Lets see if I can get a better rating than what I had before. I put a lot of work in to this case. I am now getting way better temps with the new fans, plus I added another for 5 total. On top of that it is way more quiet then it was before. I think cutting the fan grills out, modding the filters, and sealing the chambers really helped with the temps and cooling, as for the noise, the fan controller really helps with that, also the dbb fans are way better than the stock fans.

Great sys and spec im impressed 9/10

NeohazardGreat sys and spec im impressed 9/10

thank you!

Nice 1st!!! Very tidy.

First build ever?! 10/10 for sure, absolutely wonderful!

Very Nice job, especially for your first. I'll give you 9/10. Fair or not, you lose a point for the miserable placement of the psu's in those p182 cases. Damn, I don't miss mine, especially with a modular psu.

pentastar111Nice 1st!!! Very tidy.

thanks!

erockerFirst build ever?! 10/10 for sure, absolutely wonderful!

thanks! yes, this is the first time ive built a computer, all past pc's were dells :(
I could'nt have done it with out you guys.

PauliegVery Nice job, especially for your first. I'll give you 9/10. Fair or not, you lose a point for the miserable placement of the psu's in those p182 cases. Damn, I don't miss mine, especially with a modular psu.

you are right about the PSU, it's a pain in the ass to run those cables and keep them looking neat. And not easy plugging in the modular cables with the psu installed.

nice 1st build, v good specs.... clean and tidy! 7/10

Just beautiful!9/10

tzitzibpnice 1st build, v good specs.... clean and tidy! 7/10

thank you!

zvonjolaJust beautiful!9/10

thanks!

I like it. but is the rubber trim too big or did you mess up on cutting the hole?

- Christine

mdashootthanks!

plz rate mine at:www.techpowerup.com/gallery/1213.html

calvary1980I like it. but is the rubber trim too big or did you mess up on cutting the hole?

- Christine

ummm, the rubber trim is fine and the hole is cut out perfect. It might look odd because I was realy close when I shot the pic. The tower was on the desk and I forgot to get that shot so I held the cam behind it in between the wall and tower and shot.

it looks crooked and sided instead of round regardless you shouldn't be using trim that size.

- Christine

calvary1980it looks crooked and sided instead of round regardless you shouldn't be using trim that size.

- Christine

I dont know what you mean by crooked and sided, if your talking about the hole for the fan mayabe you should look at a pic of an antec p182 case and you will see why. and the trim is the same as this


and last, where is your case mod?

mdashootI dont know what you mean by crooked and sided, if your talking about the hole for the fan mayabe you should look at a pic of an antec p182 case and you will see why. and the trim is the same as this


and last, where is your case mod?

and again, if I wasnt so close when I shot the pic it wouldnt look so big, I actually did a better job than the guy did in the pic above. He pieced his trim together, I only have one break, and also the case in the pic above is a P180.

oh, and I ordered the XFX GeForce 8800gt today, so that will be in some time next week.

Quality Build M8
I Like It
Best Antec Ive Seen In A While

nice rig for shure ;)

6/10

throw some paint on the inside

$quaddie-$quirrelQuality Build M8
I Like It
Best Antec Ive Seen In A While

thanks!

looking real nice bro i like it alot.....i agree with painting the inside black that will make it look sleek and sexy lol......what fan controller is that if you dont mind me asking?

Da iLLeZt TL973looking real nice bro i like it alot.....i agree with painting the inside black that will make it look sleek and sexy lol......what fan controller is that if you dont mind me asking?

thanks, and the fan controller is a Sunbeam Rheobus-Extreme 6-Channel

Nice job of your 1st build. You get an 8 out of 10 from me. You were borderline 7, but I decided to round you up.

Cable managment is the only thing holding you down from a 9. Yes, your rig is nice and neat... but you have to accept that a pretty high bar has been set by other rigs on this site.

9/10 Gr8 effort. I would consider painting inside black as well then 10/10

EnergyFXNice job of your 1st build. You get an 8 out of 10 from me. You were borderline 7, but I decided to round you up.

Cable managment is the only thing holding you down from a 9. Yes, your rig is nice and neat... but you have to accept that a pretty high bar has been set by other rigs on this site.

understood, I will greatly accept an 8

Wetbehindtheears9/10 Gr8 effort. I would consider painting inside black as well then 10/10

thanks! I like the silver look on the inside of the case but I think black would look good. If I were to do the inside black I think I would buy the other P182 and put my side panels and front door on it.

mdashootand last, where is your case mod?

She is pointing out that the trim does look odd shaped and bulky in ur photo. The second shot from farther away does look nicer, I agree with her point.

Its almost harder to take picts than the modding itself for me.

(nice job so far on the comp)

Def worth a 9/10 that.......well done! I have the 182.....dont look quite as good as that though.........7/10 for mine :(

MKmodsShe is pointing out that the trim does look odd shaped and bulky in ur photo. The second shot from farther away does look nicer, I agree with her point.

Its almost harder to take picts than the modding itself for me.

(nice job so far on the comp)

yeah, I couldnt get a good shot because I forgot to take that pic and the comp was already set up and I didnt feel like moving it around so I had to reach behind it and shoot blind, but it does look normal from the right distance. thanks for the vote.

edit: just realized who you were MK, what a compliment "nice job so far on the comp" coming from you, I've seen your mods, excellent work