Realtek Modded Audio Driver for Windows 10/11 - Only for HDAUDIO

[AAF Optimus]

If i use APODriver on this and tried to add Dolby Theater V4 feature, will your drive have Dolby Theater v4 in it?

Yes. But, if you are using Windows 10, this package already has Dolby Atmos.

 

[antonkaz]

Yes. But, if you are using Windows 10, this package already has Dolby Atmos.

Hello Alan. Please make mod drivers for streaming video and audio.
Thanks

 

[robnitro]

Update, ran tweaking.com app to fix permissions of registry filesystem etc,
Now it works fine. But on my other pc first install gave sb connect not detecting device.
Also, sb connect surround really sucks if you have a center channel, i had to turn off the center channel to make sound better from stereo sources expanded to surround (w sbconnect)

8896.1 win10 x64 on realtek alc1220 on asrock z390 extreme 4 motherboard.
Thanks for this but I'm having an issue during install, stuck at "installing realtek extension"
With drvinst.exe using cpu and not doing anything.
If I kill the drvinst.exe, it continues and I have sound but sb connect complains device not found?

from event viewer 'system' event id 219
The driver \Driver\AAFBus64 failed to load for the device PCI\VEN_1002&DEV_AAF0&SUBSYS_AAF0148C&REV_00\4&c47d4c6&0&0108.

 

[eH-Sh4dowco]

Is there any fix for Realtek manager and SB Connect 2 in Windows 7?

 

[robnitro]

Is there any fix for Realtek manager and SB Connect 2 in Windows 7?

What issue ? I have it working after 2 uninstall, reinstalls
If you're talking about the start menu shortcuts, yeah I don't understand that crap... why would it sometimes not get created? no clue

 

[ingaos]

i have a problem with sound blaster connect 2

 

[eH-Sh4dowco]

What issue ? I have it working after 2 uninstall, reinstalls
If you're talking about the start menu shortcuts, yeah I don't understand that crap... why would it sometimes not get created? no clue

Whats is your OS?? I tried uninstalling and cleaning the driver. I'm not talking about start menu Realtek manager doesn't launch and SB Connect says Device not detected I strongly recommend you read the previous forums to understand the issue.

 

[MasterBeiShen]

Whats is your OS?? I tried uninstalling and cleaning the driver. I'm not talking about start menu Realtek manager doesn't launch and SB Connect says Device not detected I strongly recommend you read the previous forums to understand the issue.

I found this happening to me once too. Go to Device Manager and you'll see you might have to reinstall the driver from there.

 

[ador250]

I have made Realtek UAD drivers with all creative legacy products such as THX, Cinema, X-fi. If anyone interested u can try them Download Here

 

[eH-Sh4dowco]

I found this happening to me once too. Go to Device Manager and you'll see you might have to reinstall the driver from there.

You have Windows 7. Really ? Install over and over from device manager?

I have made Realtek UAD drivers with all creative legacy products such as THX, Cinema, X-fi. If anyone interested u can try them Download Here

It's compatible with Win 7?

 

[ador250]

You have Windows 7. Really ? Install over and over from device manager?



It's compatible with Win 7?

Nope, only windows 10. For windows 7 Try this @eH-Sh4dowco

 

[eH-Sh4dowco]

Nope, only windows 10. For windows 7 Try this @eH-Sh4dowco

It worked!!! Thank you so much @ador250 I'm so happy now, finally I'm getting EAX X-Fi Patch Effects over Unreal Tournament 2004 and real SB Connect effects!! Thanks again Bro

 

[max_clif]

Yes. But, if you are using Windows 10, this package already has Dolby Atmos.

Yes I can unlock dolby theater 4 (which is great!), but nahimic and atmos doesnt work. It just closes right away when I try to open the application. I tried reinstalling around 5x and still the same result Creative seems to work though

 

[AAF Optimus]

NEW DRIVERS RELEASED IN GITHUB
UPDATED VERSION TO 6.0.8898.1
NEW FIXES AND CHANGES
REUPLOADED

ATTENTION: You will need to uninstall the currently installed version before continuing with this installation. A condition has been imposed for this due to problems reported by some users.

GO TO 1st PAGE
ENJOY!!!

 

[max_clif]

thanks - i still couldnt get ATMOS or Nahimic to run on my ALC892

And this version doesnt have Dolby Theater 4 build into it

 

[AAF Optimus]

thanks - i still couldnt get ATMOS or Nahimic to run on my ALC892

And this version doesnt have Dolby Theater 4 build into it

Please check if the standard Realtek effects work in Realtek Audio Manager. (Equalizer, Room Correction, etc.)

 

[max_clif]

the effects for AAFDrvPackInst_HDA-6.0.8898.1 are there, but it seems movies and music doesnt play at all (either no sound or an error in playback module in foobar2000). Neither nahimic or creative will run.

Going back to AAFDrvPackInst_HDA-6.0.8896.1 i am now unable to enable Dolby theater 4. The page for the dolby is now blank with an error

 

[Copeland]

Installed and nothig works :/

 

[AAF Optimus]

@eH-Sh4dowco
I apologize in advance for the inconvenience and for my driver package not working with you. But I checked here and found the problem. This is not a bad driver, but because driver version 6.0.8881.1 is the latest version of the Realtek driver that is still compatible with Windows 7, this means that versions released higher than this will not automatically receive support for Windows 7.

 

[norman1925]

1. Install Virtual Audio Cable.
2. Open Sound Control Panel.
3. Go to recording tab and open Cable Output.
View attachment 144186
4. Go to Listen tab. Configure as shown.
View attachment 144187
5. Check whether your default playback device remains the one you usually use.

What this procedure does: It plays silence in the system always. As something is playing, DDL remains active.

Thx A lot man works perfect!!! now DTS or DDL is always on

I updated from AAFDrvInst_HDA_ALL_AE-6.0.8854.1_2 to AAFDrvPackInst-6.0.8892.1
And since then my DD 5.1 option is gone.

The fix from first page only works for DTS, but DTS seems to sound horribly on windows level. For example youtube only plays from center speaker and sounds very low quality.

I also did a clean install to latest release AAFDrvPackInst_HDA-6.0.8896.1.exe but no joy. (for some reason the fix was already applied, so I guess it wasnt very clean install...uninstaller doesnt do a very good job and there are tons of leftovers)

http://imgur.com/ZjqO5m5

DD 5.1 worked fine for me with AAFDrvInst_HDA_ALL_AE-6.0.8854.1_2, but now even downgrading to that version does not give the option back.

Any idea how to get it back?

Its the main reason why I use this modded driver.

I also posted this on Github https://github.com/AlanFinotty1995/AAFRealtekMod/issues/17

EDIT:
Actually correction, now I get the weird sound from only Center speaker with low quality even with the 2 channel option.
Something is very messed up.

EDIT2:
Ok, strange.

I have now installed the generic latest drivers from here: https://github.com/alanfox2000/realtek-hda-release/releases

8895_FF00_PG475_Win10_RS5_19H1_X64_WHQL.zip

Without uninstalling the modded driver.
The installation uninstalled something (realtek driver), then rebooted and then installed the generic driver.

Now I can see the DD 5.1 option. But its not the modded driver.

http://imgur.com/HGtxlt4

Sound works fine, no more low quality center speaker only sound.

I guess I will leave it at that, for the moment.

i have the same thing. I was already going crazy with this difference in the audio "I thought it was my ears that were failing "
after dealing which some older driver, i get a working one:

https://github.com/AlanFinotty1995/AAFRealtekMod/releases/download/6.0.8835.1/AAFDrvInst_HDA_ALL_PCEE4_DDP_ATM-6.0.8835.1.exe

working fine no more ugly sound.
but your solution is better!!!
thx

 

[slayer23]

Hi all, i am actually using Alan's realtek and everything works well (using Optical to my HTIB). I also used Apo to unlock Dolby Digital on my Nvidia HDMI audio cable. From your experience guys what would be the best (DTS Interractive 5.1 on the Optical or Dolby Digital on the HDMI)?
I hope this question was not asked before.

 

[CityCultivator]

Hi all, i am actually using Alan's realtek and everything works well (using Optical to my HTIB). I also used Apo to unlock Dolby Digital on my Nvidia HDMI audio cable. From your experience guys what would be the best (DTS Interractive 5.1 on the Optical or Dolby Digital on the HDMI)?
I hope this question was not asked before.

Uncompressed 5.1 on HDMI, if supported. Else, DTS Connect APO on Nvidia HDMI.
What HTIB are you using?

 

[Mircosfot]

Hi, this supports NVIDIA via HDMI: https://nvidia.custhelp.com/app/ans...ch-hdmi-audio-formats-do-nvidia-gpus-support? But Dolby Atmos and DTS:X isnt working yet, this will be come back with the windows update 20H1

 

[slayer23]

Uncompressed 5.1 on HDMI, if supported. Else, DTS Connect APO on Nvidia HDMI.
What HTIB are you using?

It is a LG BH7420. From windows it is only detected as a Stereo receiver (not surprising for a HTIB) so not sure how i can achieve Uncompressed 5.1 (just leave it as 2ch 24bits 96kHz ?) So far i only found out how to enable Dolby digital, not much information about unlocking other compression technologies.

Hi, this supports NVIDIA via HDMI: https://nvidia.custhelp.com/app/answers/detail/a_id/2796/~/which-hdmi-audio-formats-do-nvidia-gpus-support? But Dolby Atmos and DTS:X isnt working yet, this will be come back with the windows update 20H1

Thanks for the information. My sound system is kinda old so it only supports Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS and DTS-HD.

 

[CityCultivator]

It is a LG BH7420. From windows it is only detected as a Stereo receiver (not surprising for a HTIB) so not sure how i can achieve Uncompressed 5.1 (just leave it as 2ch 24bits 96kHz ?) So far i only found out how to enable Dolby digital, not much information about unlocking other compression technologies.



Thanks for the information. My sound system is kinda old so it only supports Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS and DTS-HD.

Click Configure speakers in sound control panel, right-clicking audio endpoint.
You should get 5.1, 7.1.
I would not recommend you do so if the main usage of the system is movie playback; bitstreaming is better in such cases.