2 vs 4 ram sticks

[gasolin]

Never mentioned anything about 4x4000mhz

Im already having trouble finding 2x32gb 3600mhz cl16 for not alot of money (200 euros is to much)

 

[ShrimpBrime]

2 and 4 ram sticks. are usually dual rank

I just wanna know if it makes a difference instead of having to buy ram, memory and try it for myself, because most video with ryzen say yes but some combinations it doesn't make a difference higher then 1-2 fps (fare from 10% like some videos claim)

It makes a difference with some applications. Others not so much.

7zip for example will fair better with additional ranks. So programs that read and write to the memory over a larger number of threads will perform better with additional ranks.

I would think gaming would be a fine example, but perhaps only for certain titles depending on engine utilization.

My 2 cents anyhow.

Never mentioned anything about 4x4000mhz

Im already having trouble finding 2x32gb 3600mhz cl16 for not alot of money (200 euros is to much)

Just get 3200mhz kit and clock it up.

I'd go searching for anything you can find from part numbers using B-Die finder. No sense on buying anything else concerning DDR4 unless you have to.

 

[DaemonForce]

Im already having trouble finding 2x32gb 3600mhz cl16 for not alot of money (200 euros is to much)

That is going to be a trial of the worst kind dude.

On DDR3, Mushkin was THE worst introduction and G.Skill was the best exit.
Crucial was a good enough middle that I went all in for DDR4 and chose two of the most underrated 3200 kits that can do 3800 easily.
The first kit disappeared from shelves so fast that Crucial was canceling the PO after a few hours.
You can't even find good DDR4 Crucial kits on newegg anymore and the ones that stuck around is the same case as this.
Prices quickly coming unglued from reality. Good luck.

 

[Caring1]

I'd suggest OLOy but it's Cas 18

 

[Sunny and 75]

Looks like the op has bought that 2x32GB 3200 kit.

Memory	2x32gb Corsair Vengeance LPX DDR4-3200 - CL16

 

[AMF]

I ALWAYS FOUND THAT 2 STICKS DUAL RANK IN DUAL CHANNEL IS BEST WAY TO GO

G Skill Trident Z Neo F4-3600C16-16GTZNC

 

[gasolin]

I have 64gb 3200mhz cl 16 for 134 euros

64gb 3600mhz cl16 is 167 euros but for 4 ram sticks and then the price is super close to 200 euros for 2 ram sticks of the same speed

64gb 4000mhz cl 18 that should be able to run at 3733mhz cl16 is 181 euros again 4 ram stiks

16-19-19-36 wasn't stable

Just get 3200mhz kit and clock it up.

I'd go searching for anything you can find from part numbers using B-Die finder. No sense on buying anything else concerning DDR4 unless you have to.

Don't know what to buy that can be oced so much ans stil be stable, down clock is easier and stable

 

[AMF]

I have 64gb 3200mhz cl 16 for 134 euros

64gb 3600mhz cl16 is 167 euros but for 4 ram sticks and then the price is super close to 200 euros for 2 ram sticks of the same speed

64gb 4000mhz cl 18 that should be able to run at 3733mhz cl16 is 181 euros again 4 ram stiks

16-19-19-36 wasn't stable
View attachment 353984


Don't know what to buy that can be oced so much ans stil be stable, down clock is easier and stable

G Skill Trident Z Neo F4-3600C16-16GTZNC search on amazon

 

[gasolin]

G Skill Trident Z Neo F4-3600C16-16GTZNC search on amazon

only 16gb

 

[AMF]

only 16gb

well search for same memory in 32GB sticks

 

[Sunny and 75]

I have 64gb 3200mhz cl 16

May it serve you well.

 

[ShrimpBrime]

F4-3200C16D-32GTZA would be a 32gb B-Die kit to look out for.

 

[gasolin]

i bought the usually 4000mhz cl 18 ripjaws v, they can do 3733mhz cl16 (and super cheap, despite being super cheap they are good)

 

[ShrimpBrime]

i bought the usually 4000mhz cl 18 ripjaws v, they can do 3733mhz cl16

Ah, you're at the constraints of IF I'm guessing. That kit could probably hit 4600mhz otherwise.

 

[gasolin]

 

[freeagent]

Why did you do that? Looks like ass.

 

[gasolin]

look like ass ?

 

[freeagent]

look like ass ?

Why would you spilt your IF at such a low frequency?

Edit:

In case you cannot see it, your IF is at 1600, at 1:1 that would make it 3200 MT/S. But you went lower on the mem side, you are down to 933.

1866 1:1 is 3733.

 

[gasolin]

im confused not so much about the if but im running single ram wtf my 2x32gb kit where dual rank ram

i will look into that, no idea why they don't run 1:! it's infinity fabric right ?

 

[izy]

You will see less benefit on x3D chips in general , 4x4 and 2x2 DR should be a bit faster in some games/applications if you compare with 2x2 SR at the same speed etc.. but you will mostly see the benefit on normal CPUs not on x3D, i would prefer running 2x2 DR.

 

[gasolin]

Still single rank, another pair of ram would give me more perfomance ?

L3 cache results looks strange

 

[izy]

Still single rank, another pair of ram would give me more perfomance ?

View attachment 354144

It will give you a bit if you can run them at the same speed and timmings but i dont think you will notice it in most cases if you have an x3D chip

 

[Sunny and 75]

im confused not so much about the if but im running single ram wtf my 2x32gb kit where dual rank ram

Another kit already!

Memory	G.Skill Ripjaws V DDR4-4000 - 32GB - CL18

That 2x16GB 3600 CL16 Corsair kit was/is already optimized/the sweet spot for ZEN3/X3D.

The other one, the 2x32GB 3200 CL16 kit is also a good choice.

 

[A Computer Guy]

Don't load up 4 DIMMs unless you like spending time in the bios tweaking voltages to get it stable Neither AMD or Intel is good with 4 DIMMs unless you run a much lower speed.

I had a survey along these lines awhile back although it was more geared to reaching the maximum capacity for AM4/Zen3. I got lucky running 128GB at DDR4-3200 with relatively low voltages to boot.

 

[gasolin]

It will give you a bit if you can run them at the same speed and timmings but i dont think you will notice it in most cases if you have an x3D chip

I do have a X3D chip

What are we talking about in performance gain ? worth taking the chance of another kit running at 3733mhz cl 16 ?

The ripjaws v are single rank ram, so that's why they are cheaper than most ram,memorys ?

Another kit already!

Memory	G.Skill Ripjaws V DDR4-4000 - 32GB - CL18

That 2x16GB 3600 CL16 Corsair kit was/is already optimized/the sweet spot for ZEN3/X3D.

The other one, the 2x32GB 3200 CL16 kit is also a good choice.

I never had a X3d so im a noob regarding ram,memory for that cpu

I only have the g skill ram, delivery doesn't take long when the ram is stock, order ram 10 o'clock or just a little earlier in the afternoon an you have it less than 12 hours later today it was before 10 o'clock in the morning