• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Ghetto Mods

Joined
Jun 27, 2006
Messages
21 (0.00/day)
Processor Sempron 2500+ / A64 3200+ Venice / 530J / 3800+ AM2 /
Motherboard Foxconn 754 / DFI SLI-D / ASUS P5WD2-E Prem / ECS KA3 MVP
Cooling RX-K8 Silent Boost / Corsair Nautilus 500 / Full Custom Watercooling / Mini Typhoon With A Delta
Memory 2x1GB Ultra Value / 2x512MB GX @ 252 / 2x1024 Super Talent @ 1000, 44410 / 2x1024 Super Talent
Video Card(s) Nvidia 6800GT / PCI / PCI / PCI (lol)
Storage WD 250-16 SATA / 2x80GB Maxtor SATA, WD 250 PATA / 80GB WD / 80GB WD
Display(s) IBM P160
Case Ultra Products Microfly / ICute 0508 / Test Bench / Test Bench
Audio Device(s) Onboard
Power Supply Ultra X2 550W / Enermax Liberty / V-Series 400 (Temp) / V-Series 400 (Temp)
Software Custom XP Pro Installs
It’s not really a mod.. but it’s a little ghetto in the looks department. I stripped the crossbar on my first FC140, so I took the one off of my TRUE Black :D
This reminds me of the X bracket for the TRUE - If you stuck a nickel between the bracket and the sink, temps would drop by a few degrees.

I have a bunch of content for this thread, I just have to dig em out. In the meantime, have an X800 AIO that came to me. Tested it the first time, blackscreen. That KT4 board is hokey. Switched to a K8V that's known working... A VRM decided to release the magic smoke.

1678819768527.png
 

Count von Schwalbe

Moderator
Staff member
Joined
Nov 15, 2021
Messages
3,070 (2.77/day)
Location
Knoxville, TN, USA
System Name Work Computer | Unfinished Computer
Processor Core i7-6700 | Ryzen 5 5600X
Motherboard Dell Q170 | Gigabyte Aorus Elite Wi-Fi
Cooling A fan? | Truly Custom Loop
Memory 4x4GB Crucial 2133 C17 | 4x8GB Corsair Vengeance RGB 3600 C26
Video Card(s) Dell Radeon R7 450 | RTX 2080 Ti FE
Storage Crucial BX500 2TB | TBD
Display(s) 3x LG QHD 32" GSM5B96 | TBD
Case Dell | Heavily Modified Phanteks P400
Power Supply Dell TFX Non-standard | EVGA BQ 650W
Mouse Monster No-Name $7 Gaming Mouse| TBD
The keyboard sounds doable. The monitor… not so much
I’ll see what I can do :toast:
Active converter to USB-C and a portable monitor?

It would be amusing at the very least.
 
Joined
Sep 27, 2019
Messages
1,212 (0.64/day)
Location
Canada
System Name New compy
Processor AMD Ryzen 5800x3D
Motherboard MSI MPG x570S EDGE MAX WiFi
Cooling Noctua NH-D15S w. FHP141 + Xigmatek AOS XAF-F1451
Memory 32gb G.Skill Ripjaws V Samsung B-Die Dual Rank F4-4000C16D-32GVKA
Video Card(s) ASUS TUF GAMING RTX 4070ti
Storage 17tb (8+4tb WD Black HDD's, 2+2+0.5+0.5tb M.2 SSD Drives) + 16tb WD Red Pro backup drive
Display(s) Alienware AW2518H 24" 240hz, Sony X85K 43" 4k 120hz HDR TV
Case Thermaltake Core v71
Audio Device(s) iFi Nano Idsd Le, Creative T20 + T50, Sennheiser HD6Mix
Power Supply EVGA Supernova G2 1000w
Mouse Logitech G502 Hero custom w. G900 scroll wheel mod, Rival 3 + Rival 3 wireless, JLab Epic Mouse
Keyboard Corsair K68 RGB + K70 RGB + K57 RGB Wireless + Logitech G613
Software Win 10 Pro
Benchmark Scores https://valid.x86.fr/s2y7ny
Saw this on PC Master Race group on fb. It's the $10 2tb drive from aliexpress

335493121_1147680139239417_2212083986445502595_n.jpg
 
Joined
Oct 1, 2014
Messages
1,976 (0.53/day)
Location
Calabash, NC
System Name The Captain (2.0)
Processor Ryzen 7 7700X
Motherboard Asus ROG Strix X670E-A
Cooling 280mm Arctic Liquid Freezer II, 4x Be Quiet! 140mm Silent Wings 4 (1x exhaust 3x intake)
Memory 32GB (2x16) Kingston Fury Beast CL30 6000MT/s
Video Card(s) MSI GeForce RTX 3070 SUPRIM X
Storage 1x Crucial MX500 500GB SSD; 1x Crucial MX500 500GB M.2 SSD; 1x WD Blue HDD, 1x Crucial P5 Plus
Display(s) Aorus CV27F 27" 1080p 165Hz
Case Phanteks Evolv X (Anthracite Gray)
Power Supply Corsair RMx (2021) 1000W 80-Plus Gold
Mouse Varies based on mood/task; is currently Razer Basilisk V3 Pro or Razer Cobra Pro
Keyboard Varies based on mood; currently Razer Blackwidow V4 75% and Hyper X Alloy 65
Saw this on PC Master Race group on fb. It's the $10 2tb drive from aliexpress

View attachment 287828
Oh lawd!

These things are also floating around on Amazon too. Tom's did a story about it a few weeks ago. Basically, if it sounds too good to be true, it probably is, but people be falling for it anyway.
 
Joined
Feb 22, 2016
Messages
1,970 (0.62/day)
Processor Intel i5 8400
Motherboard Asus Prime H370M-Plus/CSM
Cooling Scythe Big Shuriken & Noctua NF-A15 HS-PWM chromax.black.swap
Memory 8GB Crucial Ballistix Sport LT DDR4-2400
Video Card(s) ROG-STRIX-GTX1060-O6G-GAMING
Storage 1TB 980 Pro
Display(s) Samsung UN55KU6300F
Case Cooler Master MasterCase Pro 3
Power Supply Super Flower Leadex III 750w
Software W11 Pro
The keyboard sounds doable. The monitor… not so much
I’ll see what I can do :toast:

My first thought was wondering if you actually went so far as mounting a 80mm intake fan feeding fresh air to the cpu cooler by means of a port formed from plastic binder stiffener. Not sure you have the height to a run it with the stock Intel cooler pulling air from the top.
 
Last edited:

Lei

Joined
Jul 3, 2021
Messages
1,143 (0.92/day)
Location
usually in my shirt
Processor 3900x - Bykski waterblock
Motherboard MSI b450m mortar max BIOS Date 27 Apr 2023
Cooling αcool 560 rad - 2xPhanteks F140XP
Memory Micron 32gb 3200mhz ddr4
Video Card(s) Colorful 3090 ADOC active backplate cooling
Storage WD SN850 2tb ,HP EX950 1tb, WD UltraStar Helioseal 18tb+18tb
Display(s) 24“ HUION pro 4k 10bit
Case aluminium extrusions copper panels, 60 deliveries for every piece down to screws
Audio Device(s) sony stereo mic, logitech c930, Gulikit pro 2 + xbox Series S controller, moded bt headphone 1200mAh
Power Supply Corsair RM1000x
Mouse pen display, no mouse no click
Keyboard Microsoft aio media embedded touchpad (moded lithium battery 1000mAh)
Software Win 11 23h2 build 22631
Benchmark Scores cine23 20000
Joined
Sep 1, 2022
Messages
488 (0.60/day)
System Name Firestarter
Processor 7950X
Motherboard X670E Steel Legend
Cooling LF 2 420
Memory 4x16 G.Skill X5 6000@CL36
Video Card(s) RTX Gigabutt 4090 Gaming OC
Storage SSDS: OS: 2TB P41 Plat, 4TB SN850X, 1TB SN770. Raid 5 HDDS: 4x4TB WD Red Nas 2.0 HDDs, 1TB ext HDD.
Display(s) 42C3PUA, some dinky TN 10.1 inch display.
Case Fractal Torrent
Audio Device(s) PC38X
Power Supply GF3 TT Premium 850W
Mouse Razer Basilisk V3 Pro
Keyboard Steel Series Apex Pro
VR HMD Pimax Crystal with Index controllers

Attachments

  • 1678840572951.png
    1678840572951.png
    2.5 MB · Views: 254
Joined
Sep 1, 2022
Messages
488 (0.60/day)
System Name Firestarter
Processor 7950X
Motherboard X670E Steel Legend
Cooling LF 2 420
Memory 4x16 G.Skill X5 6000@CL36
Video Card(s) RTX Gigabutt 4090 Gaming OC
Storage SSDS: OS: 2TB P41 Plat, 4TB SN850X, 1TB SN770. Raid 5 HDDS: 4x4TB WD Red Nas 2.0 HDDs, 1TB ext HDD.
Display(s) 42C3PUA, some dinky TN 10.1 inch display.
Case Fractal Torrent
Audio Device(s) PC38X
Power Supply GF3 TT Premium 850W
Mouse Razer Basilisk V3 Pro
Keyboard Steel Series Apex Pro
VR HMD Pimax Crystal with Index controllers
That case is bomb for videocard cooling.

Do you get discounts when buying gas with that 'nick?
Sadly not. They would not accept the free advertising deal...
 
Joined
Feb 24, 2023
Messages
3,025 (4.73/day)
Location
Russian Wild West
System Name DLSS / YOLO-PC
Processor i5-12400F / 10600KF
Motherboard Gigabyte B760M DS3H / Z490 Vision D
Cooling Laminar RM1 / Gammaxx 400
Memory 32 GB DDR4-3200 / 16 GB DDR4-3333
Video Card(s) RX 6700 XT / R9 380 2 GB
Storage A couple SSDs, m.2 NVMe included / 240 GB CX1 + 1 TB WD HDD
Display(s) Compit HA2704 / MSi G2712
Case Matrexx 55 / Junkyard special
Audio Device(s) Want loud, use headphones. Want quiet, use satellites.
Power Supply Thermaltake 1000 W / Corsair CX650M / DQ550ST [backup]
Mouse Don't disturb, cheese eating in progress...
Keyboard Makes some noise. Probably onto something.
VR HMD I live in real reality and don't need a virtual one.
Software Windows 10 and 11
My first here.

It was XFX RX 6700 XT Speedster SWFT309 and it became a bizarre frightening beast.

Pic 3 is original temps.
Pic 4 is current temps.

I'm happy I didn't screw my GPU up.
But I will de-ghetto this some day.

"Overstrøm" is Danish for "overcurrent" if you're interested.
 

Attachments

  • photo_2023-03-16_18-46-14.jpg
    photo_2023-03-16_18-46-14.jpg
    154.3 KB · Views: 227
  • photo_2023-03-16_18-53-10.jpg
    photo_2023-03-16_18-53-10.jpg
    111.9 KB · Views: 223
  • photo_2023-03-16_20-34-19.jpg
    photo_2023-03-16_20-34-19.jpg
    102.2 KB · Views: 215
  • photo_2023-03-16_20-34-23.jpg
    photo_2023-03-16_20-34-23.jpg
    75.7 KB · Views: 218
Joined
Aug 20, 2007
Messages
21,463 (3.40/day)
System Name Pioneer
Processor Ryzen R9 9950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage Intel 905p Optane 960GB boot, +2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches + PBT DS keycaps
Software Gentoo Linux x64 / Windows 11 Enterprise IoT 2024
Bluetooth modded 1991 IBM made Model M powered by 4 AA NiMH cells. Integrated OLED battery meter / voltimeter with current reading.




Runs around 10 hours with 4 eneloop pros.

I could probably fit all but the battery pack inside the Model M Chasis but that would be a destructive mod. This is a thing I can rip off this historical kb anytime.
 
Last edited:
Joined
Dec 12, 2020
Messages
1,755 (1.22/day)
The old IBM PS/2 keyboard. I remember back when the all still living cast of MASH did a commercial for Big Blue and the PS/2!
 
Joined
Aug 20, 2007
Messages
21,463 (3.40/day)
System Name Pioneer
Processor Ryzen R9 9950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage Intel 905p Optane 960GB boot, +2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches + PBT DS keycaps
Software Gentoo Linux x64 / Windows 11 Enterprise IoT 2024
Playing "How Low can it go" Limbo right now with it's power source.

PS/2 Spec is technically 4.5-5.5v. Technically usb is only 4.75V to 5.25V, but the bluetooth controller and PS2 converter both can tolerate a wider range at 3v-12v, so we are really only limited by the keyboard. I already know the keyboard is a little "wide range" because it will run on 6volts with 4x AA alkaline batteries in a pinch, but my NiMH cells can go as low as 0.9v each without degrading... 0.9volts x 4 = 3.6volts. Doubt the keyboard will run that low, but curious how low below 4.5v it will tolerate.

If it dies from low voltage, that'd possibly be the lamest IBM death ever. I don't think that'll happen. These things tend to be overbuilt with somewhat insane tolerances...

EDIT: The answer is 3.3volts. The batteries will actually harm themselves slightly before the keyboard shuts off, lol.

Interestingly, this probably means you could run a PS/2 keyboard off of a 3.3v power supply line, just barely, as long as it was not under spec much.

Still, to be nice to the cells, I'm switching to a regulated Panasonic made 4xAA -> 5V 1A output powerbank I bought a bit ago. Should be safer, if a bit less capacity from the conversion and MCU.

Excact part number of the power bank is BQ-CC87, it has a charger built in too. Order one on amazon if you like:

 
Last edited:
Joined
Dec 12, 2020
Messages
1,755 (1.22/day)
R-T-B must REALLY like those IBM PS/2 keyboards. I can't remember if they were mechanical or not or if they could do n-key rollover.
 
Joined
Aug 20, 2007
Messages
21,463 (3.40/day)
System Name Pioneer
Processor Ryzen R9 9950X
Motherboard GIGABYTE Aorus Elite X670 AX
Cooling Noctua NH-D15 + A whole lotta Sunon and Corsair Maglev blower fans...
Memory 64GB (4x 16GB) G.Skill Flare X5 @ DDR5-6000 CL30
Video Card(s) XFX RX 7900 XTX Speedster Merc 310
Storage Intel 905p Optane 960GB boot, +2x Crucial P5 Plus 2TB PCIe 4.0 NVMe SSDs
Display(s) 55" LG 55" B9 OLED 4K Display
Case Thermaltake Core X31
Audio Device(s) TOSLINK->Schiit Modi MB->Asgard 2 DAC Amp->AKG Pro K712 Headphones or HDMI->B9 OLED
Power Supply FSP Hydro Ti Pro 850W
Mouse Logitech G305 Lightspeed Wireless
Keyboard WASD Code v3 with Cherry Green keyswitches + PBT DS keycaps
Software Gentoo Linux x64 / Windows 11 Enterprise IoT 2024
R-T-B must REALLY like those IBM PS/2 keyboards. I can't remember if they were mechanical or not or if they could do n-key rollover.
They are mechanical in the sense that they are durable and feel every bit as good if not better than a modern mechanical. Very tactile. But technically the actual keyswitch is a membrane at least partially.

They do not support n-key rollover, but I never really had a serious need beyond 2KRO and they do that fine (if using modifiers it's more like 4KRO).

If I was a hardcore keyboard "gamer" I'd worry about the loss of timing resolution (PS/2 is like close to 1000hz because it's interrupt driven, bluetooth "polls" at like 250hz at best) but I'm honestly not that worried because my reflexes are far worse.

My main thoughts are "battery life could be better" but I'd need a bluetooth LE controller for that and they cost more than I'm willing to throw at this for probably marginal gains. I've heard some people have had luck replacing some of the old electronics, or applying internal resistors, but I don't want to mod the keyboard.
 
Last edited:
Joined
Apr 18, 2019
Messages
2,366 (1.16/day)
Location
Olympia, WA
System Name Sleepy Painter
Processor AMD Ryzen 5 3600
Motherboard Asus TuF Gaming X570-PLUS/WIFI
Cooling FSP Windale 6 - Passive
Memory 2x16GB F4-3600C16-16GVKC @ 16-19-21-36-58-1T
Video Card(s) MSI RX580 8GB
Storage 2x Samsung PM963 960GB nVME RAID0, Crucial BX500 1TB SATA, WD Blue 3D 2TB SATA
Display(s) Microboard 32" Curved 1080P 144hz VA w/ Freesync
Case NZXT Gamma Classic Black
Audio Device(s) Asus Xonar D1
Power Supply Rosewill 1KW on 240V@60hz
Mouse Logitech MX518 Legend
Keyboard Red Dragon K552
Software Windows 10 Enterprise 2019 LTSC 1809 17763.1757
This reminds me of the X bracket for the TRUE - If you stuck a nickel between the bracket and the sink, temps would drop by a few degrees.

I have a bunch of content for this thread, I just have to dig em out. In the meantime, have an X800 AIO that came to me. Tested it the first time, blackscreen. That KT4 board is hokey. Switched to a K8V that's known working... A VRM decided to release the magic smoke.

View attachment 287805
Okay, you got me to post one of my recent works. (huge contrast in 'finished look' :laugh:)
RadeonInstinctMi25-ProWX9100-12cmPWM12V2A_Fan-Pwr.jpg
RadeonInstinctMi25-ProWX9100-12cmPWM12V2A_IO.jpg
RadeonInstinctMi25-ProWX9100-12cmPWM12V2A_top.jpg

Yes. That's a 120x38mm 1.9A 12VDC 4-pin PWM 'Server Blower' (affectionately named: 'Blowymatron')
Yes. It is powered and auto-controlled by the card. (which, is built to support something like a 3.9A 12VDC 'Squirrel-Cage Screamer')

PS: 'Not-WX9100s' (Reflashed MI25 AKA: The Poors' Vega 64 16GB FE) will do multiple displays via an MST hub. Caveat: No FreeSync, and I'm not spending $50-90 on a hub that claims FreeSync/VRR/G-Sync over DP. I'll just shove my 6500XT in my X570 along with it, somewhere, somehow... That alone will make for another great 'ghetto mod' OC.
 
Last edited:
Joined
Nov 25, 2019
Messages
825 (0.45/day)
Location
Taiwan
Processor i5-9600K
Motherboard Gigabyte Z390 Gaming X
Cooling Scythe Mugen 5S
Memory Micron Ballistix Sports LT 3000 8G*4
Video Card(s) EVGA 3070 XC3 Ultra Gaming
Storage Adata SX6000 Pro 512G, Kingston A2000 1T
Display(s) Gigabyte M32Q
Case Antec DF700 Flux
Audio Device(s) Edifier C3X
Power Supply Super Flower Leadex Gold 650W
Mouse Razer Basilisk V2
Keyboard Ducky ONE 2 Horizon
Just found an old photo of cutting a hole out of my laptop case to maximize airflow, it reduced the CPU temperature by 5 degrees celsius

1679906166849.png
 
Last edited:

silentbogo

Moderator
Staff member
Joined
Nov 20, 2013
Messages
5,541 (1.38/day)
Location
Kyiv, Ukraine
System Name WS#1337
Processor Ryzen 7 5700X3D
Motherboard ASUS X570-PLUS TUF Gaming
Cooling Xigmatek Scylla 240mm AIO
Memory 4x8GB Samsung DDR4 ECC UDIMM
Video Card(s) MSI RTX 3070 Gaming X Trio
Storage ADATA Legend 2TB + ADATA SX8200 Pro 1TB
Display(s) Samsung U24E590D (4K/UHD)
Case ghetto CM Cosmos RC-1000
Audio Device(s) ALC1220
Power Supply SeaSonic SSR-550FX (80+ GOLD)
Mouse Logitech G603
Keyboard Modecom Volcano Blade (Kailh choc LP)
VR HMD Google dreamview headset(aka fancy cardboard)
Software Windows 11, Ubuntu 24.04 LTS
Just found an old photo of cutting a hole out of my laptop case to maximize airflow,
At least it's functional and makes sense. For some reason our local "DIYers" simply snip the plastic grill on the side, and then blame "tight hinges" for their cracked lower chassis :D :D :D
All you need to do now, is add a piece of metal mesh, and it'll be better than factory ))))
 
Joined
Apr 18, 2019
Messages
2,366 (1.16/day)
Location
Olympia, WA
System Name Sleepy Painter
Processor AMD Ryzen 5 3600
Motherboard Asus TuF Gaming X570-PLUS/WIFI
Cooling FSP Windale 6 - Passive
Memory 2x16GB F4-3600C16-16GVKC @ 16-19-21-36-58-1T
Video Card(s) MSI RX580 8GB
Storage 2x Samsung PM963 960GB nVME RAID0, Crucial BX500 1TB SATA, WD Blue 3D 2TB SATA
Display(s) Microboard 32" Curved 1080P 144hz VA w/ Freesync
Case NZXT Gamma Classic Black
Audio Device(s) Asus Xonar D1
Power Supply Rosewill 1KW on 240V@60hz
Mouse Logitech MX518 Legend
Keyboard Red Dragon K552
Software Windows 10 Enterprise 2019 LTSC 1809 17763.1757
Just found an old photo of cutting a hole out of my laptop case to maximize airflow, it reduced the CPU temperature by 5 degrees celsius

View attachment 289427

At least it's functional and makes sense. For some reason our local "DIYers" simply snip the plastic grill on the side, and then blame "tight hinges" for their cracked lower chassis :D :D :D
All you need to do now, is add a piece of metal mesh, and it'll be better than factory ))))

I wonder if I have any pics of the 1st gen i7 Toshiba I did the same procedure to. Toshiba either purposfully or accidentally used a lower chassis from a Pentium/i3-equipped unit; the intake was 100% solid plastic with 'fake grates'.

I cut out the area w/ a dremel(rotary tool) and JBwelded(2-part knead-able epoxy) in a snipped-down fan grille.
It immediately 'fixed' every issue I had with that laptop and I sold it soon after (fully disclosing the modification)
 
Joined
Jan 25, 2020
Messages
2,209 (1.25/day)
System Name DadsBadAss
Processor I7 13700k w/ HEATKILLER IV PRO Copper Nickel
Motherboard MSI Z790 Tomahawk Wifi DDR4
Cooling BarrowCH Boxfish 200mm-HWLabs SR2 420/GTX&GTS 360-BP Dual D5 MOD TOP- 2x Koolance PMP 450S
Memory 4x8gb HyperX Predator RGB DDR4 4000
Video Card(s) Asrock 6800xt PG D w/ Byski A-AR6900XT-X
Storage WD SN850x 1TB NVME M.2/Adata XPG SX8200 PRO 1TB NVMe M.2
Display(s) Acer XG270HU
Case ThermalTake X71 w/5 Noctua NF-A14 2000 IP67 PWM/3 Noctua NF-F12 2000 IP67 PWM/3 CorsairML120 Pro RGB
Audio Device(s) Klipsch Promedia 2.1
Power Supply Seasonic Focus PX-850 w/CableMod PRO ModMesh RT-Series Black/Blue
Mouse Logitech G502
Keyboard Black Aluminun Mechanical Clicky Thing With Blue LEDs, hows that for a name?!
Software Win11pro
Not exactly a ghetto mod but mounting it to anything today would require some serious innovation :D
If I can figure out a way to secure one to an m.2 with some thermal tape...anyhow.
I found these badboys while digging through some long lost boxes and thought you all would appreciate it.
A blast from the past for sure! It's so old Thermalright doesn't even have it on their website anymore lol!


IMG_20230331_000935301_HDR.jpg
 
Joined
Oct 17, 2019
Messages
30 (0.02/day)
System Name Ryżem
Processor AMD ryzen 2700
Motherboard MSI b450 tomahawk
Cooling Silentiumpc grandis 2
Memory 2x8gb corsair venegance
Video Card(s) Zotac gtx 1070 Ti mini noctua industrial 140mm fan
Storage 500 GB Samsung 970 Evo plus, 3tb Toshiba p300, 1tb WD blue
Display(s) Dell 21 inch fhd
Case SilentiumPC regnum rg4t
Audio Device(s) Integrated
Power Supply Seasonic focus plus gold 550
Mouse Logitech Mx master 2s, g100, corsair dark rock pro rgb
Keyboard Motospeed ck104
VR HMD HTC vive pro
Software Windows 10 ltsc
Not exactly a ghetto mod but mounting it to anything today would require some serious innovation :D
If I can figure out a way to secure one to an m.2 with some thermal tape...anyhow.
I found these badboys while digging through some long lost boxes and thought you all would appreciate it.
A blast from the past for sure! It's so old Thermalright doesn't even have it on their website anymore lol!
Zipties? :D
 

Attachments

  • img1.jpg
    img1.jpg
    6.8 MB · Views: 139
Joined
Dec 12, 2020
Messages
1,755 (1.22/day)
Thermalright used to be really innovative in things like videocard cooling and VRM cooling. They had all kinds of interesting heatpipe coolers for videocards. One of them (sidewinder maybe?) could even be mounted in two different orientations.
 

silentbogo

Moderator
Staff member
Joined
Nov 20, 2013
Messages
5,541 (1.38/day)
Location
Kyiv, Ukraine
System Name WS#1337
Processor Ryzen 7 5700X3D
Motherboard ASUS X570-PLUS TUF Gaming
Cooling Xigmatek Scylla 240mm AIO
Memory 4x8GB Samsung DDR4 ECC UDIMM
Video Card(s) MSI RTX 3070 Gaming X Trio
Storage ADATA Legend 2TB + ADATA SX8200 Pro 1TB
Display(s) Samsung U24E590D (4K/UHD)
Case ghetto CM Cosmos RC-1000
Audio Device(s) ALC1220
Power Supply SeaSonic SSR-550FX (80+ GOLD)
Mouse Logitech G603
Keyboard Modecom Volcano Blade (Kailh choc LP)
VR HMD Google dreamview headset(aka fancy cardboard)
Software Windows 11, Ubuntu 24.04 LTS
My ghetto filament holder for my 3D printer.
All it took is a spare steel rod, tension coupler, phone holder to keep it from moving too much, and a shoelace to prevent the spool from falling off(that one is not in pic, but I added it later after knocking it off with my head yesterday during an emergency nozzle cleaning).
IMG_20230330_152313.jpgIMG_20230330_152327.jpg
Just a temporary solution, before I print a normal holder
 
Joined
Sep 14, 2022
Messages
77 (0.10/day)
Location
Finland
System Name NoName
Processor AMD Ryzen 9 7950x3D
Motherboard Msi Tomahawk X670E
Cooling Silentium PC Dual tower cooler
Memory G.Skill 6000MHz Hynix M-die
Video Card(s) AsRock Challenger Arc 750
Storage Kingston KC3000 1 TB, PNY 3030 512GB
Display(s) Lenovo 31,5" 1440p 144Hz
Case Fractal Design Meshify Window White with white bequiet fans
Power Supply Seasonic 750W
Mouse Basic Logitech "silent" mouse
Keyboard Logitech Mx
Software Linux
Not exactly a ghetto mod but mounting it to anything today would require some serious innovation :D
If I can figure out a way to secure one to an m.2 with some thermal tape...anyhow.
I found these badboys while digging through some long lost boxes and thought you all would appreciate it.
A blast from the past for sure! It's so old Thermalright doesn't even have it on their website anymore lol!


View attachment 289899
I had these on some DFI AMD Motherboard, I don't remember motherboard model anymore. I did sell motherboard+Cpu+these Thermalright vrm heatsinks. But I do miss these. Too bad these are so hard to get these days. If I had one of those cheaper motherboards with no VRM heatsink, I would try to mount something like these to board.

Only bad Thermalright product I owned was HR-02 with it's base, which was skewed and did take couple hours of using sand paper to get to the copper base. Nickel base it had was really bad. Temperatures dropped about 10 celsius with this operation, if I remember correctly processor was Q6600. After cpu was lapped temperatures where about 20 degrees lower. So lapping is good thing sometimes.
 
Top