U
Unregistered
Guest
wich bios i have to use
wich bios i have to use? if i have a msi rx 9550 256 mb with fan
wich bios i have to use? if i have a msi rx 9550 256 mb with fan
-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Radeon 9550 to 9600 Bios Mod
- Thread starter W1zzard
- Start date
U
Unregistered
Guest
hi all.
im am new and i have question. maybe sum1 can help me
i want to flash my Powercolor 9550 (256Mb) to a 9600
this is what i know about my card:
eneral
Display adapter Radeon 9550 (4153)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2084
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{AD6D871A-DC8D-485A-9EB2-01F34C319585}\0000
______________________________
Clock Information
BIOS VPU 250,00
Current VPU 249,75
BIOS MEM 200,00
Current MEM 195,75
______________________________
Radeon PCI configuration space
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 10 53 41 07 00 B0 02 00 00 00 03 08 20 80 00
10 08 00 00 C0 01 A8 00 00 00 00 EF DF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
30 00 00 EC DF 58 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 02 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
______________________________
Hardware Information
Installed memory 256 Mb
Memory Type DDR SDRAM
Memory Width 128 bit
Active Rendering Pipelines 4
______________________________
ASIC details
Family 45
Emulated Revision 5
Gfx Engine ID 0
______________________________
Radeon Registers
RADEON_BIOS_0_SCRATCH 00040004
RADEON_BIOS_1_SCRATCH 0100C000
RADEON_X_MPLL_REF_FB_DIV 03251D04
RADEON_XCLK_CNTL 00A07FFA
RADEON_MCLK_CNTL 00031212
RADEON_XDLL_CNTL 0400BC30
RADEON_XPLL_CNTL 48001A00
GB_TILE_CONFIG 00010011
MC_TIMING_CNTL 1A29A323
MC_SDRAM_MODE_REG 31320032
MC_REFRESH_CNTL 00001017
______________________________
Video BIOS Information
Version 008.017D.033.00
Part Number BK-ATI VER008.017D.033.000
Date 2005/01/20 22:29
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x90
Controller 1
Active Connections:
No Active Connections
______________________________
but
1: which bios i have to use? on the bios-collection i find only this card. is that my card???.
Powercolor 9550 256 MB Apr 8th 2004 7:15 AM Jul 25th 2004 5:18 PM 250 / 200.75 unknown <--- ???
omg! which Memory have my card?
ok i have tryed to flash with this 3 bios version:
-Powercolor 9600 Non-Pro 256 MB Dec 1st 2004 10:37 PM Mar 19th 2005 5:05 PM 398.25 / 202.5
unknown
-Powercolor 9600 Pro 256 MB Oct 6th 2003 7:44 PM Apr 25th 2004 11:06 AM 398 / 203
Samsung
-Powercolor 9600 Pro 256 MB Jul 24th 2003 9:04 PM Jun 17th 2004 1:44 PM 398 / 203
Elixir
and i get allways an error "wrong SSID" Press 1 to end ?!??!
wth is a SSID? all bios i tryed dont have the right SSID. atiflash says my SSID = 2084
does not agree with the other biosversions.
HELP please what i have to do
im am new and i have question. maybe sum1 can help me
i want to flash my Powercolor 9550 (256Mb) to a 9600
this is what i know about my card:
eneral
Display adapter Radeon 9550 (4153)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2084
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{AD6D871A-DC8D-485A-9EB2-01F34C319585}\0000
______________________________
Clock Information
BIOS VPU 250,00
Current VPU 249,75
BIOS MEM 200,00
Current MEM 195,75
______________________________
Radeon PCI configuration space
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 10 53 41 07 00 B0 02 00 00 00 03 08 20 80 00
10 08 00 00 C0 01 A8 00 00 00 00 EF DF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
30 00 00 EC DF 58 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 02 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
______________________________
Hardware Information
Installed memory 256 Mb
Memory Type DDR SDRAM
Memory Width 128 bit
Active Rendering Pipelines 4
______________________________
ASIC details
Family 45
Emulated Revision 5
Gfx Engine ID 0
______________________________
Radeon Registers
RADEON_BIOS_0_SCRATCH 00040004
RADEON_BIOS_1_SCRATCH 0100C000
RADEON_X_MPLL_REF_FB_DIV 03251D04
RADEON_XCLK_CNTL 00A07FFA
RADEON_MCLK_CNTL 00031212
RADEON_XDLL_CNTL 0400BC30
RADEON_XPLL_CNTL 48001A00
GB_TILE_CONFIG 00010011
MC_TIMING_CNTL 1A29A323
MC_SDRAM_MODE_REG 31320032
MC_REFRESH_CNTL 00001017
______________________________
Video BIOS Information
Version 008.017D.033.00
Part Number BK-ATI VER008.017D.033.000
Date 2005/01/20 22:29
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x90
Controller 1
Active Connections:
No Active Connections
______________________________
but
1: which bios i have to use? on the bios-collection i find only this card. is that my card???.
Powercolor 9550 256 MB Apr 8th 2004 7:15 AM Jul 25th 2004 5:18 PM 250 / 200.75 unknown <--- ???
omg! which Memory have my card?
ok i have tryed to flash with this 3 bios version:
-Powercolor 9600 Non-Pro 256 MB Dec 1st 2004 10:37 PM Mar 19th 2005 5:05 PM 398.25 / 202.5
unknown
-Powercolor 9600 Pro 256 MB Oct 6th 2003 7:44 PM Apr 25th 2004 11:06 AM 398 / 203
Samsung
-Powercolor 9600 Pro 256 MB Jul 24th 2003 9:04 PM Jun 17th 2004 1:44 PM 398 / 203
Elixir
and i get allways an error "wrong SSID" Press 1 to end ?!??!
wth is a SSID? all bios i tryed dont have the right SSID. atiflash says my SSID = 2084
does not agree with the other biosversions.
HELP please what i have to do
U
Unregistered
Guest
i had the same problem. try to flash using -f option ( force ).Unregistered said:hi all.
im am new and i have question. maybe sum1 can help me
i want to flash my Powercolor 9550 (256Mb) to a 9600
this is what i know about my card:
eneral
Display adapter Radeon 9550 (4153)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2084
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{AD6D871A-DC8D-485A-9EB2-01F34C319585}\0000
______________________________
Clock Information
BIOS VPU 250,00
Current VPU 249,75
BIOS MEM 200,00
Current MEM 195,75
______________________________
Radeon PCI configuration space
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 02 10 53 41 07 00 B0 02 00 00 00 03 08 20 80 00
10 08 00 00 C0 01 A8 00 00 00 00 EF DF 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
30 00 00 EC DF 58 00 00 00 00 00 00 00 10 01 08 00
40 00 00 00 00 00 00 00 00 00 00 00 00 8C 14 84 20
50 01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF
60 02 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
______________________________
Hardware Information
Installed memory 256 Mb
Memory Type DDR SDRAM
Memory Width 128 bit
Active Rendering Pipelines 4
______________________________
ASIC details
Family 45
Emulated Revision 5
Gfx Engine ID 0
______________________________
Radeon Registers
RADEON_BIOS_0_SCRATCH 00040004
RADEON_BIOS_1_SCRATCH 0100C000
RADEON_X_MPLL_REF_FB_DIV 03251D04
RADEON_XCLK_CNTL 00A07FFA
RADEON_MCLK_CNTL 00031212
RADEON_XDLL_CNTL 0400BC30
RADEON_XPLL_CNTL 48001A00
GB_TILE_CONFIG 00010011
MC_TIMING_CNTL 1A29A323
MC_SDRAM_MODE_REG 31320032
MC_REFRESH_CNTL 00001017
______________________________
Video BIOS Information
Version 008.017D.033.00
Part Number BK-ATI VER008.017D.033.000
Date 2005/01/20 22:29
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x90
Controller 1
Active Connections:
No Active Connections
______________________________
but
1: which bios i have to use? on the bios-collection i find only this card. is that my card???.
Powercolor 9550 256 MB Apr 8th 2004 7:15 AM Jul 25th 2004 5:18 PM 250 / 200.75 unknown <--- ???
omg! which Memory have my card?
ok i have tryed to flash with this 3 bios version:
-Powercolor 9600 Non-Pro 256 MB Dec 1st 2004 10:37 PM Mar 19th 2005 5:05 PM 398.25 / 202.5
unknown
-Powercolor 9600 Pro 256 MB Oct 6th 2003 7:44 PM Apr 25th 2004 11:06 AM 398 / 203
Samsung
-Powercolor 9600 Pro 256 MB Jul 24th 2003 9:04 PM Jun 17th 2004 1:44 PM 398 / 203
Elixir
and i get allways an error "wrong SSID" Press 1 to end ?!??!
wth is a SSID? all bios i tryed dont have the right SSID. atiflash says my SSID = 2084
does not agree with the other biosversions.
HELP please what i have to do
ALWAYS KEEP APART A BOOT FLOPPY WITH YOUR ORIGINAL BIOS !
it could happen that the bios does not fit ( quicker memories ), and you'll see lots of flashing lines on the screen, while windows starts normally.
Beautiful, but not useful
U
Unregistered
Guest
its my again
thanks it works great.
General
Display adapter Radeon 9600XT (4152)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2070
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{450EAC72-A7E0-4228-BA22-6407AEF77D04}\0000
______________________________
Clock Information
BIOS VPU 398,00
Current VPU 397,80
BIOS MEM 203,00
Current MEM 201,60
______________________________
______________________________
Video BIOS Information
Version 008.015.028.000
Part Number BK-ATI VER008.015.028.000
Date 2003/07/24 16:04
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x85
Controller 1
Active Connections:
No Active Connections
______________________________
thanks it works great
.General
Display adapter Radeon 9600XT (4152)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2070
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{450EAC72-A7E0-4228-BA22-6407AEF77D04}\0000
______________________________
Clock Information
BIOS VPU 398,00
Current VPU 397,80
BIOS MEM 203,00
Current MEM 201,60
______________________________
______________________________
Video BIOS Information
Version 008.015.028.000
Part Number BK-ATI VER008.015.028.000
Date 2003/07/24 16:04
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x85
Controller 1
Active Connections:
No Active Connections
______________________________
U
Unregistered
Guest
i forgot to say
big thanks to all
big thanks to all
U
Unregistered
Guest
msi rx 9550 with fan
can i tranform this one to a 9600. but how? which bios? my core 478.29/223.71
can i tranform this one to a 9600. but how? which bios? my core 478.29/223.71
U
Unregistered
Guest
good !
Unregistered said:its my again
thanks it works great
General
Display adapter Radeon 9600XT (4152)
Core Name RV350
SubVendor C.P. Technology (PowerColor) (148C)
SubDevice 2070
BUS 1
Device 0
Function 0
Base Address 0 C0000008
Base Address 1 0000A801
Base Address 2 DFEF0000
Base Address 3 00000000
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{450EAC72-A7E0-4228-BA22-6407AEF77D04}\0000
______________________________
Clock Information
BIOS VPU 398,00
Current VPU 397,80
BIOS MEM 203,00
Current MEM 201,60
______________________________
______________________________
Video BIOS Information
Version 008.015.028.000
Part Number BK-ATI VER008.015.028.000
Date 2003/07/24 16:04
______________________________
Controller Configurations
Controller 0
Active Connections:
-Primary Display (0) 1024x768x85
Controller 1
Active Connections:
No Active Connections
______________________________
U
Unregistered
Guest
Gecube R9550GT-C3H
Im new here, but im always read all ur post here due to wide spread of oveclocking of r9550, and i already buy an ATI radeon 9550GT-C3H from Gecube and throw my old VC (fx5500), my ATItool detected my r9550GT as follows
Device ID: 4152
Chip:RV360,9600 series
Memory: 128mb
Memory bus width: 128 bit
Default core clock: 400
Defualt memory clock: 200
active pipe lines: 4
My Question here is Gecube overcloked its line of R9550 by changing the bios? since my PC detected my new VC as 9600 series GPU?
I already overclocked my GPU to max core clocked of 540mhz and 270 memory clocked w/o any problem specialy on the games like far cry, doom3 and i dont encounter any problem (high detail).
Pls reply???
Im new here, but im always read all ur post here due to wide spread of oveclocking of r9550, and i already buy an ATI radeon 9550GT-C3H from Gecube and throw my old VC (fx5500), my ATItool detected my r9550GT as follows
Device ID: 4152
Chip:RV360,9600 series
Memory: 128mb
Memory bus width: 128 bit
Default core clock: 400
Defualt memory clock: 200
active pipe lines: 4
My Question here is Gecube overcloked its line of R9550 by changing the bios? since my PC detected my new VC as 9600 series GPU?
I already overclocked my GPU to max core clocked of 540mhz and 270 memory clocked w/o any problem specialy on the games like far cry, doom3 and i dont encounter any problem (high detail).
Pls reply???
U
Unregistered
Guest
hi
I flashed my asus a9550 ge/td 256 with ati 9600 pro bios, and it worked, but after that i tried to use a modified version of that bios (I used radedit to do that) to be an asus 9600... but when I rebooted the pc I haven't got any signal... can I solve this using a pci card and flashing again to ati 9600 or asus 9550 bios? tnx in advance
I flashed my asus a9550 ge/td 256 with ati 9600 pro bios, and it worked, but after that i tried to use a modified version of that bios (I used radedit to do that) to be an asus 9600... but when I rebooted the pc I haven't got any signal... can I solve this using a pci card and flashing again to ati 9600 or asus 9550 bios? tnx in advance
SPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
yes
U
Unregistered
Guest
thanks sean478, now I'm going to have an hard time finding a pci card...bah....well better the time spent doing that than having a useless asus 9550 on my desk 
SPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
my guess it the bios got corrupt during the edit try useing rabit (radeon bios editor) to edit from now on it will tell you when the bios gets corrupt
try useing rabit (radeon bios editor) to edit from now on it will tell you when the bios gets corrupt
U
Unregistered
Guest
haaum... just one question, when I start the computer whitout a graphics card it gives a long bleep and starts, but when i'm using the asus 9550 (I haven't got the pci card yet ) it won't start at all... no bleeps or sounds from the floppy... is this normal??
) it won't start at all... no bleeps or sounds from the floppy... is this normal??
U
Unregistered
Guest
Change device id
change device id is dangerous? thanks
change device id is dangerous? thanks
U
Unregistered
Guest
help pleaseUnregistered said:
SPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
no it wont hurt itUnregistered said:
it may make it so the driver wont install right though
U
Unregistered
Guest
Thankssean478 said:no it wont hurt it
But i can flash 9550 in 9600 changing only device id? Change id to 4152 or 4150?Sorry for my bad english, thanks
SPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
no to do it right you need to use a 9600 bios
to do it right you need to use a 9600 bios
U
Unregistered
Guest
Ok, but i have an asus 9550 128 Mb 64 bit: how can i do? Is possible flashing to asus 9600SE?
NOTE: the memory not are the same brand 9550 is promos, 9600SE is samsung
NOTE: the memory not are the same brand
9550 is promos, 9600SE is samsungSPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
yes you should be able to use that bios but first you will need to open your curent one and the new one (9600se) in a program called rabit
then edit the memory speed and timeings to match the origional (9550) bios
http://www.softpedia.com/get/Tweak/Video-Tweak/ATi-Radeon-BIOS-Tuner.shtml
make shure that all the timeings match your origional bios otherwise it may not work
by the way you need a pci video card incase it goes wrong
then edit the memory speed and timeings to match the origional (9550) bios
http://www.softpedia.com/get/Tweak/Video-Tweak/ATi-Radeon-BIOS-Tuner.shtml
make shure that all the timeings match your origional bios otherwise it may not work
by the way you need a pci video card incase it goes wrong
U
Unregistered
Guest
Thanks I try later
U
Unregistered
Guest
I tried, flash is successfull, but i have a problem: windows not recognized the graphics card; if i install driver, monitor is corruptUnregistered said:Thanks I try later
Because?SPHERE
New Member
- Joined
- Mar 31, 2005
- Messages
- 821 (0.11/day)
- Location
- arizona (cave creek)
| Processor | opteron 165 |
|---|---|
| Motherboard | dfi cfx3200 |
| Cooling | zalman 7000 |
| Memory | mushkin xp4000 |
| Video Card(s) | x1900xt |
| Storage | 4x320 7200.10 raid |
| Display(s) | 21" sony trinitron |
| Case | v2000b lianli |
| Audio Device(s) | x-fi platinum |
| Power Supply | pcpac 510 |
| Software | gaydows |
humm.. odd.. ive encountered that prob before but unfortunatly i never figured out what caused it if you do let me know
if you do let me know
U
Unregistered
Guest
I riflash to original bios 9550 and there aren' t any problems. But because i can' t flash to 9600? I have put the same latency, the good frequency ( 405/425 ) which working, the only things which i change are: bios and id. Mystery... I can tell you all that which i did step by step?
I can tell you all that which i did step by step?
U
Unregistered
Guest
I want to flash my Powercolour 9550 256 mb to a 9600 pro, do I need extra cooling fans and stuff like that?