Your PC ATM

[pantherx12]

dont use too big ones... they mostly use hose much bigger than 1/2.

It be more fun and games trying to make it work



By the by, the old Zalman CNPS9500 all copper coolers perform?

Because they're really damn cheap over here.

 

[Chicken Patty]

2 Pumps. one is in my rig, the outlet from it, is the only green hose. from there,the freshly heated water travels to the t-bow, where it joins the slower,much colder water from the monster-rad, to run into the smaller,high flow Rad, where it gets cooled again, with a different rad layout. it then splits in another t-bow, and runs back in the rig,OR gets pumped in the monster rad, by the thermaltake pump on the pics, and retravels.

I got a headache

 

[p_o_s_pc]

It be more fun and games trying to make it work



By the by, the old Zalman CNPS9500 all copper coolers perform?

Because they're really damn cheap over here.

not all that great only a few C better then the Stock Intel cooler
BTW GOOGLE IS YOUR FRIEND!!

 

[Velvet Wafer]

I got a headache

its like a superhero, growed from a failed experiment. i somehow accidently fitted the bows wrong (should have done it the other way around)
but i kept it, its so awesome to look at it,while it bleeds (while feeding it distilled, it needs approx 3,2 litres, with a !250ml!Res)

not all that great only a few C better then the Stock Intel cooler
BTW GOOGLE IS YOUR FRIEND!!

Pos, im at 38-41 max load at night (currently 27 hours stable at 3.902mhz,1.488) (a few posts above)

 

[Chicken Patty]

it needs approx 3,2 litres, with a !250ml!Res)

I don't think you have seen the size of the rad yet heh?

 

[Velvet Wafer]

I don't think you have seen the size of the rad yet heh?

more like a direct pointing towards it

 

[Chicken Patty]

more like a direct pointing towards it

Where did you get that rad at again? From a car or something?

 

[Velvet Wafer]

Where did you get that rad at again? From a car or something?

its from a co-workers car, an old Renault. due to it beeing 25 years old, it somehow managed "to crinkle", and broke on the main inlet (the big one). i applied 2 layers of glass fiber epoxy,with only 2 bar,it was leak free, but now it drip leaks a little,with the second pump added. i fixed that with a sock for the week, i would have had to shut it down, to repair it, but the crunching battle didnt allowed it. now i have time, to do a little service to it

 

[pantherx12]

not all that great only a few C better then the Stock Intel cooler
BTW GOOGLE IS YOUR FRIEND!!

Yeah but so are the folks on TPU, and I prefer to interact with other people

 

[Velvet Wafer]

Yeah but so are the folks on TPU, and I prefer to interact with other people

sry i have not even seen it till now^^ after going dual, i went water very soon.

 

[Chicken Patty]

its from a co-workers car, an old Renault. due to it beeing 25 years old, it somehow managed "to crinkle", and broke on the main inlet (the big one). i applied 2 layers of glass fiber epoxy,with only 2 bar,it was leak free, but now it drip leaks a little,with the second pump added. i fixed that with a sock for the week, i would have had to shut it down, to repair it, but the crunching battle didnt allowed it. now i have time, to do a little service to it

Dude you have to be one of the craziest and most bizarre person I've ever talked to. But that's what makes you who you are, and we love you here at TPU

 

[3volvedcombat]

Speaking of blurry images. lol... Velvet that is some SIIICK sh!t. I'm in love. These 800D make it too easy

http://img.techpowerup.org/091111/IMG_0449761.jpg
http://img.techpowerup.org/091111/IMG_0451.jpg

P.S. That's a nice bong!

What you need to do, Is slap 3 HD 5870's(matching colors) 6 sticks of Corsair Dominator GT red fin bastards, and Maybe a Dim RED LED, and put your loop in there with red color die, and travel the pro road.

jk jk whatever you do, do it well , yay for 800D

 

[Velvet Wafer]

Dude you have to be one of the craziest and most bizarre person I've ever talked to. But that's what makes you who you are, and we love you here at TPU

the grumbly Germans hate me normally. i myself believe, im only part human.there is something... "alien" about me, and in this case, we hadnt even talked about my "special" abilities. and that i have a "mission" to forfill.
but nevermind!
i love this community! nice people, interesting themes/threads /heartful administration /Boss is a "rare,worthful" German/ possibilities to get masses o´ hardware with the money, i otherwise may have only bought a crap card here,in our shop, or even in my internet shops.
Techpowerup is Knowledge,Awesomeness, and Peace, in my opinion.
thanks to you all!
You welcomed me with open arms,David! i shall not fail thru uncorrectness!

 

[Chicken Patty]

the grumbly Germans hate me normally. i myself believe, im only part human.there is something... "alien" about me, and in this case, we hadnt even talked about my "special" abilities. and that i have a "mission" to forfill.
but nevermind!
i love this community! nice people, interesting themes/threads /heartful administration /Boss is a "rare,worthful" German/ possibilities to get masses o´ hardware with the money, i otherwise may have only bought a crap card here,in our shop, or even in my internet shops.
Techpowerup is Knowledge,Awesomeness, and Peace, in my opinion.
thanks to you all!
You welcomed me with open arms,David! i shall not fail thru uncorrectness!

AMEN TO THE ABOVE

 

[Binge]

With a nice bowl of 'greens'

Binge, are you putting a loop inside the case? Whats the rest of the parts list?

No water, but possibility for water in the future. I had to unload the expensive stuff in order to make some holiday joy.

 

[mrsemi]

I snapped a few pics of my water cool setup. Nothing too clean or too fancy yet, but a good start.

 

[King Wookie]

It be more fun and games trying to make it work



By the by, the old Zalman CNPS9500 all copper coolers perform?

Because they're really damn cheap over here.

Had one on my mom's pc. Not that great. Replaced it with a cheap Hyper TX3, which is quieter and temps look slightly better.

So now I'm sitting with a redundant copper 9500. Hmm. Maybe time to experiment with better fan/s on it.

 

[pantherx12]

Mrsemi you should reverse that fan on the 120mm exhaust area , so it blows through the rad and still functions as an an exhaust.

Hell I'd do it with all the fans if it were mine, I'd prefer lower temps.



Edit: Do it, I was thinking of buying one just because their cheap and messing with them.

2x 90cfm 120mm fans for example.

Perhaps tape mod so less air escapes before it gets a chance to do its job.

 

[Thrackan]

Mrsemi you should reverse that fan on the 120mm exhaust area , so it blows through the rad and still functions as an an exhaust.

Hell I'd do it with all the fans if it were mine, I'd prefer lower temps.



Edit: Do it, I was thinking of buying one just because their cheap and messing with them.

2x 90cfm 120mm fans for example.

Perhaps tape mod so less air escapes before it gets a chance to do its job.

He might have done it to cool the NB/memory. That would be my first hunch

 

[pantherx12]

Yeah and the rear exhaust is to high, especially with the rad there.

The fan he's using actually pulls in air pretty quickly, got the same one, if he had it facing the other way it be taking all the hot air away and still cool his componants.

+ assuming he has a front intake its a much cleaner air flow, rather then bouncing from one side of the case to the other and eventually leaving through the roof passively.

 

[King Wookie]

Edit: Do it, I was thinking of buying one just because their cheap and messing with them.

2x 90cfm 120mm fans for example.

Perhaps tape mod so less air escapes before it gets a chance to do its job.

I've looked, and 92mm fans are the same size as the cooler. It currently uses an 80mm fan.
My thinking is 2 92mm fans in push/pull. Could then try the tape mod to see if it helps. Seems to have had a bit of success on the 9900 with that.

 

[pantherx12]

The fan is supposed to be 92 mm, I feel so betrayed by their marketing team XD

 

[King Wookie]

The fan is supposed to be 92 mm, I feel so betrayed by their marketing team XD

ERK! You are right.
Have it in front of me. It is a 92mm fan, so 120mm fans would do the trick.

EDIT: Memory clearance is going to be an issue. Looks like there's maybe 25mm space if you slap a 120 on the front.

 

[pantherx12]

Nice, should be enough for me.

By the by, just got my RMA back from gigabyte, really pissed off, they done NOTHING.

Doesn't even power on ( same problem it had before) I think they just replaced the cmos battery.

 

[King Wookie]

Seems service has become an ideal, not a reality.