TPU's Nostalgic Hardware Club

[mxthunder]

Got the sims fired up today on my 2 daily driver retro rigs

 

[MaxiPro800]

92 days, as lifetime should be 3000 days...interesting, as health is OK.

Maybe you should make a back-up of the drive - just in case it has "software failure built in".

There's pretty much nothing to backup... drive came from a SUN machine as it seems, and had a unknown format all around (would show as RAW in Windows, haven't checked Linux as likely nothing of interest was there.)

I formatted it into NTFS and it will serve as a RAID0 or RAID1 storage drive with my Soltek SL-75FRN2-RL. It's either that and a 500GB Seagate or simply two Barracuda ST1000DM010. I wanna know the limits of that PDC20376 controller, as well as how long will that terrabyte rust spinner will troop on . It clearly had a rough life given the sibling drive that is similar in every aspect had finally killed itself by scratching its platters (I did nothing to cause that other than apply power.), as evidenced by slight hiccups in the spinup process.

 

[mxthunder]

Digging through some of my CPU collection. Need to switch things up in my retro rigs. Next on my list is a 486 or 386 build.
Also - part of a wafer my dad gave me from Intel about 25 years ago, along with a coppermine celeron ES. He has been inside many fabs over the years, his company sells equipment that can accuratly cut a GPU die/grind it, etc so it can be tested/viewed under microscope, etc.

 

[wolf]

Today's additions from affordable marketplace trawling.

Sapphire ATi Radeon HD4870 512M and;
Leadtek NVIDIA GeForce GTX 285 1G

 

[MaxiPro800]

To Be Continued (soon enough)

Y'all with the eagle eyes should figure where the gems are

 

[wolf]

Y'all with the eagle eyes should figure where the gems are

Do ym eyes spy an AGP 7800GS? finding higher end/later model AGP cards is getting harder and more expensive, that's a keeper right there!

 

[MaxiPro800]

Indeed, it's a 7800GS. Surprised you didn't mention the M-Audio Audiophile 192 card besides it tho

 

[wolf]

Indeed, it's a 7800GS. Surprised you didn't mention the M-Audio Audiophile 192 card besides it tho

Video cards are by far my biggest jam I consider myself an audiophile to some degree, and have some decent current gear but retro doesn't interest me in that regard too much. I have two or three Creative Audigy cards of varying model and spec around for my retro builds tho

 

[MaxiPro800]

I'm at it again

Remember when I said I got another P4Dual-915GL? Well, this is what came out of it. An HD4870, the Hitachi Ultrastar 1TB drive seen earlier, a few bits here and there, a Northwood HT 2.8GHz, to power whatever insanity I could come up with:

 

[Ruru]

Thinking of playing with HD 4890 CF for upcoming GPUjune

 

[TASOS]

Have any of you ever heard of this motherboard? AOpen AX4B-533 Tube socket 478 board with an onboard VACUUM TUBE! probably the wildest motherboard I've ever seen.
https://www.ebay.com/itm/285756636378

Spoiler: pic dump

View attachment 338334
View attachment 338335
View attachment 338336View attachment 338337

Yeap , known board the Aopen AX4B-533 tube

And here is his lost brother ... Aopen AX4GE-Tube G

Techware Labs - Reviews - AOpen AX4GE Tube-G

Techware Labs - Latest reviews of computer hardware, guides, and industry news.

www.techwarelabs.com

Quick nForce "meeting"

Left to find:

- Soltek SL-75FRN2-L/RL

Aahhh
The famous "Golden Flame" !!!

Add the AM2NF3-VSTA (which I happen to own) and you'll have practically the 3 best retro boards.

... make a place on your top 3

You forgot the Asrock ALiveDual-eSATA2

Huh. So all it took to get a upgrade on this Soltek was... just a mobile 2600+, a bit of FSB/multi fiddling... and 'ere we are
View attachment 341032

Still got no idea how to get past the "Unknown CPU Type" as the CPU string though. Anyone have any ideas?

Clearly a bios issue
I cant remember if it was fixed back then with somekind of modded bios.

You are running the latest available bios ?

 

[MaxiPro800]

Yes, it runs the latest 2.20 BIOS.

 

[DR4G00N]

Yes, it runs the latest 2.20 BIOS.

I'd just ignore it, it's probably just because it's an XP-M. (Unfortunately I don't have any XP-M's to test).
I mean on mine when I OC my Barton 2500+ it just says it's a 3200+.

 

[TASOS]

Yes, it runs the latest 2.20 BIOS.

Bios modders back then were doing a simple bios patch and instead of "unknown cpu typ" it reported "Athlon Mobile" or "Mobile cpu"

If it bothers you that much,you could try to contact someone from this forum thread (dont write in the thread,just pm them).

Socket 462 BIOS workshop

Hello, I'd like to separate some in-depth research considering sA that started in this thread: https://community.hwbot.org/topic/187148-a7n8x-e-deluxe-as-an-alternative-for-socket-462/ I'd like to discuss some sA and NF2 specific mods to: Make instructions for beginners Investigate other BIOS mod...

community.hwbot.org

I'd just ignore it, it's probably just because it's an XP-M. (Unfortunately I don't have any XP-M's to test).
I mean on mine when I OC my Barton 2500+ it just says it's a 3200+.

Yes , that's correct
Most of the boards of that era , did not have official support for the mobile chips.
Typical minor problem with no impact in anything.

 

[wolf]

Big haul today, I'm beside myself with multiple amazing additions to the collection, truly this seller didn't grasp what at least one of these cards was, if not multiple.

If anyone here is a soundcard buff and wants to tell me how good/useable/desirable any of these are, especially the older ones as I'm familair with Live! and Audigy, I'm happy to hear your insights.

Whole lot snagged for $50 AUD ($33 USD).

Pick of the litter for me is the Asus AGP-V6800 DDR - aka the GeForce 256 DDR, these alone seem to go for hundreds in working condition. Many other decent cards too like the Voodoo banshee and GeFCorce 2 MX .....Video cards, sound cards, modems, network cards, AM3 Mobo+Phenom 2 945.

 

[MaxiPro800]

Well, my Sunday's haul wasn't really anything to write home about... except for these two. ASUS CUSL2 kit (MB + SL52R CPU OC'd to 1200 + 512MB worth of SDR + cooler) and a XFX Geforce II MX400, under their former "Pine Tech" branding. MB originally came from a Maxdata OEM PC (it had a big Maxdata splashscreen), flashed to latest 1014.001 retail BIOS.

160FSB without me doing anything. I'm surprised it runs although it occasionally either crashes 98 with a HIMEM missing error or just freezes. I'll have to look onto where can I adjust the FSB.

Other stuff in the haul:

- ASUS K53SV and K53SD - former has i5-2410M+GT540M 2GB, latter has a i7-2670QM + GT610M 2GB. Both need some case elements, both have had their LCDs replaced by me as the old ones were shattered. K53SV needs a LCD bezel, keyboard and a HDD cover, K53SD just needs the HDD cover.
- PS3 phat CECHL03
- Xbox 360 Falcon w/ X810480-002 GPU (original Rhea revision, before the underfill fix)
- nJoy Agon 600 PSU - needs further troubleshooting - has had burnt BJTs in the primary side plus 2x burnt resistors. I get 5vSB out of it (and stable one at that because it uses a IC for 5vSB, not transistors)
- PS2 SCPH-50004a v10 - Papa Roach's roachfest inside, managed to salvage the mobo, its Sony KHS-400C laser and MC/controller ports. The rest went to trash, and the salvaged parts have been installed in place of a failed v9 (50004 without "a") mainboard.

 

[Courier 6]

just scored a free toshiba petium dual core E5800, 500gb HDD, 4 gb ddr3, dvd drive, card reader

 

[stinger608]

I mean on mine when I OC my Barton 2500+ it just says it's a 3200+.

I have a 2500+ mobile chip, that no matter what board I've installed it in, it always shows as a 3200+ chip.

 

[Trekkie4]

Digging through some of my CPU collection. Need to switch things up in my retro rigs. Next on my list is a 486 or 386 build.
Also - part of a wafer my dad gave me from Intel about 25 years ago, along with a coppermine celeron ES. He has been inside many fabs over the years, his company sells equipment that can accuratly cut a GPU die/grind it, etc so it can be tested/viewed under microscope, etc.


View attachment 342177


View attachment 342178View attachment 342179

Neat! Water jet cutting technology?

 

[TASOS]

I have a 2500+ mobile chip, that no matter what board I've installed it in, it always shows as a 3200+ chip.

Hmm , that chips is probably "taken care"
It might has it's bridges modded.

 

[Macro Device]

Accidentally obtained this bad boy. No idea if it's in working condition, no AGP motherboards to test it.

 

[mxthunder]

Neat! Water jet cutting technology?

Not water jet, but specialized cutting wheels. Cutting machines to get approximation, then polishing machines to fine tune where in the sample they need to see with SEM
Danish company

Accutom cutting equipment | Struers.com

Highly accurate cut-off machines with a maximum workpiece size of 50x130mm. Optimized for precision and ease of use, Accutom machines include materialographic and metallographic cutting and grinding in one machine for high accuracy and productivity.

www.struers.com

 

[Voodoo Rufus]

I bought an XFX 6800XT AGP with a sticking fan for a decent price. I didn't Youtube how to take a fan apart to lubricate it and ended up breaking it. I can't seem to find a suitable replacement for it, and the fan is integral to the plastic shroud ducting the airflow to the heatsink. What are my options without fabbing up something custom?

 

[meatwar]

Full piece of plastic shroud... this guy as done a "radical" mod to it...lol

 

[overclockedamd]

DFI LANparty NF4 SLI-DR collectors with my Opteron 170 golden sample god I miss that rig. Had it with a sick Koolance external AIO and gold plated Koolance CPU, GPU and Northbridge blocks.