[Intel AX1xx/AX2xx/AX4xx/AX16xx/BE2xx/BE17xx] Intel Modded Wi-Fi Driver with Intel® Killer™ Features

[TCR]

@THEBOSS619

Are you injecting your own certificate as a Root and a CA Authority?
Why don't you just get a legitimate certificate? Then you only have to add it to the Trusted Publishers, which is a lot more secure.

 

[ronildo66]

[ Network adapters / Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW) ]

Device Properties:

Driver Description	Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)
Driver Date	9/2/2024
Driver Version	23.80.0.7
Driver Provider	Intel
INF File	oem222.inf
INF Section	Install_RIV_SLR_HrP2_1650i_AX_2x2_WinT_non_6e
Hardware ID	PCI\VEN_8086&DEV_7A70&SUBSYS_16521A56&REV_11
Location Information	PCI bus 0, device 20, function 3
PCI Device	Intel Raptor Point-S PCH - CNVi: WiFi Controller

Device Resources:

IRQ	65536
IRQ	65536
IRQ	65536
Memory	FFEF8000-FFEFBFFF

 

[THEBOSS619]

@THEBOSS619

Are you injecting your own certificate as a Root and a CA Authority?
Why don't you just get a legitimate certificate? Then you only have to add it to the Trusted Publishers, which is a lot more secure.

By legitimate certificate... Do you mean to let Microsoft sign this modded driver? or is there other ways to do it which is alot more secure? also... is it free? because ngl... I won't pay for it just to get legitimate certificate

[ Network adapters / Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW) ]

Device Properties:

Driver Description	Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)
Driver Date	9/2/2024
Driver Version	23.80.0.7
Driver Provider	Intel
INF File	oem222.inf
INF Section	Install_RIV_SLR_HrP2_1650i_AX_2x2_WinT_non_6e
Hardware ID	PCI\VEN_8086&DEV_7A70&SUBSYS_16521A56&REV_11
Location Information	PCI bus 0, device 20, function 3
PCI Device	Intel Raptor Point-S PCH - CNVi: WiFi Controller

Device Resources:

IRQ	65536
IRQ	65536
IRQ	65536
Memory	FFEF8000-FFEFBFFF

Is there a problem are you suffering from? Does the driver doesn't work?

 

[THEBOSS619]

If you guys are interested into modded ethernet driver & have Realtek ethernet ones. I have made a post about it Have a look at this post [Testers-Needed] Converting Realtek Ethernet to Intel Killer Ethernet chip

 

[hoffer39]

Can you share your Hardware ID? I will look into it

Could you add the following hardware ID of my ax1650 in x570 godlike motherboad.

PCI\VEN_8086&DEV_2723&SUBSYS_16541A56&REV_1A
PCI\VEN_8086&DEV_2723&SUBSYS_16541A56
PCI\VEN_8086&DEV_2723&CC_028000
PCI\VEN_8086&DEV_2723&CC_0280

As I understand the string should look something like this:

%NIC_1650x_2x2_AX% = Install_RIV_QSR_CcP_1650x_AX_2x2_WinT , PCI\VEN_8086&DEV_2723&SUBSYS_16541A56 ; AX

I tried to copy this string from the netwtw08.inf file in the archive attached to my post (that driver is working) to Netwtw6e.INF in your drivers because *08.inf is missing there. But i get message something like "the hash of this file is missing in specified windows catalog file. The file may be corrupted or tampered with". I don't know how to edit *.cat files. Please insert my harware id in your drivers correctly. Thanks in advance!

Oh sorry can't attach zip archive. it's deleted when i click save (of editing) button. You are very smart, so I hope you will figure it out

 

[THEBOSS619]

Could you add the following hardware ID of my ax1650 in x570 godlike motherboad.

PCI\VEN_8086&DEV_2723&SUBSYS_16541A56&REV_1A
PCI\VEN_8086&DEV_2723&SUBSYS_16541A56
PCI\VEN_8086&DEV_2723&CC_028000
PCI\VEN_8086&DEV_2723&CC_0280

As I understand the string should look something like this:

%NIC_1650x_2x2_AX% = Install_RIV_QSR_CcP_1650x_AX_2x2_WinT , PCI\VEN_8086&DEV_2723&SUBSYS_16541A56 ; AX

I tried to copy this string from the netwtw08.inf file in the archive attached to my post (that driver is working) to Netwtw6e.INF in your drivers because *08.inf is missing there. But i get message something like "the hash of this file is missing in specified windows catalog file. The file may be corrupted or tampered with". I don't know how to edit *.cat files. Please insert my harware id in your drivers correctly. Thanks in advance!

Oh sorry can't attach zip archive. it's deleted when i click save (of editing) button. You are very smart, so I hope you will figure it out

No worries at all! Thank you for your kind words Here is it Download the file from the attachment

 

[omergardennart]

Thank you! Here this should hopefully work now

Thank you very much.
It worked perfectly on the BE200.

ViVeTool v0.3.3v 6GHz hotspot on. The only problem is that 6GHz is not active except for 2.4/5GHz in wireless network searches.

I have another problem, I wanted to ask you if this will be fixed with a change in the drivers or not, since you are very knowledgeable. before I was using ax210, 6GHz was not activated, somehow when I changed the region “US” with “intel ant tool”, the router saw 6GHz from the router .but for be200 unfortunately I can not find the new version “intel ant tool”. how else can we solve this “LAR” problem. based on your vast knowledge.

***************************
ANT tool, Version ANT.01908.23.70.0
(C) 2007-2024 Intel corporation / OEM Tools group. All rights reserved.

Detected hardware: Device Identified by crf_id: 0x0f
SetDeviceFromString: GALE
Intel(R) Wi-Fi 7 BE200 320MHz
************************
it seems that ant.exe has been updated. it has seen be200 but I don't understand why it was named GALE, as if it wasn't normally GALE2 (Gale peak2)

This file is not shared anywhere, if you understand the program and coding, you can update it in ant.exe. In HwDetection.xml <Device name=“GALE2” crf_id=“0x0f” rf_type=“0x00f08” /> can be added but we need to find <MAC name=“GALE2” mac_type=????

In short we need to run win11 pro for 6GHz on be200 (24h2 )solution please...
.

Version 22.2000.0.0-05160
(C) 2007-2020 Intel corporation / OEM)
I have attached the old version, I would appreciate if you review it.

intel BE200
WiFi_Intel_23.90.0.2
windows 11 24H2
27729.1000 Windows 11 Pro Insider Preview
Windows Feature Experience Pack 1000.26100.23.0)


I trust your driving skills and ask for help, please

 

[kelkwayo]

Hello,

Installation for my AX210NGW card works perfectly, thanks !

However, when I launch the Killer app (I follow the steps : 1st the batch file and 2nd MS Store) I have an error message "service not executed".
I'm not able to use all the Killer Control Center fonctions... A bit confusing as it was my primary target.

Do you have any clue to solve this ?

 

[THEBOSS619]

Thank you very much.
It worked perfectly on the BE200.

ViVeTool v0.3.3v 6GHz hotspot on. The only problem is that 6GHz is not active except for 2.4/5GHz in wireless network searches.

I have another problem, I wanted to ask you if this will be fixed with a change in the drivers or not, since you are very knowledgeable. before I was using ax210, 6GHz was not activated, somehow when I changed the region “US” with “intel ant tool”, the router saw 6GHz from the router .but for be200 unfortunately I can not find the new version “intel ant tool”. how else can we solve this “LAR” problem. based on your vast knowledge.

***************************
ANT tool, Version ANT.01908.23.70.0
(C) 2007-2024 Intel corporation / OEM Tools group. All rights reserved.
Detected hardware: Device Identified by crf_id: 0x0f
SetDeviceFromString: GALE
Intel(R) Wi-Fi 7 BE200 320MHz
************************
it seems that ant.exe has been updated. it has seen be200 but I don't understand why it was named GALE, as if it wasn't normally GALE2 (Gale peak2)
This file is not shared anywhere, if you understand the program and coding, you can update it in ant.exe. In HwDetection.xml <Device name=“GALE2” crf_id=“0x0f” rf_type=“0x00f08” /> can be added but we need to find <MAC name=“GALE2” mac_type=????
In short we need to run win11 pro for 6GHz on be200 (24h2 )solution please...
.
Version 22.2000.0.0-05160
(C) 2007-2020 Intel corporation / OEM)
I have attached the old version, I would appreciate if you review it.

intel BE200
WiFi_Intel_23.90.0.2
windows 11 24H2
27729.1000 Windows 11 Pro Insider Preview
Windows Feature Experience Pack 1000.26100.23.0)


I trust your driving skills and ask for help, please

I will look into it and come back to you with a solution

Hello,

Installation for my AX210NGW card works perfectly, thanks !

However, when I launch the Killer app (I follow the steps : 1st the batch file and 2nd MS Store) I have an error message "service not executed".
I'm not able to use all the Killer Control Center fonctions... A bit confusing as it was my primary target.

Do you have any clue to solve this ?


View attachment 369823

Have you rebooted your laptop after installation? Sometimes it needs a reboot to function correctly

 

[kelkwayo]

Have you rebooted your laptop after installation? Sometimes it needs a reboot to function correctly

You rock ! I rebooted and it works fine !! All Killer Control Center functions are now available !
Thank you very much.

 

[SPTS_account]

Holy shit thank you so much . My previous Wifi driver kept crashing (Intel AX211 ). I've tried network resetting, system restoring, power flush, etc and when I tried your driver it works perfectly. Not only that but also, my internet has improved significantly. Thank you so much, words can't express how grateful I am .

 

[THEBOSS619]

You rock ! I rebooted and it works fine !! All Killer Control Center functions are now available !
Thank you very much.

Holy shit thank you so much . My previous Wifi driver kept crashing (Intel AX211 ). I've tried network resetting, system restoring, power flush, etc and when I tried your driver it works perfectly. Not only that but also, my internet has improved significantly. Thank you so much, words can't express how grateful I am .

I can't thank you enough for your kind words it brings me so much happiness to see that it fixes issues & improve performance Thank you so much for your time & reporting it. You don't know how grateful I am

 

[hoffer39]

No worries at all! Thank you for your kind words Here is it Download the file from the attachment

Thanks for your great work. Unfortunately it doesn't work for me. Now I get message about missing or corrupted driver but problem with hashes has gone thanks for you. I think it does not work because there are multiple versions of ax1650. In your driver you use 1650i with my hardware id, but my sample is 1650x, not 1650i I suppose (because in factory driver with my id there is a string with 1650x). 1650x is analog of ax200, but 1650i it's analog of ax201, newer chip. My 1650x more old When factory driver is installed correctly and wi-fi is working fine, the label in parentheses in the device manager reads "(200NGW)" not "(201NGW)". That's why I offerred you to insert string:
%NIC_1650x_2x2_AX% = Install_RIV_QSR_CcP_1650x_AX_2x2_WinT , PCI\VEN_8086&DEV_2723&SUBSYS_16541A56 ; AX
that contains 1650x variant.
Please forgive me for writing that something is wrong. I appreciate your work, help, kindness. responsiveness and friendliness anyway! Best wishes and regards! May be you can fix this. No pressure, I don't insist. You are the best!!!

 

[THEBOSS619]

Thanks for your great work. Unfortunately it doesn't work for me. Now I get message about missing or corrupted driver but problem with hashes has gone thanks for you. I think it does not work because there are multiple versions of ax1650. In your driver you use 1650i with my hardware id, but my sample is 1650x, not 1650i I suppose (because in factory driver with my id there is a string with 1650x). 1650x is analog of ax200, but 1650i it's analog of ax201, newer chip. My 1650x more old When factory driver is installed correctly and wi-fi is working fine, the label in parentheses in the device manager reads "(200NGW)" not "(201NGW)". That's why I offerred you to insert string:
%NIC_1650x_2x2_AX% = Install_RIV_QSR_CcP_1650x_AX_2x2_WinT , PCI\VEN_8086&DEV_2723&SUBSYS_16541A56 ; AX
that contains 1650x variant.
Please forgive me for writing that something is wrong. I appreciate your work, help, kindness. responsiveness and friendliness anyway! Best wishes and regards! May be you can fix this. No pressure, I don't insist. You are the best!!!

No worries at all, Thank you so much for being humble & kind I completely understand you they all share the same code & the same features but it's just sometimes they don't play nice with each other properly due to some Wi-Fi chip are working through USB controller rather than using PCI or PCI-E controller and hence this changes everything

This time hopefully it works & fixes for you Let me know how it goes

 

[hoffer39]

No worries at all, Thank you so much for being humble & kind I completely understand you they all share the same code & the same features but it's just sometimes they don't play nice with each other properly due to some Wi-Fi chip are working through USB controller rather than using PCI or PCI-E controller and hence this changes everything

This time hopefully it works & fixes for you Let me know how it goes

I tried new one. Unfortunately result is same as in previous case. Same message that driver is missing or corrupted. I'm sorry to upset you with the bad news. May be my wifi hardware (1650 x) is too old for this driver.. Wish you luck in development!

 

[THEBOSS619]

I tried new one. Unfortunately result is same as in previous case. Same message that driver is missing or corrupted. I'm sorry to upset you with the bad news. May be my wifi hardware (1650 x) is too old for this driver.. Wish you luck in development!

No need to say sorry for anything you did nothing wrong, I'm the one who must say sorry for causing any inconveniences I won't give up, try this one for one more time... maybe this will make it work now

Thank you very much.
It worked perfectly on the BE200.

ViVeTool v0.3.3v 6GHz hotspot on. The only problem is that 6GHz is not active except for 2.4/5GHz in wireless network searches.

I have another problem, I wanted to ask you if this will be fixed with a change in the drivers or not, since you are very knowledgeable. before I was using ax210, 6GHz was not activated, somehow when I changed the region “US” with “intel ant tool”, the router saw 6GHz from the router .but for be200 unfortunately I can not find the new version “intel ant tool”. how else can we solve this “LAR” problem. based on your vast knowledge.

***************************
ANT tool, Version ANT.01908.23.70.0
(C) 2007-2024 Intel corporation / OEM Tools group. All rights reserved.
Detected hardware: Device Identified by crf_id: 0x0f
SetDeviceFromString: GALE
Intel(R) Wi-Fi 7 BE200 320MHz
************************
it seems that ant.exe has been updated. it has seen be200 but I don't understand why it was named GALE, as if it wasn't normally GALE2 (Gale peak2)
This file is not shared anywhere, if you understand the program and coding, you can update it in ant.exe. In HwDetection.xml <Device name=“GALE2” crf_id=“0x0f” rf_type=“0x00f08” /> can be added but we need to find <MAC name=“GALE2” mac_type=????
In short we need to run win11 pro for 6GHz on be200 (24h2 )solution please...
.
Version 22.2000.0.0-05160
(C) 2007-2020 Intel corporation / OEM)
I have attached the old version, I would appreciate if you review it.

intel BE200
WiFi_Intel_23.90.0.2
windows 11 24H2
27729.1000 Windows 11 Pro Insider Preview
Windows Feature Experience Pack 1000.26100.23.0)


I trust your driving skills and ask for help, please

@omergardennart I have made some digging inside .sys files, and I found some registry keys that might help you (hopefully) to prevent bypass LAR function. I couldn't test it because I don't have any kind of region restriction on my location but... it might make a difference for you maybe Here is a picture from where I got it...

What I want you to do is the following... go to regedit and navigate to this key..

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e972-e325-11ce-bfc1-08002be10318}

and then search which folder have your Wi-Fi name on it... you can know that by looking at "AdapterModel" key... like this image...

Now create a DWORD key named "larEnabled" inside the folder like this image..

Then put the value "0" for it.

Do the same thing for the following DWORD keys as well with value "0" for it:-

• larEnabled
• isLarEnabled
• sendLarD3Config
• larQuery11dStatusApi
• larHandleD3ResumeApi
• prvLarRemoveBssEntriesWithInvalidChannels

Now create DWORD and put the value to "1" for those following keys as well:-

• Is6GhzNdoCollocatedOnPsc

then reboot... hopefully it works out for you Your case is the first case I have seen where region restriction is being applied forcibly

 

[SPTS_account]

Hello Theboss619, thanks for ur good work. Unfortunately, the driver seemed to be working fine before but now it is suddenly not working and i'm getting the error (This device cannot start. (Code 10) Insufficient system resources exist to complete the API.) Do you have any solution to this?

 

[THEBOSS619]

Hello Theboss619, thanks for ur good work. Unfortunately, the driver seemed to be working fine before but now it is suddenly not working and i'm getting the error (This device cannot start. (Code 10) Insufficient system resources exist to complete the API.) Do you have any solution to this?

View attachment 370012

oh wow, this happened out of no where? can you share your HardwareID?

 

[SPTS_account]

oh wow, this happened out of no where? can you share your HardwareID?

Yeah out of nowhere.

Here are my hardware ID's

 

[THEBOSS619]

Yeah out of nowhere.

Here are my hardware ID's

View attachment 370015

Uninstall the current ones and install this one instead, hopefully it works for you now You can follow the uninstall instructions from the main post.

 

[Hardware1906]

i tried to run the setup.bat and it stuck at "running admin shell"
pls help

 

[SPTS_account]

Uninstall the current ones and install this one instead, hopefully it works for you now You can follow the uninstall instructions from the main post.

Hello,

The issue still persists Code 10 sadly. In the registry editor I noticed the adapter model was AX411, even tho in device manager, it was AX211. Do you have any recommendations to fix these issues ?

This device cannot start. (Code 10) ^^

Insufficient system resources exist to complete the API.

 

[omergardennart]

Do the same thing for the following DWORD keys as well with value "0" for it:-

• larEnabled
• isLarEnabled
• sendLarD3Config
• larQuery11dStatusApi
• larHandleD3ResumeApi
• prvLarRemoveBssEntriesWithInvalidChannels

Now create DWORD and put the value to "1" for those following keys as well:-

• Is6GhzNdoCollocatedOnPsc

then reboot... hopefully it works out for you Your case is the first case I have seen where region restriction is being applied forcibly

I'm getting scared of you..
6GHz really showed up unexpectedly after I did what you said.
oh wow Wauwww.. excellent
You're the best. MASTER.
.....
I'm grateful to you, maestro.
*************
Then I waited to see how long it would stay on, I mean I surfed the net and it was on for long hours.
When I turned off the computer and turned it back on, unfortunately it lost 6GHz again.

I was happy for a little while. ))
It's a really gratifying achievement. So it will work.
what else can be done?
I can't get into the router “telnet”. i can't find the password after admin in case there is something there that needs to be changed. i tried many variants but; Tenda Rx27 pro
root / Fireitup /admin / 12345678 / 01234567890 / 123456 /admin123456789
You can even change the region easily with “RouterCfm.cfg” in the backup. of course with the list of countries that accept 6 GHz.
“BR” on the router already works as Brazil, 242 comes with adjustment

but after adjusting the settings on the PC we realized that the router was working with 6GHz after all, right?
I have tried the region with other countries and encodings other than “us” and still the pc does not see it. Since I don't know the exact codes for “US” I tried with what I found on the internet but finally I left it back in the original “BR”.

(I have tried the region with other countries and encodings other than “us” and still the pc does not see it. Since I don't know the exact codes for “US” I tried with what I found on the internet but finally I left it back in the original “BR”. )

US
wlan0_countrycode=US , wlan1_countrycode=US , wlan2_countrycode=US ,
wlan0_countryrev=? wlan1_countryrev=? wlan2_countryrev=?
previously failed codes tried on the router;
310 US /311 / 312 / 313 / 313 /314 / 315 /316 / 0

Countries that can run 6GHz smoothly
724 BR Brazil , 262 DE Germany, 242 NO Norway, 385 HR Croatia , ??? US America

) ChatGPT HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WlanSvc\Parameters\HostedNetworkSettings
6GhzBand dword32 1 suggested I add ))) I did that but still no 6GHz.
Region ( US) America on PC...
What else can be done on the PC?

Is it not possible to modify the “intel ant tool” tool that I shared with you? ax210 works without any problem with ant tool without making any changes on the computer. it will be perfect if we can set it in the same way for be200.
(ant tool : If there is a possibility to remove the 2 hour limit completely or to increase it to a maximum of ?? hours, that would be great.

 

[hoffer39]

No need to say sorry for anything you did nothing wrong, I'm the one who must say sorry for causing any inconveniences I won't give up, try this one for one more time... maybe this will make it work now

I feel that I should describe my trouble in more detail. In each of the three cases (archives with your fixed drivers), I get a message in the Wi-Fi adapter properties window from device manager: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). Object name not found" Thank you for your patience and hard work. I wish you well!

 

[Hardware1906]

can you tell me how to enable Smart AP, i tried reinstall the driver multiple times and it didn't work
also, everything except Smart AP work flawlessly