Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[Robits]

Is there a way to stop updates? Every single time I install this realtek mod the Windows Store updates the app and I can't use DTS because is asking for a licence, Is Dolby Atmos for gaming the same as Dolby Atmos for headphones?

 

[Ferather]

Dolby Atmos for gaming the same as Dolby Atmos for headphones? - No, Dolby decided to milk their brand by bringing out Atmos with flavours.

 

[Robits]

Dolby Atmos for gaming the same as Dolby Atmos for headphones? - No, Dolby decided to milk their brand by bringing out Atmos with flavours.

View attachment 201694

Thank you so much dude!

 

[Ferather]

For anyone using 5.1, you can get virtual sides, normally only with analogue, but with a trick in the driver, also SPDIF.
Set the output as 7.1, and disable the side speakers, this tells Windows to handle 8 channels as 6.



@Alan Finotty

\EP\0,%PKEY_AudioEndpoint_FullRangeSpeakers%,%REG_DWORD%,0x0000063f
\EP\0,%PKEY_AudioEndpoint_PhysicalSpeakers%,%REG_DWORD%,0x0000003f





Near enough, 37mbps PCM input.

 

[Robits]

I reinstalled the drivers and for some reason DTS Sound Unbound is not being installed, I've tried using the AAFuninstaller tool and DriverStoreExplorer.

 

[Ferather]

Did you fully uninstall the apps before you removed the driver? If you have 7-zip, right click it and open as 'Admin'.
Navigate to: C:\Program Files\WindowsApps\ and delete any DTS apps you see there.



You can also try my 'DTS Full Reset'. Restart, then re-install.

 

[Snk3]

Guys, I have installed driver AAFAudioPackDCH-6.0.9137.1 and I can see DDL and DTS Interactive options avaliable, but both sounds only 3.1 on my home theater by optical cable, rear channels are not working, any way to set 5.1 correctly? My codec is ALC1220.

 

[dhrto]

Guys, I have installed driver AAFAudioPackDCH-6.0.9137.1 and I can see DDL and DTS Interactive options avaliable, but both sounds only 3.1 on my home theater by optical cable, rear channels are not working, any way to set 5.1 correctly? My codec is ALC1220.

Try untick 'enable audio enhancements' in Advanced tab of audio properties.
See post a while back for details: https://www.techpowerup.com/forums/...dio-driver-for-windows-10.250915/post-4441627

 

[Snk3]

Try untick 'enable audio enhancements' in Advanced tab of audio properties.
See post a while back for details: https://www.techpowerup.com/forums/...dio-driver-for-windows-10.250915/post-4441627

Thanks, but is still not working. And if I install AFF driver chosing DDL or DTS Interactive of separated options, none of them works, only the option DDL + DTS Interactive works for me, don't know why. I'm using only SB 360 and DTS Ultra, with realtek console.

I think the last time I got 5.1 working on my HT, was with my old sold SBZ, and now I regret for selling she.

 

[dhrto]

Yes I'm also using the 'old' DDL + DTS interactive option, UAD driver (not legacy), with no other options at all (except ASIO). Try it with this 'minimal' configuration and see if it works. In my experience all those 'enhancers' just create more trouble.

 

[Snk3]

Yes I'm also using the 'old' DDL + DTS interactive option, UAD driver (not legacy), with no other options at all (except ASIO). Try it with this 'minimal' configuration and see if it works. In my experience all those 'enhancers' just create more trouble.

I got it, but SB Connect 360 makes way BIIIIG difference in headphone mode, can't get rid of it. Now I regret even more for selling my old SBZ

 

[nlse]

Hi is there any guide to get the Realtek driver to update as it seems Driver return version = 9075 <<6.0.9075.1
and not the latest, uninstalled in the rapr

thank you

Good sound

Does any one know how to uninstall or to get to a new if the otherone does not seem to get uninstalled with the rapr uninstaller

 

[TheDoctorTash]

Does any one know how to uninstall or to get to a new if the otherone does not seem to get uninstalled with the rapr uninstaller

Try it

 

[Ferather]

Sounds like the force feature in the DriverExplorer app was used at some point. If you break Windows enough with that app, say bye bye and install a new Windows.
I don't know how many times I have said this now, I am so tempted to put it in my signature, except not all browsers show the signature.......

----

Here is something I do in general, I make a fresh install of Windows, with all partitions (recovery, boot, so on), I install all updates, essential apps I want, but no drivers.
I then use Paragon backup and recovery, to make a partition backup, as a single compressed file, on another drive-partition, it takes about 8 minutes.

Later I will install drivers, or anything else that COULD potentially go wrong, if all goes well I make another separate backup.
If in the future, something goes wrong, it takes me 6-8 mins to fully format then restore Windows.

 

[Snk3]

Try untick 'enable audio enhancements' in Advanced tab of audio properties.
See post a while back for details: https://www.techpowerup.com/forums/...dio-driver-for-windows-10.250915/post-4441627

I re-checked your suggestion and I see it works, but rear channels are too muffed, almost can't hear them. I tested both plugging in place of the front channels and no issues with they, good volume.

 

[Ferather]

Now you wont get true surround and only cloned stereo. Disabling enhancers which by default should be on, and then plugging in for stereo then re-plugging for surround is not what I call a solution.

No offense.

 

[Snk3]

Now you wont get true surround and only cloned stereo. Disabling enhancers which by default should be on, and then plugging in for stereo then re-plugging for surround is not what I call a solution.

No offense.

I have done that just to eliminate the possibility of faulty speakers, can't place two speakers in a single channel.

 

[Ferather]

It's a shame you cannot use Alan latest driver, although it still contains the broken patched APO, other than Dolby Digital Live, Alan has no reason to support it.
I used to have a Creative X-Fi, while I don't use Alans driver, I can confirm DTS APO4 will make your Creative sale a positive one.

 

[Snk3]

Any tips for how I can get 5.1 normally by SPDIF? I mean, rear channels sounds very low volume, and works (barely) only if I keep enhancements disabled. I'm using latest AAF driver, 6.0.9159.1.

 

[dhrto]

That's strange and I'm sorry to hear that @Snk3. In my case the volume of the rear channels is normal with DTS Interactive via S/PDIF. Tested in several games. Currently running 6.0.9155.1.

 

[Ferather]

Its possible to add DTS Interactive to an ordinary Realtek driver. Not sure why you have a rear channel issue, I am in the same boat as dhrto, all working, but different driver.
Out of curiosity, do you get proper rear with my DTS DCH driver? It uses dedicated DTS Interactive with APO, not patched Realtek APO.

Also note the patched APO, is obsolete, not supported, out-of-date, and issue prone

----

Dolby Digital Live! - Lossy - 640kpbs.
DTS Interactive - Lossy - 1540kbps.

Fun fact, I can get FLAC (lossless) @ 1000-1500kbps

----

Also note, DTS encoding is backwardly compatible, unlike Dolby encoding with requires a new decoder, then new hardware.



DTS Interactive can also be upgraded to Interactive:X with APO4.

 

[divyansh]

DOWNLOAD MY DRIVERS FROM HERE:
DCH-UAD VERSION (RECOMMENDED)

Releases · AlanFinotty/AAFDCHDriverMod

Realtek Audio Driver Mods by Alan Finotty. Contribute to AlanFinotty/AAFDCHDriverMod development by creating an account on GitHub.

github.com

STANDARD VERSION

DCH DRIVER VERSION UPDATED TO 6.0.9159.1
HDA PANEL INCLUDED IN DCH DRIVER

Spoiler: EFFECTS AND IMAGES

Spoiler: FROM WINDOWS 7 & WINDOWS 8 (STANDARD)

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 8.1 TO WINDOWS 10 14393 (STANDARD)

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 10 15063 ONWARDS (STANDARD)

• ASIO EXTRA
• REALTEK DEFAULT EFFECTS
• REALTEK DEFAULT EFFECTS WITH DDL/DTS
• CREATIVE SOUND BLASTER CONNECT 2 (LEGACY)
  • 360°
  • 720°
• NAHIMIC 3
• SONIC STUDIO 3 (ASUS ROG)
• SONIC RADAR 3 SUPPORTED
• DOLBY ATMOS
• DOLBY DIGITAL (OVERRIDE)
• DTS INTERACTIVE (OVERRIDE)

Spoiler: FROM WINDOWS 10 15063 ONWARDS (DCH-UAD AND DCH-HDA)

• REALTEK ASIO
• REALTEK DEFAULT EFFECTS WITH DOLBY DIGITAL LIVE & DTS INTERACTIVE
• REALTEK DEFAULT EFFECTS WITH DOLBY DIGITAL
• CREATIVE SOUND BLASTER CONNECT (UWP)
  • 360°
  • 720°
  • CINEMA 5
• NAHIMIC 3 (APO v3)
• SONIC STUDIO 3 (ASUS ROG) (APO v3)
• SONIC STUDIO 3 (ASUS ROG) (APO v4)
• SONIC RADAR 3 SUPPORTED
• DOLBY ATMOS SPEAKER SYSTEM
• DOLBY ATMOS FOR GAMING
• DTS:X ULTRA
• DTS SOUND UNBOUND

IMAGES (WINDOWS 10)

Spoiler: IMAGES (STANDARD VERSION)

CREATIVE PANEL (LEGACY)
View attachment 145072

Spoiler: IMAGES (DCH-UAD VERSION)

REALTEK AUDIO CONSOLE (UWP)
View attachment 159335
View attachment 159540

CREATIVE PANEL (UWP)
View attachment 158671

Spoiler: IMAGES (BOTH VERSIONS)

NAHIMIC 3
View attachment 133729

SONIC STUDIO 3 (ASUS ROG)
View attachment 156931

View attachment 156932

View attachment 156933

SCOUT RADAR 3 (NOT INCLUDED, BUT SUPPORT ENABLED)
View attachment 156935

View attachment 156936

DOLBY ATMOS
View attachment 143507

ATTENTION: If the Sound Blaster, if installed, is unable to detect your audio device correctly, the executable that will allow you to restore this operation is attached.

DOWNLOAD KGA CONFIG EXECUTABLE

ENJOY !!!

For me it installed with no problems and everything seem to be working except VoiceMorph from "SoundBlaster Connect 2". When I try to enable it I hear some weird sounds like a laggy recording (maybe it supposed to be this way so you can actually hear yourself but the playback speed of the audio is very slow ... not sure).

View attachment 113507

Look cool tho ... and the "regular" audio drivers have some new options like "DTS Connect" and "SounzReal EXP" - dont know what this last one is tho

View attachment 113509

This SounzReal EXP doesn't seem to be working ... I can't click on any buttons ! (the DTS Connect I think you need an optical connection to a DTS receiver or something). Is the driver correctly installed not sure how to check ...

I don't know sadly how to "test it" all to see if it really works but sound difference I've noticed really quick with some AudioTehnica M50X headphones !

DOWNLOAD MY DRIVERS FROM HERE:
DCH-UAD VERSION (RECOMMENDED)

Releases · AlanFinotty/AAFDCHDriverMod

Realtek Audio Driver Mods by Alan Finotty. Contribute to AlanFinotty/AAFDCHDriverMod development by creating an account on GitHub.

github.com

STANDARD VERSION

DCH DRIVER VERSION UPDATED TO 6.0.9159.1
HDA PANEL INCLUDED IN DCH DRIVER

Spoiler: EFFECTS AND IMAGES

Spoiler: FROM WINDOWS 7 & WINDOWS 8 (STANDARD)

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 8.1 TO WINDOWS 10 14393 (STANDARD)

• REALTEK DEFAULT EFFECTS
• CREATIVE SOUND BLASTER X-Fi MB5

Spoiler: FROM WINDOWS 10 15063 ONWARDS (STANDARD)

• ASIO EXTRA
• REALTEK DEFAULT EFFECTS
• REALTEK DEFAULT EFFECTS WITH DDL/DTS
• CREATIVE SOUND BLASTER CONNECT 2 (LEGACY)
  • 360°
  • 720°
• NAHIMIC 3
• SONIC STUDIO 3 (ASUS ROG)
• SONIC RADAR 3 SUPPORTED
• DOLBY ATMOS
• DOLBY DIGITAL (OVERRIDE)
• DTS INTERACTIVE (OVERRIDE)

Spoiler: FROM WINDOWS 10 15063 ONWARDS (DCH-UAD AND DCH-HDA)

• REALTEK ASIO
• REALTEK DEFAULT EFFECTS WITH DOLBY DIGITAL LIVE & DTS INTERACTIVE
• REALTEK DEFAULT EFFECTS WITH DOLBY DIGITAL
• CREATIVE SOUND BLASTER CONNECT (UWP)
  • 360°
  • 720°
  • CINEMA 5
• NAHIMIC 3 (APO v3)
• SONIC STUDIO 3 (ASUS ROG) (APO v3)
• SONIC STUDIO 3 (ASUS ROG) (APO v4)
• SONIC RADAR 3 SUPPORTED
• DOLBY ATMOS SPEAKER SYSTEM
• DOLBY ATMOS FOR GAMING
• DTS:X ULTRA
• DTS SOUND UNBOUND

IMAGES (WINDOWS 10)

Spoiler: IMAGES (STANDARD VERSION)

CREATIVE PANEL (LEGACY)
View attachment 145072

Spoiler: IMAGES (DCH-UAD VERSION)

REALTEK AUDIO CONSOLE (UWP)
View attachment 159335
View attachment 159540

CREATIVE PANEL (UWP)
View attachment 158671

Spoiler: IMAGES (BOTH VERSIONS)

NAHIMIC 3
View attachment 133729

SONIC STUDIO 3 (ASUS ROG)
View attachment 156931

View attachment 156932

View attachment 156933

SCOUT RADAR 3 (NOT INCLUDED, BUT SUPPORT ENABLED)
View attachment 156935

View attachment 156936

DOLBY ATMOS
View attachment 143507

ATTENTION: If the Sound Blaster, if installed, is unable to detect your audio device correctly, the executable that will allow you to restore this operation is attached.

DOWNLOAD KGA CONFIG EXECUTABLE

ENJOY !!!

Hey, I need some help with these drivers they install but doesn't work windows default driver takes over and if I reinstall my recommended drivers "6.0.8904.1" the equalizer comes back and all the effects work and everything in the Realtek audio console and after restart it goes away is there any way to keep the eq I really need the eq. this is the device (https://www.acer.com/ac/en/US/content/support-product/8336?b=1) this link also has the driver which I am currently using If i use any other driver from acer website thet work but only the laptop microphone works not the headset mic If u could look into the eq thing that will be great help
Thanks.

 

[Zonder]

Hey, I need some help with these drivers they install but doesn't work windows default driver takes over and if I reinstall my recommended drivers "6.0.8904.1" the equalizer comes back and all the effects work and everything in the Realtek audio console and after restart it goes away is there any way to keep the eq I really need the eq. this is the device (https://www.acer.com/ac/en/US/content/support-product/8336?b=1) this link also has the driver which I am currently using If i use any other driver from acer website thet work but only the laptop microphone works not the headset mic If u could look into the eq thing that will be great help
Thanks.

Put what is in the screenshot, click save and restart

 

[divyansh]

Put what is in the screenshot, click save and restart

If I install some other driver Headset mic doesn't show up in any way

Put what is in the screenshot, click save and restart

nothing happened after this thanks for help though.

 

[Zonder]

If I install some other driver Headset mic doesn't show up in any way


nothing happened after this thanks for help though.

This is how the equalizer appears-if it has disappeared in the HDA panel. I didn't say anything over the microphone.