for you.
It would be easier for me to figure out what to do))
However, now it may not be necessary to understand.
Thanks for your hard work. Allah bless you.

P.S. If I don't make a brick out of my mother, I will definitely take measurements and post the results.

no miracle happened))
there was a long delay during booting
legend960 didn't show up boot from su635
the question of the link to the Russian forum remains))
https://cloud.mail.ru/public/8tuQ/Gzn5NovGz - link on video with booting process

P.S. I flashed ROM with the utility from the BIOS (F8)

no miracle happened
there was a big delay in uploading
legend960 did not show download from su635
the question of the link to the Russian forum remains))
https://cloud.mail.ru/public/8tuQ/Gzn5NovGz - link to the video with the download process

PS I flashed the ROM with a utility from the BIOS (F8)

In addition, I inform you
that I disconnected all drives,
then connected only legend960.
Change ide/ahci settings.
This manipulation did not help.

But in ide mode, loading was faster.
All my other drives are in Ahci mode.

 

[İsmailTPC_Hastanesi]

In addition, I inform you
that I disconnected all drives,
then connected only legend960.
Change ide/ahci settings.
This manipulation did not help.

But in ide mode, loading was faster.
All my other drives are in Ahci mode.

What were the hardware credentials of your NVMe SSD you are using?

 

[shurella]

What were the hardware credentials of your NVMe SSD you are using?

a piece of textolite in primary pci-e 16x
in windows ssd work without error

 

[İsmailTPC_Hastanesi]

a piece of textolite in primary pci-e 16x
in windows ssd work without error

No, I didn't mean the adapter.

The BIOS MOD Files published here do not contain the Universal Module.
Because each X58 model motherboard needs to be added one by one NVMe_Module.
For this, you need to provide the X58 motherboard model and NVMe SSD Device hardware IDs you are using.
For example: PCI/VEN_144D&DEV_A809 it should be something like this.

I Completed All NVMe SSD BIOS MOD files for X58/1366 Socket Motherboard..
My Recent Works Are Below.
This Project Has Been Successfully Completed.
I hope this thread will benefit many X58 Users.
All BIOS MOD Files Published Here is a great work that I have created with my own great effort/patience and dedication.
My own special software has been used in bios file modification processes.
What others have said for "AWARD" bios modding;
"Sensitive modules cannot be changed"
The claim has been refuted with real evidence in this study, asserting the opposite thesis.
In short, AWARD bios or any different bios file can be modded and changed.
Each bios file has been handled one by one, and the bios files with successful results are marked.
The Module I used to support NVMe SSD drives in Bios Files was given as FALSE when it was released.
The NVMe SSD module was corrected by me and successful results were obtained.
Bios files that have not received "TEST OK" confirmation will be updated according to data from users.
See you in many more new projects.

Sapphire

• 2022/Sapphire Pure Black X58 SLI NVMe SSD BIOS MOD (TEST OK)
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

Shuttle

• 2022/Shuttle SX58H7 NVMe SSD BIOS MOD
• 2022/Shuttle SX58H7 Pro NVMe SSD BIOS MOD
• 2022/Shuttle SX58J3 NVMe SSD BIOS MOD
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

XFX

• 2022/XFX X58i NVMe SSD BIOS MOD
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

Zotac

• 2022/Zotac X58SLI-A-E NVMe SSD BIOS MOD
• Completed
• Brand/Model completed bios files will not be updated again.
  After that, special Bios requests will unfortunately not be answered.
  Reason;
  Since I am extremely busy, the bios modding process for each NVMe SSD module takes a lot of time..
  Bios requests will not be interrupted and there will be many requests for individual bios modding for the user.
  That's why I don't have much time.

 

[shurella]

No, I didn't mean the adapter.

The BIOS MOD Files published here do not contain the Universal Module.
Because each X58 model motherboard needs to be added one by one NVMe_Module.
For this, you need to provide the X58 motherboard model and NVMe SSD Device hardware IDs you are using.
For example: PCI/VEN_144D&DEV_A809 it should be something like this.

16.01.2023 wrote about it, nothing has changed)))

PCI\VEN_1CC1&DEV_622A&SUBSYS_622A1CC1&REV_03
PCI\VEN_1CC1&DEV_622A&SUBSYS_622A1CC1
PCI\VEN_1CC1&DEV_622A&CC_010802
PCI\VEN_1CC1&DEV_622A&CC_0108

 

[İsmailTPC_Hastanesi]

16.01.2023 wrote about it, nothing has changed)))

PCI\VEN_1CC1&DEV_622A&SUBSYS_622A1CC1&REV_03
PCI\VEN_1CC1&DEV_622A&SUBSYS_622A1CC1
PCI\VEN_1CC1&DEV_622A&CC_010802
PCI\VEN_1CC1&DEV_622A&CC_0108

File is ready..
Waiting for results..

2022/Gigabyte GA-EX58-UD3R (Revision 1.6/1.7) NVMe SSD BIOS MOD

 

[shurella]

i see legend960 nvme in bios boot select, but must sleep, tomorrow need go to work at 6.00, after my work continue and report.
thank`s a lot Ismail, blees for you health.

 

[Bad_dude]

Hello,
I have an Asus P6T Rev. 1.0. I flashed the bios given here but it didn't give me an option to boot from an add-in card nor does my WD Black SN770 1TB. It doesn't show in my BIOS the drive. Any suggestions?
My controller ID is
PCI\VEN_15B7&DEV_5017&CC_0108
Could you help me with the BIOS fix?
Thanks.

 

[shurella]

Peace V.
Result:
after any changing settings in bios Mother finish any responds no beeping, black screen ets... Clear CMOS resolved this problem. With minimal bios manipulation, just off all additional integrated in mother devices I can successful install windows 11. Now I am in process drivers and soft update. After measure speed I post result this. Sorry 4 my English, typing from phone without translator.

Ismail you are cool. Thanks. Continue bless 4 your health.

 

[shurella]

If need any measurement more or information tell me, i do it.

 

[İsmailTPC_Hastanesi]

If need any measurement more or information tell me, i do it.

There may be pictures for the bios boot option and the settings you changed in the bios, and pictures for the desktop hardware information.
How is its performance?

 

[aaron158]

Will Western Digital Black AN1500 WDS100T1X0L work with with a gigabyte ga-x58a-ud7 rev 1.

were do we find the list of witch nvme drives are added on to the bios?

 

[İsmailTPC_Hastanesi]

Will Western Digital Black AN1500 WDS100T1X0L work with with a gigabyte ga-x58a-ud7 rev 1.

were do we find the list of witch nvme drives are added on to the bios?

Read the first page carefully.

 

[aaron158]

Read the first page carefully.

so u just need the hardware id and u will provide the bios with that drive added? just want to be sure before i order the drive because its rather expensive.

thanks.

 

[bmn007]

Thanks Ismail for adding nvme support for asus p6t7 ws supercomputer motherboard. I was able to update the bios and installed windows 11 in legacy bios mode on samsung 980 1tb nvme drive. Few screenshots are attached.

 

[Bad_dude]

Could you help me with mine. Asus P6T rev. 1.0
Thanks.