My RX6800XT is not giving image anymore, Please Help.

[Crstxn]

What kind of partying is going on with you and your friends, slinging thermal grease everywhere?

It was a new motherboard? Was there grease in the old one too?

Funny.

 

[DirtyDingusMcgee]

My dad's PC gave me a message saying that the vga UEFI is not compatible with the PC or something like that, idk probably my dad's PC is not compatible with my gpu

Need to try in a more modern system. Did this message display on the monitor while it was hooked up to your gpu video out? Even if that is all it displayed, that tells you that the video out is working.

 

[Crstxn]

Need to try in a more modern system. Did this message display on the monitor while it was hooked up to your gpu video out? Even if that is all it displayed, that tells you that the video out is working.

The message appeared without my GPU being hooked up to my dad's PC, my dad's PC only uses igpu so I connected the HDMI to the mobo and the megatrends vga card is not supported by UEFI Driver appeared, so I still don't know if my GPU is faulty or not.

 

[DirtyDingusMcgee]

one more try......

To test your gpu, you inserted your gpu into your father computer, correct?

you tried the video output on you gpu or you did not while the gpu was inserted into your father's computer?

 

[Crstxn]

one more try......

To test your gpu, you inserted your gpu into your father computer, correct?

you tried the video output on you gpu or you did not?

Well, of course I tried, that was the point of putting my GPU into my father's pc, and yeah no image just black screen .

 

[DirtyDingusMcgee]

The message appeared without my GPU being hooked up to my dad's PC, my dad's PC only uses igpu so I connected the HDMI to the mobo and the megatrends vga card is not supported by UEFI Driver appeared, so I still don't know if my GPU is faulty or not.

You were not very clear.

 

[Crstxn]

You were not very clear.

Sorry if i was not clear

 

[dartuil]

Time to get a 9070

 

[Dr. Dro]

My dad's PC gave me a message saying that the vga UEFI is not compatible with the PC or something like that, idk probably my dad's PC is not compatible with my gpu

That's a a good sign, your card is at least alive enough to work in text mode. No need to tear the whole thing apart and breadboard it. From the pictures you have provided, it looks like the slot on your motherboard is very dirty. Those debris will cause issues. I recommend against using a Q-tip to clean it, it's only going to make it worse. Buy a can of contact cleaner spray from Amazon or other electronics shops to cleanse it, and your graphics card is probably going to work. While at it, buy a can of DeoxIt to clean the GPU's contacts. Use both very sparingly and then wipe with an ESD safe cloth. If you don't have one handy, Amazon should have it, too.

 

[Crstxn]

That's a a good sign, your card is at least alive enough to work in text mode. No need to tear the whole thing apart and breadboard it. From the pictures you have provided, it looks like the slot on your motherboard is very dirty. Those debris will cause issues. I recommend against using a Q-tip to clean it, it's only going to make it worse. Buy a can of contact cleaner spray from Amazon or other electronics shops to cleanse it, and your graphics card is probably going to work. While at it, buy a can of DeoxIt to clean the GPU's contacts. Use both very sparingly and then wipe with an ESD safe cloth. If you don't have one handy, Amazon should have it, too.

I'll try that, thanks

 

[ShrimpBrime]

I'll try that, thanks

Which LED does the board get stuck on when you turn it on? The diagnostic LEDs should help point in the right direction. Also, you can use the FP header and install the little diagnostic speaker which will give error beeps where you can help figure out which piece of hardware isn't working during post. Not sure where the speaker goes, DL the manual.

B650 EAGLE AX Support | Motherboard - GIGABYTE Global

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

 

[eidairaman1]

I think northwestrepair said that. I have heard that quote before but not entirely sure who said it originally.

That guys a crybaby

Time to get a 9070

Depends on if its cheaper to repair the 6800, which is not a slouch.

I cant remember what that YouTube GPU repair guy said..

AMD makes good boards, shit cores, Nvidia makes shit boards and good cores?

Something like that.

Lots of stories just like this one on the internet.

It was user damage

 

[Crstxn]

Which LED does the board get stuck on when you turn it on? The diagnostic LEDs should help point in the right direction. Also, you can use the FP header and install the little diagnostic speaker which will give error beeps where you can help figure out which piece of hardware isn't working during post. Not sure where the speaker goes, DL the manual.

B650 EAGLE AX Support | Motherboard - GIGABYTE Global

Lasting Quality from GIGABYTE.GIGABYTE Ultra Durable™ motherboards bring together a unique blend of features and technologies that offer users the absolute ...

www.gigabyte.com

I managed to get the GPU working but it only gives me image using the silent bios mode of the GPU, if I use the oc mode it will not give image and stay on the red light og not vga or not display source

 

[eidairaman1]

I managed to get the GPU working but it only gives me image using the silent bios mode of the GPU, if I use the oc mode it will not give image and stay on the red light og not vga or not display source

That means a bios flash get a Screenshot of GPU-Z with the Silent bios, then Get on the Advanced Tab and Click on the Word General then select AMD Bios on it please, screenshot it.

 

[Crstxn]

That means a bios flash get a Screenshot of GPU-Z with the Silent bios, then Get on the Advanced Tab and Click on the Word General then select AMD Bios on it please, screenshot it.

This is with the silent bios switch.

 

[eidairaman1]

This is with the silent bios switch.

Pkease screenshot the General tab

 

[Crstxn]

Pkease screenshot the General tab

Wait me some minutes, I'm out of my house rn I'll be back soon

Pkease screenshot the General tab

Silent mode general tab

Pkease screenshot the General tab

My screen went black again and I was doing nothing, only brave browser was active, now I'm trying to boot my PC and it stays on the VGA Red light again F*CK. Both bios modes are not working again so I'm back at the beginning of this problem...

Pkease screenshot the General tab

im using the computer with the igpu now i can still see the info of my gpu with gpu z, what should i do?

 

[eidairaman1]

Wait me some minutes, I'm out of my house rn I'll be back soon


Silent mode general tab View attachment 388408


My screen went black again and I was doing nothing, only brave browser was active, now I'm trying to boot my PC and it stays on the VGA Red light again F*CK. Both bios modes are not working again so I'm back at the beginning of this problem...


im using the computer with the igpu now i can still see the info of my gpu with gpu z, what should i do?

Yes you can go into gpu-z and select the device you want info shown about. Sorry I meant Graphic Card Tab

 

[Crstxn]

Yes you can go into gpu-z and select the device you want info shown about

Yep

 

[eidairaman1]

Yep

What i meant was Graphic Card Tab so I can see device ID and subststem ID, make sure it is on silent bios please

 

[Crstxn]

Yes you can go into gpu-z and select the device you want info shown about. Sorry I meant Graphic Card Tab

this?

What i meant was Graphic Card Tab so I can see device ID and subststem ID, make sure it is on silent bios please

yeah card is on the silent switch but im using the image of my igpu

 

[eidairaman1]

this?


yeah card is on the silent switch but im using the image of my igpu

Ok so can you have monitor hooked up to the card directly with the silent bios?

 

[Crstxn]

Ok so can you have monitor hooked up to the card directly with the silent bios?

No bro like I said I was browsing on brave and suddenly my screen became black, I restarted the PC but now I have an eternal black screen while on the silent switch as well so I can't use my graphics card, I'm using the image of my cpu integrated graphics.

 

[eidairaman1]

No bro like I said I was browsing on brave and suddenly my screen became black, I restarted the PC but now I have an eternal black screen while on the silent switch as well so I can't use my graphics card, I'm using the image of my cpu integrated graphics.

Ok

 

[Crstxn]

Ok

So there is no way to fix?

Ok

Card seems to be getting enough power but still no image, I checked the psu cables but everything looks fine.