• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

ARCTIC Identifies Bad Batch of MX-5 TIM in the Market, Offers Free Replacements

So I thought I would show whats what with a before and after worth noting the load is world community grid at 60% not 100% and there is less than a minute between pics the first was at a cool ambient of 19 after being idle 10 mins.
the second is after a 15 seconds of load.

PXL_20220120_144914617.MP.jpg
PXL_20220120_145040843.jpg
 
maxfly said:
They want you to ship it on your dime?
Then replace it with mx-4?
Mmmmnah. That is unacceptable.
Click to expand...
Yes cost is on the user. MX-4 offered at double the grammage. Unacceptable i concur.
 
I expected far better of them. Arctic has done alot over the years to solidify their brand as one of the best. This response is pretty much the opposite of what I expected. I assumed they would confirm the bad tube, send a shipping label. Then obviously send a replacement tube of mx-5. Their approach makes no sense.
 
iuliug said:
Artic support said it will replaced with mx-4 (at double the grams) and requires mx-5 be sent at the cost of user.
Click to expand...
I'm not buying that statement. Citation required. Let's see a link to where they said this publicly or a screen shot of an email they sent you. Otherwise I call BS on your comment.
 
Here is the official statement about the issue with MX-5 paste: PR | ARCTIC MX-5 paste

I've also contacted them today. I'm curious to see if they will going to replace it with an MX-5 or MX-4.

I'm using the MX-5 on an i9-12900k and I've observed in 2 months of use my temps got higher with ~5C . I thought that it's the motherboard manufacturer as I've upgraded my BIOS 7 x times in the last month - new platform (Z690) and a lot of new BIOS updates has been released.

Next week I'm building my 2nd rig with an i7-12700k and hopefully I will get the new (good) paste till then.

I'm a fan of their products and I own 2 x Arctic LF II - 1 x 420mm and 1 x 360mm
 
I'd take the trade for double the weight in MX4, IF they paid shipping

Its a guaranteed way to get a product with no risk of quality control issues, at least... but not if you end up paying 5x the cost of the MX4 alone
 
Mussels said:
I'd take the trade for double the weight in MX4, IF they paid shipping

Its a guaranteed way to get a product with no risk of quality control issues, at least... but not if you end up paying 5x the cost of the MX4 alone
Click to expand...
I should be able to photo the batch number and a receipt and they send me it and ditch the return, shit is shit and they're aware it was shit already without further examples.
 
For reference, I Personally had a defective hard and oily mx-5 tube. I contacted arctic support, and they asked for a photo of the thermal paste squeezed onto a white paper to prove oil speration, so I sent them a photo and a short video. They approved the replacement, without asking for the tube to be shipped to them. They also asked for a proof of purchase. In the end they sent me a 20g mx4 tube as a replacement to my 8g mx5.

MX-5 also seems to be discontinued by arctic. Its not on available for purchase from their website and it's listed as an end of life product, which probably explains them giving out mx4 as a replacement rather than mx5.
 
Catbathat said:
For reference, I Personally had a defective hard and oily mx-5 tube. I contacted arctic support, and they asked for a photo of the thermal paste squeezed onto a white paper to prove oil speration, so I sent them a photo and a short video. They approved the replacement, without asking for the tube to be shipped to them. They also asked for a proof of purchase. In the end they sent me a 20g mx4 tube as a replacement to my 8g mx5.

MX-5 also seems to be discontinued by arctic. Its not on available for purchase from their website and it's listed as an end of life product, which probably explains them giving out mx4 as a replacement rather than mx5.
Click to expand...
Yeah it's EOL'd, we have some other threads discussing it (although they're kinda... messy. some people really really loved their MX5)
 
From my discussions with them (i ended up not asking for replacement due to the fact that i did not want MX4 and their poor communication and support) they never acknowledged that they EoLed MX5/ hence my annoyance with then that they did mot provide MX5 replacements,.
 
You must log in or register to reply here.
Back
Top