[Intel AX1xx/AX2xx/AX4xx/AX16xx/BE2xx/BE17xx] Intel Modded Wi-Fi Driver with Intel® Killer™ Features

[THEBOSS619]

can you tell me how to enable Smart AP, i tried reinstall the driver multiple times and it didn't work
also, everything except Smart AP work flawlessly
View attachment 370079

re-install the Killer Installer and then reboot

I feel that I should describe my trouble in more detail. In each of the three cases (archives with your fixed drivers), I get a message in the Wi-Fi adapter properties window from device manager: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). Object name not found" Thank you for your patience and hard work. I wish you well!

Oh now I see what you mean I will provide you another one which should fix this error Thank you for reporting and sharing your results just making sure... you uninstall your current driver before installing the new ones right?

 

[omergardennart]

THEBOSS619 (Maestro/Master). Something caught my attention.
I drew my attention in your “Netwtw10.sys” review why I said be200 for “NETwaw16.sys” did not review our product after all wifi 7 .
Netwtw10.sys =ax=wifi6e
NETwaw16.sys=be=wifi7

well “NETwaw16.sys” still advertises the be200 hardware as “Typhoon” when I want to look at the content, even though it is not like you. i am very surprised that the product is still wifi 6e...
wifi 7 is not released.
which intel also stated on its own site that it still works with wifi6e features for be200.

intel ant tool, before running cmd “HwDetection.xml” in “HwDetection.xml” in (be200) “gale” or “gale2” or linux users see the name “GaP2”; I'm not sure what name it is, “intel community” is in someone's share;
ANT tool, Version ANT.01908.23.70.0
(C) 2007-2024 Intel corporation / OEM Tools group. All rights reserved.

Detected hardware: Device Identified by crf_id: 0x0f
SetDeviceFromString: GALE
Intel(R) Wi-Fi 7 BE200 320MHz

RF-Kill is Disabled (RF is ON)
ERROR: -ant_isolation is not supported for this HW...
When you shared the information ****************, it caught my attention;

HwDetection.xml“ in ‘<Device name=’TYPHOON” crf_id=“0x02” rf_type=“0x010D” parameter (wifi 6e ax210)

anyway if this “NETwaw16.sys” detects “TYPHOON”; then
“Device name=“TYPHOON” crf_id=“0x0f” rf_type="0x010D”
“C:\ANT>ANT.exe -QueryMCC

ANT tool, Version 22.2000.0.0-05160

(C) 2007-2020 Intel company / OEM Tools group. All rights reserved.

Detected hardware: Intel(R) Wi-Fi 7 BE200 320MHz

Error: The read command fails with the following condition: , 256 (starting to find “error.”.

(802.11ac (Wi-Fi 5): 0x0108 (Thunder ac9260 /Jefferson - ac9460, 9461
802.11ax (Wi-Fi 6): 0x010C, 0x010A, 0x010D (Typhoon - ax210, ax1675, Garfield -ax211, ax411, ax1690
802.11be (Wi-Fi 7): x0F08 (Gale Peak) 2))

Intel® Wi-Fi 7 BE200 (Gale Peak 2) : crf_id=0x0f
Intel® Wi-Fi 7 BE201 (Fillmore Peak 2): crf_id=0x10
Intel® Wi-Fi 7 BE202 (Misty Peak 2): crf_id=0x11


<Device name="Fillmore2" crf_id="0x10" rf_type="0x0F08" /> mac_type=? specific value
<Device name="Misty2" crf_id="0x11" rf_type="0x0F08" /> mac_type=? specific value
<Device name="Gale" crf_id="0x0F" rf_type="0x0F08" /> mac_type=? specific value

Could it be a 256 error due to not being able to find the “mac” address as a result?
<MAC name="TYPHOON" mac_type="0x0042"
(Gale Peak 2) mac_type= ???

just my observations. brainstorming without “going crazy” without understanding )))

SetDeviceFromString: GALE "where does intel query this parameter?"

crazy questions and fantasies in my head ) (reverseengineering)
make it look like ax210 again without losing be200 drive wifi 7 features ))) what do you say boss (THEBOSS619)

 

[Hardware1906]

re-install the Killer Installer and then reboot


Oh now I see what you mean I will provide you another one which should fix this error Thank you for reporting and sharing your results just making sure... you uninstall your current driver before installing the new ones right?

i tried reinstall multiple times already and it still didn't work
are there any requirements for the Smart AP feature that i dont meet?
P/S: the killer smart ap services is not working on my device "Error 1068: The dependency service or group failed to start"
Another P/S : according to Intel, to use Double Connect feature we need the Killer Wireless Performance Suite, unfortunately i cant install even with modded driver

 

[hoffer39]

re-install the Killer Installer and then reboot


Oh now I see what you mean I will provide you another one which should fix this error Thank you for reporting and sharing your results just making sure... you uninstall your current driver before installing the new ones right?

Yes, I uninstall driver and device with uninstall button in the Wi-Fi adapter properties window from device manager. More over, I uninstall intel inf wi-fi extensions with DriverStoreExplorer software, that you can find on github.

 

[THEBOSS619]

i tried to run the setup.bat and it stuck at "running admin shell"
pls help

I will provide you a customized setup.bat later on you are the second person who have problems with elevation

I'm getting scared of you..
6GHz really showed up unexpectedly after I did what you said.
oh wow Wauwww.. excellent
You're the best. MASTER.
.....
I'm grateful to you, maestro.
*************
Then I waited to see how long it would stay on, I mean I surfed the net and it was on for long hours.
When I turned off the computer and turned it back on, unfortunately it lost 6GHz again.

I was happy for a little while. ))
It's a really gratifying achievement. So it will work.
what else can be done?
I can't get into the router “telnet”. i can't find the password after admin in case there is something there that needs to be changed. i tried many variants but; Tenda Rx27 pro
root / Fireitup /admin / 12345678 / 01234567890 / 123456 /admin123456789
You can even change the region easily with “RouterCfm.cfg” in the backup. of course with the list of countries that accept 6 GHz.
“BR” on the router already works as Brazil, 242 comes with adjustment

but after adjusting the settings on the PC we realized that the router was working with 6GHz after all, right?
I have tried the region with other countries and encodings other than “us” and still the pc does not see it. Since I don't know the exact codes for “US” I tried with what I found on the internet but finally I left it back in the original “BR”.

(I have tried the region with other countries and encodings other than “us” and still the pc does not see it. Since I don't know the exact codes for “US” I tried with what I found on the internet but finally I left it back in the original “BR”. )

US
wlan0_countrycode=US , wlan1_countrycode=US , wlan2_countrycode=US ,
wlan0_countryrev=? wlan1_countryrev=? wlan2_countryrev=?
previously failed codes tried on the router;
310 US /311 / 312 / 313 / 313 /314 / 315 /316 / 0

Countries that can run 6GHz smoothly
724 BR Brazil , 262 DE Germany, 242 NO Norway, 385 HR Croatia , ??? US America

) ChatGPT HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WlanSvc\Parameters\HostedNetworkSettings
6GhzBand dword32 1 suggested I add ))) I did that but still no 6GHz.
Region ( US) America on PC...
What else can be done on the PC?

Is it not possible to modify the “intel ant tool” tool that I shared with you? ax210 works without any problem with ant tool without making any changes on the computer. it will be perfect if we can set it in the same way for be200.
(ant tool : If there is a possibility to remove the 2 hour limit completely or to increase it to a maximum of ?? hours, that would be great.

I will look into it and come back to you with a solution I'm trying my best to find a way to 100% fix your case Thank you for your kind words , I can't thank you enough for those nice words ! I'm just a simple guy who loves to tinker with stuff I'm always happy to help

i tried reinstall multiple times already and it still didn't work
are there any requirements for the Smart AP feature that i dont meet?

There's no requirements for Smart AP feature, can you check this service is started & running? You can look at it through Task manager... if it is not running, right-click on it and press "Start" and check the Killer app. Here's a picture as an example

Hello,

The issue still persists Code 10 sadly. In the registry editor I noticed the adapter model was AX411, even tho in device manager, it was AX211. Do you have any recommendations to fix these issues ?

View attachment 370048
View attachment 370049
This device cannot start. (Code 10) ^^

Insufficient system resources exist to complete the API.

Will provide you another fix for it.

AdapterModel registry key is just to show you & tell you that you are using AX411 optimization settings on AX211

i tried reinstall multiple times already and it still didn't work
are there any requirements for the Smart AP feature that i dont meet?
P/S: the killer smart ap services is not working on my device "Error 1068: The dependency service or group failed to start"
Another P/S : according to Intel, to use Double Connect feature we need the Killer Wireless Performance Suite, unfortunately i cant install even with modded driver

Use those lines... copy & past it into a notepad and then save it as setup.bat and then replace it on the same Killer Installer folder. Run it but make sure to right-click on it and select "Run as admin" for it to work

cd /d %~dp0
echo Installing Root Authority Certificate...
certutil -f -addstore "Root" "Certs\drivecert.cer"
echo Done!
echo Installing CA Authority Certificate...
certutil -f -addstore "CA" "Certs\drivecert.cer"
echo Done!
echo Installing Publisher Certificate...
certutil -f -addstore "TrustedPublisher" "Certs\drivecert.cer"
echo Done!
echo Make sure you are using Intel WiFi modded driver or might appear to be working while actually it is not working!
echo Installing Intel(R) Ultra Killer(R) Software Component
pnputil /add-driver "Driver\KillerNetworkExtension.inf" /install
pnputil /add-driver "Driver\KillerNetworkComponent.inf" /install
echo Applying registry fix for Smart AP.
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v FirstRun /t REG_DWORD /d 0 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v Run_APSuggestionService /t REG_DWORD /d 1 /f
echo Re-Applying registry fix again for Smart AP to prevent override by Intel checking mechanism.
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v FirstRun /t REG_DWORD /d 0 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v Run_APSuggestionService /t REG_DWORD /d 1 /f
echo Starting Smart AP services
powershell.exe Start-Service -Name "KAPSService"

pause

THEBOSS619 (Maestro/Master). Something caught my attention.
I drew my attention in your “Netwtw10.sys” review why I said be200 for “NETwaw16.sys” did not review our product after all wifi 7 .
Netwtw10.sys =ax=wifi6e
NETwaw16.sys=be=wifi7

well “NETwaw16.sys” still advertises the be200 hardware as “Typhoon” when I want to look at the content, even though it is not like you. i am very surprised that the product is still wifi 6e...
wifi 7 is not released.
which intel also stated on its own site that it still works with wifi6e features for be200.

intel ant tool, before running cmd “HwDetection.xml” in “HwDetection.xml” in (be200) “gale” or “gale2” or linux users see the name “GaP2”; I'm not sure what name it is, “intel community” is in someone's share;
ANT tool, Version ANT.01908.23.70.0
(C) 2007-2024 Intel corporation / OEM Tools group. All rights reserved.

Detected hardware: Device Identified by crf_id: 0x0f
SetDeviceFromString: GALE
Intel(R) Wi-Fi 7 BE200 320MHz

RF-Kill is Disabled (RF is ON)
ERROR: -ant_isolation is not supported for this HW...
When you shared the information ****************, it caught my attention;

HwDetection.xml“ in ‘<Device name=’TYPHOON” crf_id=“0x02” rf_type=“0x010D” parameter (wifi 6e ax210)

anyway if this “NETwaw16.sys” detects “TYPHOON”; then
“Device name=“TYPHOON” crf_id=“0x0f” rf_type="0x010D”
“C:\ANT>ANT.exe -QueryMCC

ANT tool, Version 22.2000.0.0-05160

(C) 2007-2020 Intel company / OEM Tools group. All rights reserved.

Detected hardware: Intel(R) Wi-Fi 7 BE200 320MHz

Error: The read command fails with the following condition: , 256 (starting to find “error.”.

(802.11ac (Wi-Fi 5): 0x0108 (Thunder ac9260 /Jefferson - ac9460, 9461
802.11ax (Wi-Fi 6): 0x010C, 0x010A, 0x010D (Typhoon - ax210, ax1675, Garfield -ax211, ax411, ax1690
802.11be (Wi-Fi 7): x0F08 (Gale Peak) 2))

Intel® Wi-Fi 7 BE200 (Gale Peak 2) : crf_id=0x0f
Intel® Wi-Fi 7 BE201 (Fillmore Peak 2): crf_id=0x10
Intel® Wi-Fi 7 BE202 (Misty Peak 2): crf_id=0x11


<Device name="Fillmore2" crf_id="0x10" rf_type="0x0F08" /> mac_type=? specific value
<Device name="Misty2" crf_id="0x11" rf_type="0x0F08" /> mac_type=? specific value
<Device name="Gale" crf_id="0x0F" rf_type="0x0F08" /> mac_type=? specific value

Could it be a 256 error due to not being able to find the “mac” address as a result?
<MAC name="TYPHOON" mac_type="0x0042"
(Gale Peak 2) mac_type= ???

just my observations. brainstorming without “going crazy” without understanding )))

SetDeviceFromString: GALE "where does intel query this parameter?"

crazy questions and fantasies in my head ) (reverseengineering)
make it look like ax210 again without losing be200 drive wifi 7 features ))) what do you say boss (THEBOSS619)

the main problem is mac_type missing, I will look deep into the ant tool and .sys. The NETwaw16 vs Netwtw10 share similar registry keys and even the same name keys I will work around them and try if I can find anything else for it Thank you for your time and sharing your results!

@SPTS_account can you give this one a try? download from the attachment of this comment... hopefully it works now for you Sorry for causing any inconveniences for you
Also @hoffer39 I made adjustments for your HWID, fingers crossed Sorry for causing any inconveniences for you

 

[hoffer39]

Also @hoffer39 I made adjustments for your HWID, fingers crossed Sorry for causing any inconveniences for you

It's sad, but I get same error with "Code 39" and "object name not found" descriptions. If it's important I use 24h2 build 26100.1742, Defender is removed and UAC is off. I don't know what to think. May be driver needs some resources from other programs and software that does not installed on my pc, but it's strange. Drivers should work without anything and it does when I install factory drivers. Thank you for messing with me and wasting your precious time on me. That is very noble of you! You are awesome man! I am glad that everything works fine for other forum members!

 

[SPTS_account]

I will provide you a customized setup.bat later on you are the second person who have problems with elevation

I will look into it and come back to you with a solution I'm trying my best to find a way to 100% fix your case Thank you for your kind words , I can't thank you enough for those nice words ! I'm just a simple guy who loves to tinker with stuff I'm always happy to help


There's no requirements for Smart AP feature, can you check this service is started & running? You can look at it through Task manager... if it is not running, right-click on it and press "Start" and check the Killer app. Here's a picture as an example
View attachment 370102


Will provide you another fix for it.

AdapterModel registry key is just to show you & tell you that you are using AX411 optimization settings on AX211


Use those lines... copy & past it into a notepad and then save it as setup.bat and then replace it on the same Killer Installer folder. Run it but make sure to right-click on it and select "Run as admin" for it to work

cd /d %~dp0
echo Installing Root Authority Certificate...
certutil -f -addstore "Root" "Certs\drivecert.cer"
echo Done!
echo Installing CA Authority Certificate...
certutil -f -addstore "CA" "Certs\drivecert.cer"
echo Done!
echo Installing Publisher Certificate...
certutil -f -addstore "TrustedPublisher" "Certs\drivecert.cer"
echo Done!
echo Make sure you are using Intel WiFi modded driver or might appear to be working while actually it is not working!
echo Installing Intel(R) Ultra Killer(R) Software Component
pnputil /add-driver "Driver\KillerNetworkExtension.inf" /install
pnputil /add-driver "Driver\KillerNetworkComponent.inf" /install
echo Applying registry fix for Smart AP.
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v FirstRun /t REG_DWORD /d 0 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v Run_APSuggestionService /t REG_DWORD /d 1 /f
echo Re-Applying registry fix again for Smart AP to prevent override by Intel checking mechanism.
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v FirstRun /t REG_DWORD /d 0 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Killer Network Service\ServiceCFG" /v Run_APSuggestionService /t REG_DWORD /d 1 /f
echo Starting Smart AP services
powershell.exe Start-Service -Name "KAPSService"

pause

the main problem is mac_type missing, I will look deep into the ant tool and .sys. The NETwaw16 vs Netwtw10 share similar registry keys and even the same name keys I will work around them and try if I can find anything else for it Thank you for your time and sharing your results!

@SPTS_account can you give this one a try? download from the attachment of this comment... hopefully it works now for you Sorry for causing any inconveniences for you
Also @hoffer39 I made adjustments for your HWID, fingers crossed Sorry for causing any inconveniences for you

Hi theboss619, sadly it still doesnt work with the same issues. Code 45 now.

I think i might be downloading them wrong? Or something

I think these could be the same setup.bat ones that i've previously uninstalled or something i'm not sure since it is under the same name. Either way I hope you can find a solution to this

 

[THEBOSS619]

It's sad, but I get same error with "Code 39" and "object name not found" descriptions. If it's important I use 24h2 build 26100.1742, Defender is removed and UAC is off. I don't know what to think. May be driver needs some resources from other programs and software that does not installed on my pc, but it's strange. Drivers should work without anything and it does when I install factory drivers. Thank you for messing with me and wasting your precious time on me. That is very noble of you! You are awesome man! I am glad that everything works fine for other forum members!

Hi theboss619, sadly it still doesnt work with the same issues. Code 45 now.
View attachment 370185

I think i might be downloading them wrong? Or something

View attachment 370186
I think these could be the same setup.bat ones that i've previously uninstalled or something i'm not sure since it is under the same name. Either way I hope you can find a solution to this

Oh damn it! I will double check the HWID and it's related contents, There's definitely something I am keep missing here

I'm always happy trying to help whenever I can if you have the time... could you try to find which previous modded driver version that actually works for you? There's definitely something I missing here but I can't see it or I'm too blind for staring at the screen for too long

 

[SPTS_account]

haha its ok. i can't find the previous driver sorry

 

[THEBOSS619]

haha its ok. i can't find the previous driver sorry

I'm working on it, will get back to you for with another one

 

[SPTS_account]

I'm working on it, will get back to you for with another one

Alright

 

[awkh1982]

Hi, is Double Connect support Killer AX1675X? i didn't see it at properties