OCing my Ram

Taraquin · Jul 8, 2022

Blaeza said:
That's what the TestMem above is from, after I put in all your values. Not sure if I should do any ocing though as I've been drinking and that enables Mr punch the fuck out of shit when it goes wrong. Ah, fuck it lets go!

Which RFC mate, there are a few! 1 2 4 or wut. Like I said I've had a few. Confusion at this point would be very bad!

Just change no 1, 2 and 4 is not active.

Blaeza · Jul 8, 2022

Okay will try that now.

Well, thats 800!

700, but I'll leave it at that, not going to push my luck for one night.

Taraquin · Jul 8, 2022

Blaeza said:
Okay will try that now.

Well, thats 800!

700, but I'll leave it at that, not going to push my luck for one night.

Okay, 600 may work, but 700 is much better than 1050.

Blaeza · Jul 8, 2022

Yes it is! Can't say I can feel the difference but I can see it on benchmarks. Thank you yet again for your help. I might get brave tomorrow and try 600/540. Now, it's cod time!

DoLlyBirD · Jul 8, 2022

You can safely run those if they are actually B-die at 1.5-1.55v without worrying, 1.35/1.4-1.45v is not even breaking a sweat for B-die, what are your current timings at 3800? What's your SOC voltage at also?

Blaeza · Jul 8, 2022

SOC is 1.10. What makes you ask Mr Bird?

Taraquin · Jul 8, 2022

DoLlyBirD said:
You can safely run those if they are actually B-die at 1.5-1.55v without worrying, 1.35/1.4-1.45v is not even breaking a sweat for B-die, what are your current timings at 3800? What's your SOC voltage at also?

It's possibly a bad bin Micron rev B, this is NOT Samsung B-die.

Taraquin said:
Okay, 600 may work, but 700 is much better than 1050.

560, 540 unlikely to work. If 600 fails try 650. Make RCDWR 21 aswell. I would also try RCDs and RP at 20, but that may be hard.

ir_cow · Jul 8, 2022

DoLlyBirD said:
You can safely run those if they are actually B-die at 1.5-1.55v without worrying, 1.35/1.4-1.45v is not even breaking a sweat for B-die, what are your current timings at 3800? What's your SOC voltage at also

Are talking about Micron B-Die or Samsung B-Die?

DoLlyBirD · Jul 8, 2022

ir_cow said:
Are talking about Micron B-Die or Samsung B-Die?

My bad, Sammy B-dies, can't speak for Micron, disregard if you have Micron B-die, no experience with that though SS B die RAM is the cream of the crop when it comes to DDR4

Blaeza said:
View attachment 254134

SOC is 1.10. What makes you ask Mr Bird?

you can safely go up to 1.15v SOC and it may well give you that extra bit of stability

Blaeza · Jul 8, 2022

I have micron that are a bit special, hence my timings. I've ran TestMem5 and no errors and its all good. Thank you for helping though. Going to try 7zip and see what that is saying.

eidairaman1 · Jul 9, 2022

rafik2019 said:
Why even bother ram oc rly? Put it on default and oc CPU.

I have my Ram OCd, you come here as new and say that, why?

Blaeza · Jul 9, 2022

eidairaman1 said:
I have my Ram OCd, you come here as new and say that, why?

Didn't realise how much performance you can gain?

AMF · Jul 9, 2022

2666mhz to 3800mhz

The King · Jul 9, 2022

Blaeza said:
View attachment 254134

SOC is 1.10. What makes you ask Mr Bird?

Your CDWR should also be 21 not sure why it is at 22.

RRDS/RRDL 8/6 that should be the other way 6/8
You can also try lowering both your *SCL to 4 instead of 5.

Make sure you have your current profile saved before doing any changes.

@Taraquin is that tRAS no too low should it not be 56-58?

Blaeza · Jul 9, 2022

The King said:
Your CDWR should also be 21 not sure why it is at 22.

RRDS/RRDL 8/6 that should be the other way 6/8
You can also try lowering both your *SCL to 4 instead of 5.

Make sure you have your current profile saved before doing any changes.

@Taraquin is that tRAS no too low should it not be 56-58?

My ram is poop. Baby steps first Mr King.

CDWR worked! Yay...

Taraquin · Jul 9, 2022

Blaeza said:
My ram is poop. Baby steps first Mr King.

CDWR worked! Yay...

View attachment 254189

View attachment 254190

Switch RRDS and L. RDDS 6, RRDL 8. Try 600 RFC. Next I would try WR 20, RTP 10, if that works WR 16, RTP 8.

Blaeza · Jul 9, 2022

I'm going to piss off QuietBob if these work, keep getting pb's in 7 zip, lol...

I put both RRDS and L on 6. Will try 600 now.

All those timings are IN!

Taraquin · Jul 9, 2022

Blaeza said:
I'm going to piss off QuietBob if these work, keep getting pb's in 7 zip, lol...

I put both RRDS and L on 6. Will try 600 now.

All those timings are IN!

View attachment 254203

Excellent, next you can try RFC 560, WRTS 4, WTRL 12. After that you can fine tune some timings, but most of the gains are realised.

Blaeza · Jul 9, 2022

Now I'm going for 10 12 12 12 30... :roll:

Going to Testmem5 it first. You lot need to think of yourselves as teachers! If it weren't for you all I'd still be punching radiators. :banghead:

RFC 560 made me fetch the screwdriver

Taraquin · Jul 9, 2022

Blaeza said:
Now I'm going for 10 12 12 12 30...

Going to Testmem5 it first. You lot need to think of yourselves as teachers! If it weren't for you all I'd still be punching radiators.

RFC 560 made me fetch the screwdriver

try 580, if no-go then stick with 600. And save bios after best stable setting.

Blaeza · Jul 15, 2022

So I thought I'd keep a stupid question in my own thread, but where can you see the temperatures of your ram?

So I've made some progress...

Memory voltage is at 1.450V

And I changed the first timing to 16, which did this

The King · Jul 16, 2022

Taraquin said:
Excellent, next you can try RFC 560, WRTS 4, WTRL 12. After that you can fine tune some timings, but most of the gains are realised.

@Blaeza Have you tried?

WRTS 4
WTRL 12

3800 CL16 seems not possible even at 1.45V.

If the above settings pass Tm5 then try changing

RRDS 4.

Changing subtimings can make a much bigger difference than changing primary timings.

Blaeza · Jul 16, 2022

I'm here right now.

I'm going to try to do the RRDS. One sec.

Running Testmem5

All good anything else I can try?

The King said:
@Blaeza Have you tried?

WRTS 4
WTRL 12

3800 CL16 seems not possible even at 1.45V.

If the above settings pass Tm5 then try changing

RRDS 4.

Changing subtimings can make a much bigger difference than changing primary timings.

What's next?

The King · Jul 16, 2022

Since heat is not an issue at 1.4V

Have you tried?

TWR 16
RTP 8

Dont forget to save last profile. You may need the screwdriver. :laugh:

Blaeza · Jul 16, 2022

The King said:
Since heat is not an issue at 1.4V

Have you tried?

TWR 16
RTP 8

Dont forget to save last profile. You may need the screwdriver.

No but I'm going to. The screwdriver is ready :rockout:

Profile saving is LIFE... Can't forget that.

TWR 16
Now for RTP

The King said:
Since heat is not an issue at 1.4V

Have you tried?

TWR 16
RTP 8

Dont forget to save last profile. You may need the screwdriver.

All good Mr King! MORE, I need MORE HAHAHAHAHA. Sorry went a bit dotty then.

Processor	7800X3D 2x16GB CO
Motherboard	Asrock B650m HDV
Cooling	Peerless Assassin SE
Memory	2x16GB DR A-die@6000c30 tuned
Video Card(s)	Asus 4070 dual OC 2610@915mv
Storage	WD blue 1TB nvme
Display(s)	Lenovo G24-10 144Hz
Case	Corsair D4000 Airflow
Power Supply	EVGA GQ 650W
Software	Windows 10 home 64
Benchmark Scores	Superposition 8k 5267 Aida64 58.5ns

System Name	My 2nd new build
Processor	Ryzen 7 7800X3D
Motherboard	X670E MSI Tomahawk WiFi
Cooling	Thermalright Peerless Assassin 120 ARGB
Memory	G-Skill Trident Z Neo RGB 6000 CL30 32GB
Video Card(s)	Powercolor 7900 GRE Red Devil
Storage	Samsung 870 QVO 1TB x 2, Lexar 256 GB, TeamGroup MP44L 2TB, Crucial T700 1TB
Display(s)	32" LG GN600-B
Case	Montech 903 MAX AIR
Audio Device(s)	Corsair void wireless/Razer Kraken
Power Supply	MSI MPG AGF 850 watt gold
Mouse	Glorious Model D l Pad GameSir G7 SE
Keyboard	Redragon Vara K551P
Software	Windows 11 Pro
Benchmark Scores	Lets get my GPU working first...

Processor	7800X3D 2x16GB CO
Motherboard	Asrock B650m HDV
Cooling	Peerless Assassin SE
Memory	2x16GB DR A-die@6000c30 tuned
Video Card(s)	Asus 4070 dual OC 2610@915mv
Storage	WD blue 1TB nvme
Display(s)	Lenovo G24-10 144Hz
Case	Corsair D4000 Airflow
Power Supply	EVGA GQ 650W
Software	Windows 10 home 64
Benchmark Scores	Superposition 8k 5267 Aida64 58.5ns

System Name	My 2nd new build
Processor	Ryzen 7 7800X3D
Motherboard	X670E MSI Tomahawk WiFi
Cooling	Thermalright Peerless Assassin 120 ARGB
Memory	G-Skill Trident Z Neo RGB 6000 CL30 32GB
Video Card(s)	Powercolor 7900 GRE Red Devil
Storage	Samsung 870 QVO 1TB x 2, Lexar 256 GB, TeamGroup MP44L 2TB, Crucial T700 1TB
Display(s)	32" LG GN600-B
Case	Montech 903 MAX AIR
Audio Device(s)	Corsair void wireless/Razer Kraken
Power Supply	MSI MPG AGF 850 watt gold
Mouse	Glorious Model D l Pad GameSir G7 SE
Keyboard	Redragon Vara K551P
Software	Windows 11 Pro
Benchmark Scores	Lets get my GPU working first...

System Name	My 2nd new build
Processor	Ryzen 7 7800X3D
Motherboard	X670E MSI Tomahawk WiFi
Cooling	Thermalright Peerless Assassin 120 ARGB
Memory	G-Skill Trident Z Neo RGB 6000 CL30 32GB
Video Card(s)	Powercolor 7900 GRE Red Devil
Storage	Samsung 870 QVO 1TB x 2, Lexar 256 GB, TeamGroup MP44L 2TB, Crucial T700 1TB
Display(s)	32" LG GN600-B
Case	Montech 903 MAX AIR
Audio Device(s)	Corsair void wireless/Razer Kraken
Power Supply	MSI MPG AGF 850 watt gold
Mouse	Glorious Model D l Pad GameSir G7 SE
Keyboard	Redragon Vara K551P
Software	Windows 11 Pro
Benchmark Scores	Lets get my GPU working first...

OCing my Ram

Taraquin

Blaeza

Taraquin

Blaeza

DoLlyBirD

Blaeza

Taraquin

ir_cow

DoLlyBirD

Blaeza

eidairaman1

The Exiled Airman

Blaeza

AMF

Attachments

The King

Blaeza

Taraquin

Blaeza

Taraquin

Blaeza

Taraquin

Blaeza

The King

Blaeza

The King

Blaeza

System Name	PCGOD
Processor	AMD FX 8350@ 5.0GHz
Motherboard	Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling	Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory	16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s)	AMD Radeon 290 Sapphire Vapor-X
Storage	Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s)	NEC Multisync LCD 1700V (Display Port Adapter)
Case	AeroCool Xpredator Evil Blue Edition
Audio Device(s)	Creative Labs Sound Blaster ZxR
Power Supply	Seasonic 1250 XM2 Series (XP3)
Mouse	Roccat Kone XTD
Keyboard	Roccat Ryos MK Pro
Software	Windows 7 Pro 64

System Name	MR T System price 2280$
Processor	Ryzen 9 3900x 325 $4.7Ghz boost pbo +50 +50 enhance - offset auto voltage -.1875 offset soc
Motherboard	ROG STRIX X570-E Gaming 125 $ open box
Cooling	280mm ARCTIC FREEZER II idle temps 25c cpu 28c cpu diode 20c vrm 25c motherboard b stock 60$
Memory	2x 16GB Dual rank G Skill Trident Z Neo F4-3600C16-16GTZNC @3800 1.395v 16-19-16-20-38-58-1T $96
Video Card(s)	Asrock RX 6950XT Oc formula Oc edition 705$ 2700 2800 boost 1090v 2376mhz mem 19GB/s
Storage	500 GB WD SN850 PCI-E 4.0x4 85$ pcie16x4
Display(s)	V505-J09 Vizio 4k HDR 299$ oc 5hz
Case	Cougar Panzer Max G Full Tower Tempered Glass 150$
Audio Device(s)	TV junk ewww
Power Supply	Seasonic SS-1250XM2 Bought in 2013 350$ 11 y/o hasnt lost any voltage or watts
Mouse	Logitech ERGO Trackball 35$
Keyboard	Corsair K57 50$
VR HMD	Dont give a damn about vr
Software	win 11 pro modded by me no ai no remote connections free hehe
Benchmark Scores	8188 multi 540 single cinebench r20

Processor	AMD R7 1700X @ 4100Mhz
Motherboard	MSI B450M MORTAR MAX (MS-7B89)
Cooling	Phanteks PH-TC14PE
Memory	Crucial Technology 16GB DR (DDR4-3600) - C9BLM:045M:E BL16G36C16U4W.M16FE1 X2 @ CL14
Video Card(s)	XFX RX480 GTR 8GB @ 1408Mhz (AMD Auto OC)
Storage	Samsung SSD 850 EVO 250GB
Display(s)	Acer KG271 1080p @ 81Hz
Power Supply	SuperFlower Leadex II 750W 80+ Gold
Keyboard	Redragon Devarajas RGB
Software	Microsoft Windows 10 (10.0) Professional 64-bit
Benchmark Scores	https://valid.x86.fr/mvvj3a