Testing max ram overclock pn Ryzen 1700

[Cowboystrekk]

Dropped clock speed to 3600mhz. I had a blue screen from some issue with nvidia drivers and I feel like that could be from an unstable imc at 3666mhz but also I might have corrupted my gpu driver prior trying to get 3733mhz to run when that was way more unstable. Edit: What I do not understand is how could I pass occt for 10 minutes. I understand that its 10 minutes but whenever I had something unstable it would give me an error in occt before a minute into the benchmark.


I take that back. It was just the gpu driver being buggy causing the crash. After reinstalling the driver and running occt for 1 hour with mem at 3666mhz. I got no crashes and errors


I don't know if this is stable. Instead of windows blue screening occt crashed instead
View attachment 386509

Try a bit higher soc.

 

[FamousFighter]

Try a bit higher soc.

I'm already at 1.150vsoc. Isn't that the highest you can go for daily? I would rather not do 1.2vsoc

 

[Cowboystrekk]

I'm already at 1.150vsoc. Isn't that the highest you can go for daily? I would rather not do 1.2vsoc

You zentimings says 1.09v soc.

 

[FamousFighter]

You zentimings says 1.09v soc.

The bios I have it set to 1.150. I think it might be possible to get 14-15-15-15-29-44. I have it set to 1.48v with tRFC at 320. Going to test but I feel like it might be possible to get this stable

You zentimings says 1.09v soc.

Uninstalled valorant and vanguard and still shows 1.09vsoc. Not sure why but it does. I dont know any other program that can show vsoc. This isnt stable (errors in occt ram stability) but it boots and things don't seem to crash at least. 1.48v for dram. 1.5v gives errors so fast.

 

[Cowboystrekk]

The bios I have it set to 1.150. I think it might be possible to get 14-15-15-15-29-44. I have it set to 1.48v with tRFC at 320. Going to test but I feel like it might be possible to get this stable


Uninstalled valorant and vanguard and still shows 1.09vsoc. Not sure why but it does. I dont know any other program that can show vsoc. This isnt stable (errors in occt ram stability) but it boots and things don't seem to crash at least. 1.48v for dram. 1.5v gives errors so fast.
View attachment 386712

Your ram probably overheats, B-die is very tempsensitive.

 

[FamousFighter]

Your ram probably overheats, B-die is very tempsensitive.

I changed vddrsc soc (I think that is what its called) to 1.150. For some reason it was in a fixed mod of 1.1v. Not sure why and was using that instead of the vsoc voltage I inputted in the main oc tweaker page. I believe at 1.150 it might be stable to do 3733 but 3800 is out of the question. Unfortunate I can't even post with 3800. For the ram kit so I just need to janky up a fan or get a ram fan then that may be a solution to my problems?

 

[Cowboystrekk]

I changed vddrsc soc (I think that is what its called) to 1.150. For some reason it was in a fixed mod of 1.1v. Not sure why and was using that instead of the vsoc voltage I inputted in the main oc tweaker page. I believe at 1.150 it might be stable to do 3733 but 3800 is out of the question. Unfortunate I can't even post with 3800. For the ram kit so I just need to janky up a fan or get a ram fan then that may be a solution to my problems?

Stick with 3666 or 3733 then

 

[FamousFighter]

Stick with 3666 or 3733 then

I am done tuning this kit. I did the same timings at 3666mhz and it made windows blue screen then it didnt post. I am going to do 3600mhz because that is safe and from there I will go back to old timings. This kit feels like a gamble where it doesnt work and then it does. I need a ram fan or some way to cool it and I dont have a way to fit that in my pc right now. Regardless, thank you for the help and if you really would like to help me further then I would prefer a 1 on 1 conversation if you don't mind. I would rather not to continue using this thread/forum

 

[Cowboystrekk]

I am done tuning this kit. I did the same timings at 3666mhz and it made windows blue screen then it didnt post. I am going to do 3600mhz because that is safe and from there I will go back to old timings. This kit feels like a gamble where it doesnt work and then it does. I need a ram fan or some way to cool it and I dont have a way to fit that in my pc right now. Regardless, thank you for the help and if you really would like to help me further then I would prefer a 1 on 1 conversation if you don't mind. I would rather not to continue using this thread/forum

Just send me an PM Most importantvwith B-die is to get your rfc as low as possible. Use testmem5 usmus1 for ram stability testing.