The AMD Phenom II OC'ers Club

[Chicken Patty]

got ya?, in that case ill run a quick test now of super p.i mod

Let me know, should work out the same for you.

 

[Corduroy_Jr]

its all in your head man lol, did a test from stock blue to silver, to my surprise blue was slightly quicker

 

[Corduroy_Jr]

maybe blue likes me considering its my fav color lmao

 

[Chicken Patty]

its all in your head man lol, did a test from stock blue to silver, to my surprise blue was slightly quicker

naw, i actually compared ten consecutive runs, gathered an average and silver was a few tenths quicker. I read this online, I'm not making it up

 

[Corduroy_Jr]

maybe so, so i have to take your word for it, cause only did one pass, maybe theirs others on tpu to find out if its a fact or theory

 

[Chicken Patty]

maybe so, so i have to take your word for it, cause only did one pass, maybe theirs others on tpu to find out if its a fact or theory

Sure not everybody gets the same results, but mine were better. Why? beats me, but they were

 

[Corduroy_Jr]

Sure not everybody gets the same results, but mine were better. Why? beats me, but they were

3dmark runs

 

[Chicken Patty]

3dmark runs

Not bad runs at all. Going to try 4.2 GHz?

 

[Corduroy_Jr]

Not bad runs at all. Going to try 4.2 GHz?

much appreciated, for 4.2ghz just waiting for this ac to kick in, then will see

 

[Chicken Patty]

can't wait

 

[Corduroy_Jr]

4.2ghz shot not officaly stable

can't wait

this beast keeps going and going lol

 

[Corduroy_Jr]

cant get 4.2ghz stable, cause of vcore isssues with motherboard
if i raise the vcore any higher then 5.1250v i get a bosd before getting into windows, don't matter what the clock speeds i set cpu at, going for 4.1ghz instead

 

[Corduroy_Jr]

this beast keeps going and going lol

add to me to wprime chicken

 

[Chicken Patty]

add to me to wprime chicken

post it over in the thread dude, great run

 

[Corduroy_Jr]

i will thanks

 

[exodusprime1337]

So yay is me, a good guy named chew* hooked me up with a crosshair IV and i migrated my 1090t into it.. thing is the temp sensors on my 1090t suck and the crosshair IV reads board temps much higher than my m4a79t.. anybody have any idea what the approximate offset if there is any on the 1090t.. right now it says it's 19c... it's about 24c in my room and i'm on water with a 120x3 rad 6 fans push pull and a fuzion v2 block freshly cleaned radiator and block with distilled water... oh and voltage is 1.50 at 4.25Gz..

 

[fullinfusion]

nothing wrong with that temp, thats per core temp, if you look at the higher temp its the socket temp..

also what bios you running? get the latest bios and dont waste your time on the older versions.... they suck... the 0905 bios is real stable and the clocks prove it.

 

[exodusprime1337]

i've got 0905 and the 19c is virtually impossible as that's 5c below ambient in the room, just water no tec here, it seems stable, it just sucks that i can't read the core temps, they're definately wrong, the crosshair 4 says the cpu socket temp is 36 right now, and teh core temps say 22.. definately a dfference.

fullinfusion, you have a 1090t and crosshair, whats the difference bettween your core temp ont he 1090t and the bios temp at idle and load?

 

[Corduroy_Jr]

nothing wrong with that temp, thats per core temp, if you look at the higher temp its the socket temp..

also what bios you running? get the latest bios and dont waste your time on the older versions.... they suck... the 0905 bios is real stable and the clocks prove it.

max nb/ht
nb 1.2750v ht 1.38v

 

[fullinfusion]

i've got 0905 and the 19c is virtually impossible as that's 5c below ambient in the room, just water no tec here, it seems stable, it just sucks that i can't read the core temps, they're definately wrong, the crosshair 4 says the cpu socket temp is 36 right now, and teh core temps say 22.. definately a dfference.

fullinfusion, you have a 1090t and crosshair, whats the difference bettween your core temp ont he 1090t and the bios temp at idle and load?

never really checked it... if I had to guess (not really) but an educated guess Id say you want to offset the temp by +6c for idle. As for load thats were it gets tricky... Im guessing under load the offset will be roughly +3 to +4c

Im running Ultimate Drfrag atm so I cant hop into the bios to check... I will let you know when it's gone mate.

 

[fullinfusion]

Exodus I went into the Bios and it was +1c higher than what cpuid hardware monitor was reading... hope that helps ya

 

[exodusprime1337]

never really checked it... if I had to guess (not really) but an educated guess Id say you want to offset the temp by +6c for idle. As for load thats were it gets tricky... Im guessing under load the offset will be roughly +3 to +4c

Im running Ultimate Drfrag atm so I cant hop into the bios to check... I will let you know when it's gone mate.

thanx, i finally got a board, and can get this thing to post at 4.5Ghz, i wanna put mine up against you and cdawall, but not yet lol. need to make sure i'm not frying the chip lol

 

[fullinfusion]

thanx, i finally got a board, and can get this thing to post at 4.5Ghz, i wanna put mine up against you and cdawall, but not yet lol. need to make sure i'm not frying the chip lol

PIx lol?

Im happy your happy, but I think you still suck having a cherry chip

 

[fullinfusion]

thanx, i finally got a board, and can get this thing to post at 4.5Ghz, i wanna put mine up against you and cdawall, but not yet lol. need to make sure i'm not frying the chip lol

Hey zip me up your bios setting and send it to me, let me have a crack at it, I'll let ya know how it heats up sense Im not worried about temps

 

[exodusprime1337]

Hey zip me up your bios setting and send it to me, let me have a crack at it, I'll let ya know how it heats up sense Im not worried about temps

just got the board.. how do i zip them up.. simple settings at the moment though

21x multi
200fsb
1600mhz ram 1.9v 7,7,7,20,1t
1.51v cpu
1.25v nb @ 3000Mhz
all other voltages at stock
llc on for cpu off for nb