Reports of Bricked NVIDIA GeForce RTX 5090 and RTX 5090D Surge

[Caring1]

I dont have sure about the PSU but HX1000watts should not be enought!?

about the cpu maybe, and motherboard be old cannot be also the problem?

Manually set the PCI-e version in the Bios to 3 or 4, not Automatic.

 

[smereces]

Manually set the PCI-e version in the Bios to 3 or 4, not Automatic.

The board only have pci-e 2 and 3 I already set manually to 3 but still not solve it

 

[smereces]

PSU is fine. But yes, since X399 was made for Threadrippers, that may not be supported either. If the chipset lacks proper support, any number of things attached to it can malfunction.

Normally, I would say "boot Linux from a bootable stick", that will tell you if it's a hardware or a software problem. But Linux (from a stick) wouldn't load the proper driver for the video card, so not much help in this case, I'm afraid.

I can’t have sure but I’m point also to the motherboard and cpu compatibility issues and also not be supported in win 11 maybe also can be the problem!