AMD's first wave of FX series high performance desktop processors will hit stores on 19 September, 2011, according to industry sources. On that day, AMD will launch two 8-core models: FX-8100 and FX-8150; a 6-core model, the FX-6100; and a 4-core part: FX-4100. The much yapped about "FX-8130P" that has been a CPU-Z screenshot favourite, is not a part of AMD's finalized lineup. Earlier it was rumored that models with the "P" brand extender were unlocked parts, but now it's emerging that all parts in the FX series are unlocked. Detailed specifications are tabled below.

In the first quarter of 2012, AMD plans its second round of product launches, which consist of faster models that display existing ones from their price-points. The FX-8170 will displace the FX-8150, the FX-8120 displaces FX-8100; FX-6120 displaces FX-6100; and FX-4120 displaces FX-4100. In the meantime, AMD is working with motherboard vendors to ensure adequate propagation of socket AM3+ motherboards, and more importantly, for DDR3-1866 MHz memory to become more affordable, since FX processors yield the most optimal performance with that memory speed.

ENERMAX is proud to announce the release of all new CPU Cooler line, ETS-T40 series. It has world leading thermal resistance value down to an incredible 0.09°C/W. With patented VGF, SEF, HDT, and VEF design, plus ENERMAX renowned Twister-bearing fan, ETS-T40 can easily cool down hot-spoil heavy-duty CPU without adding system noise. The unique spoilers design redirects the air through the windless area behind the heat pipes of 52 fins to maximize air convection rate and remove the heat that conventional design cannot reach.

ASRock unveiled the first Fatal1ty-branded AMD platform product, a premium motherboard based on the AMD 990FX chipset, ready for AMD FX series processors in the AM3+ package. The board sports the signature Fatal1ty color scheme of black and red, and is geared for high-end gaming PCs. The AM3+ socket is powered by a 14-phase digital PWM power design, which is ready for even 140W chips. It is wired to four DDR3 DIMM slots supporting dual-channel DDR3 with speeds of over 2000 MHz by overclocking.

Two of the unique selling points here is ASRock Fatal1ty XFast USB, a pair of low-latency and high-polling USB ports to plug in your gaming mouse and keyboard; and XFast LAN, which is a software layer that works to lower latency and prioritize internet bandwidth to applications. To top it off, there's a Fatal1ty-themed UEFI setup program that features some extra advanced settings.

On several earlier articles like this one, we were versed with the model numbers and even possible prices of AMD's next-generation FX series desktop processors, but the clock speeds stayed under the wraps, that's until a table listing them out was leaked. AMD's FX-series consists of eight-core FX-81xx parts, six-core FX-61xx, and quad-core FX-41xx parts, probably harvested out of the Zambezi silicon by disabling modules (groups of two cores closely interconnected with some shared resources). Most, if not all, FX series chips have unlocked multipliers, making it a breeze to overclock them. All chips come in the AM3+ package, feature 8 MB of L3 cache, and 2 MB L2 cache per module.

Leading the pack is FX-8150, with a clock speed of 3.6 GHz, and TurboCore speed of 4.2 GHz, a 500 MHz boost. The next chip, FX-8120, has a boost of close to a GHz, it has a clock speed of 3.1 GHz, that goes all the way up to 4 GHz with TurboCore. This will be available in 125W and 95W TDP variants. Next up is the FX-8100, with 2.8 GHz clock speed, that goes up to 3.7 GHz, another 900 MHz boost. The scene shifts to 6-core chips, with FX-6120, no clock speed numbers were given out for this one. FX-6100, on the other hand, is clocked at 3.3 GHz, with 3.9 GHz Turbo. The FX-4100 is the only quad-core part with clock speeds given out by this source: 3.6 GHz, with a tiny 200 MHz boost to 3.8 GHz. You can see that there is no pattern in the turbo speed amounts specific to models, and hence we ask you to take these with a pinch of salt.

Japanese cooling expert Scythe is officially confirming the compatibility between its own CPU Coolers and new sockets FM1 and AM3+. Product Development in the IT Industry is constantly evolving and in some cases implies new interfaces as well as sockets.

Brand new Mainboards for AMD A Processor Series are available on the market since a couple days. In order to assure a safe operation a proper CPU-Cooler is required, where Scythe is offering a wide spectrum of products suiting everyone's requirements. All current Scythe CPU Coolers models are therefore already compatible to the new to AMD sockets FM1 and AM3+. Users can either utilize the Scythe CPU Coolers they own or get a new CPU Cooler from the shops as no extra clips or mounting kits are required.

Prolimatech released a new variant of its iconic Megahalems CPU heatsink, called the Black Series Megahalems. With the same exact dimensions as the original at 130 x 158.7 x 74 mm (LxWxH), the new variant uses black colored aluminum fins. The coating doesn't make for a polished, glossy surface, but a grainy one, which increases surface area. The design remains the same: six nickel-plated copper heat pipes pass through a base, conveying heat to two aluminum fin stacks that are arranged along each arm of the U-shape the heat pipes make. The Black Series Megahalems is compatible with all the current CPU socket types, including AMD AM3+, AM3, AM2+, AM2; Intel LGA1155, LGA1156, LGA1366, and LGA775. The Prolimatech Megahalems Black Series is listed on Caseking.de for €54.90.

Japanese cooling expert Scythe is announcing today the successor of popular Mugen 2 CPU Cooler. Mugen 2 CPU Cooler was awarded many times and is well known world-wide to mainstream users, Overclocker and Enthusiasts. During the development process main focus was set on improvement of performance and mounting mechanism as well as shrinking the heatsink dimensions. New Mugen 3 CPU Cooler is ready to take on the legacy.

While optimizing the performance the whole heatsink design of Mugen 3 CPU Cooler was re-worked which resulted in creation the improved fin-structure M.A.P.S. (Multiple Airflow Pass-Through Structure). Enhancements were achieved by reducing the aerodynamic resistance as well as improving of the overall heatsink stability. Furthermore Mugen 3 is equipped with total of six high-quality copper-heatpipes where the predecessor had only five. Typical for Scythe is the excellently processed and flat surface of the copper base which was refined by a thin nickel layer to prevent corrosion.

NVIDIA today released its latest version of the GeForce software suite, version 275.50 BETA. With this release, NVIDIA enables SLI support on AMD socket AM3+ platform. The driver enables SLI multi-GPU technology certified AMD 990FX, AMD 990X, and AMD 970 motherboards. Keep in mind, not every AMD 9-series chipset-based motherboard will run SLI, only certified ones, just like not every Intel 5-series and 6-series chipset based motherboard features SLI. Look for the SLI logo when buying the motherboard.

Besides this major change, GeForce 275.50 improves 3D Vision performance on Duke Nukem Forever. It adds new 3D Vision profiles for Duke Nukem Forever Demo, Mars benchmark, Rise of the Immortals, and Rusty Hearts. 3D Vision profile for Alice: Madness Returns is improved. This is a BETA release, use of which is not covered by product warranties. SLI support on AMD, and all features in this release will be carried forward by future WHQL-signed driver releases.

DOWNLOAD: NVIDIA GeForce 275.50 BETA

AMD's latest AM3+ processors are a shot in the arm for PCs, delivering start of the art processing at unmatched performance. ASRock superior AMD 9 series motherboards have been designed to support the new-gen AM3+ processors, while still retaining backward compatible with AM3 processors and unprecedentedly implementing support for SLI technology. To bring the best kit to users, ASRock has thrown everything you could want from the new-gen AMD 9 series motherboards. The innovative features include the ASRock signature XFast USB, On/Off Play Technology, Graphical UEFI, All-in-one AXTU program, and so on.

AMD today launched its 9-Series chipset line-up today, helping PC builders to develop next generation high performance desktop platforms. The company also unveiled its 2011 HD Tablet Platform, based on the AMD Z-Series Accelerated Processing Unit (APU), enabling vivid media display and content creation capabilities for the fast-growing market of Microsoft Windows-based tablets. These new AMD products are designed to enable more immersive digital experiences for the PC and tablet markets.

"As consumer appetites for more compelling, lifelike visual experiences increase, there is greater need for high performance, smooth, vibrant graphics as well as unparalleled computing power," said John Taylor, product marketing director, AMD. "From tablets to desktops, AMD is making powerful computing accessible to everyone."

ASUS, a global leader in the new digital era, today announced a number of exciting new products for high-performance gaming PCs to further expand its Republic of Gamers (ROG) range. Established five years ago, ROG is committed to developing the ultimate high-performance hardware.

"The ROG philosophy is based on the core ideals of class-leading performance, innovative user controls and gamer-focused design," said ASUS Vice President and GM of Worldwide Sales, Jackie Hsu. The products announced today not only hold true to these ideals, but also introduce a host of new innovations that push high-end PC performance to even greater extremes.

Elitegroup Computer Systems (ECS), the world's leading motherboard, graphics card, barebone system, and notebook manufacturer is pleased to announce the latest AMD AM3+ support motherboard - ECS Black Extreme A990FXM-A. Coming with unbelievable gaming power, ECS Black Extreme A990FXM-A is going to bring about the storm of next gaming generation.

ECS Black Extreme A990FXM-A motherboard support 8-Core AMD CPU with AM3+ socket enables users to experience the most-core CPU of next generation. ECS Black Extreme A990FXM-A also supports 3-way AMD ATI CrossFireX and even 3-way NVIDIA SLI technology to support NVIDIA graphic cards to empower graphics ability firing up your gaming accelerating speed. Moreover, ECS A990FXM-A supports DDR3 2133(OC) with two sets of dual channel architecture up to 32GB.

Biostar is keeping a low profile with high-end motherboards, these days. It's been a long while since the company released its last TPower-branded motherboard, but has been pushing its 'value' TSeries motherboards into every segment. One such offering for the AMD socket AM3+ platform is the Biostar TSeries TA990FXE. Based on the AMD 990FX + SB950 chipset, this board packs a lot of high-end styling with its heatsinks and components load-out. It packs a 4+1 phase VRM to power the AM3+ socket, and dual-channel DDR3 memory. Current generation Phenom II, and future FX Series processors are supported.

Expansion slots include four PCI-Express 2.0 x16 (x16/x4/x16/x4), and two PCI. There are five internal SATA 6 Gb/s ports, with the sixth one being assigned as eSATA. Most other connectivity is fairly standard for this category, you've got 8-channel HD audio, four USB 3.0 ports (two by header), and gigabit Ethernet. The board features standard AMIBIOS, and some overclocker-accessible features such as power/reset switches and diagnostic LED.

Backed by one of the biggest OEMs in the industry, PC Partner, Sapphire does have some engineering potential to speak of. The AMD Radeon graphics card manufacturer has, on and off, tried to make inroads into the the motherboard market. With the 990FX-N, Sapphire is continuing its high-end Pure Black series. While NVIDIA SLI support isn't denied anymore for the AMD chipset platform, for political reasons (such as NVIDIA restricting AMD platform SLI licences to only those motherboard vendors who already had them for the Intel platform, cutting out Sapphire), this board doesn't support SLI. It shouldn't bother you if you own AMD Radeon, this board has sufficient PCI-Express connectivity to even allow 4-way CrossFireX.

The Sapphire Pure Black 990FX-N starts with a 10-phase VRM to power the AM3+ socket supporting AMD's new FX series processors, it is wired to four DDR3 DIMM slot supporting dual-channel DDR3 memory with speeds of over 1866 MHz. Expansion is an all PCI-Express affair, with five PCI-Express 2.0 x16 (of which one is x4), and two open-ended PCI-E x4. Storage connectivity includes eight SATA 6 Gb/s internal ports, and eSATA. Apart from that, the board features 8-channel HD audio with optical and coaxial SPDIF output, dual gigabit Ethernet, two USB 3.0 ports, and Bluetooth.

MSI is approaching the socket AM3+ performance platform with two motherboards based on the AMD 990FX chipset, at the very top is the 990FXA-GD80 detailed earlier. Next to it, is the 990FXA-GD65, which is designed to occupy a sub-$200 price point. The GD65 depends entirely on the chipset for its features, with very little 3rd-party features. It uses a full-fledged 10-phase VRM to power the CPU. To add electrical stability, a 6-pin PCI-E power connector is in place, if discrete graphics cards that rely on slot power, are used. The 990FX northbridge gives out two PCI-Express 2.0 x16 ports, which are wired to two PCI-Express 2.0 x16 slots that run at full-bandwidth all the time. Other expansion slots include four PCI-E x1 and a legacy PCI.

All six SATA 6 Gb/s ports from the SB950 southbridge are assigned as internal ports, while there are no eSATA ports on the rear panel, MSI might bundle an eSATA bracket that extends two of the six internal ports as eSATA. This way, MSI saved the cost of using an additional third-party SATA controller. Other connectivity includes 8-channel HD audio driven by Realtek ALC892 CODEC that supports optical and coaxial SPDIF output; and two USB 3.0 ports on the rear panel driven by an NEC/Renesas-made controller. There's little more to this board than that, for overclockers. There is a rear-panel CMOS reset button, and "Military-grade" components. Instead of using UEFI firmware with its GUI-driven setup program ClickBIOS, MSI used conventional BIOS with a hack that allows it to boot from volumes greater than 2.2 TB in size. MSI also includes BIOS Code Unlocked Technology, which lets users unlock disabled cores on certain CPUs.

Gigabyte's top-tier socket AM3+ motherboard lineup is shaping up in a big way, with a bleeding-edge GA-990FXA-UD7 at the top of the pile. Gigabyte has yet another motherboard to cater to fans of the AM3+ platform, the GA-990FXA-UD5. The UD5 features a more conventional-looking component layout, with the northbridge located where it usually is. You still get the 10-phase VRM from the UD7, the black Ultra Durable 3 PCB, but this board is designed for multi-GPU setups with up to 3 graphics cards: supporting 3-way SLI and CrossFireX.

Expansion slots include five PCI-Express 2.0 x16, of which three (slots 1,3,5) are PCI-Express 2.0 wired to the AMD 990FX northbridge, with electrical configurations of x16/x16/NC or x16/x8/x8. Slots 2 and 4 are electrical x4, wired to the SB950 southbridge. Other slots include a PCI-E x1, and a legacy PCI. Storage connectivity is similar to that of the UD7, with eight SATA 6 Gb/s internal ports, a power-eSATA, and a normal eSATA.

Here are some of the first proper pictures of ASUS ROG Crosshair V Formula motherboard, a set of press-shots leaked to the Czech press, which has since been retracted. The ROG Crosshair V Formula comes in two packages, with and without ASUS Thunderbolt card (an addon card by ASUS that provides Bigfoot Killer NIC and Sound Blaster X-Fi hardware-accelerated audio). The Crosshair V made its first appearance with a box-shot disclosure by NVIDIA announcing SLI on AMD chipset motherboards; later a table listing out specifications of some of ASUS' fist socket AM3+ motherboard was published.

The Crosshair V Formula is a socket AM3+ motherboard based on AMD 990FX + SB950 chipset, supporting AMD's upcoming FX-series processors based on the Bulldozer architecture. It combines the best features ASUS has to offer, targeting both gamers and overclockers. The AM3+ socket is powered by a strong 10-phase Digi+ Extreme Engine VRM, it supports dual-channel DDR3 memory with speeds of over DDR3-2133 MHz. Expansion slots include four PCI-Express 2.0 x16, which configure as x16/x16/NC or x16/x8/x8, with the fourth slot being electrical x4, wired to the southbridge. NVIDIA 3-way SLI and AMD CrossFireX are supported.

A picture of ECS' top of the line socket AM3+ motherboard also made it to the web. Called the ECS Black Series A990FXM-A, the board expands a little on the chipset's features. Its component layout is similar to most AM3+ motherboards we've seen, with the AMD 990FX northbridge being located south of the CPU VRM area, sharing heat with it over a common heatsink. The CPU socket is wired to four DDR3 DIMM slots supporting dual-channel DDR3-1866 standard, and DDR3-2133 MHz by overclocking.

Expansion slots include three PCI-Express 2.0 x16 (x16/NC/x16 or x16/x8/x8), supporting NVIDIA 3-way SLI and AMD CrossFireX. Other expansion slots include two PCI-E x1 and a PCI. Storage connectivity includes six internal SATA 6 Gb/s from the southbridge, and a third-party SATA/IDE controller that gives out an internal IDE connector and two eSATA 3 Gb/s ports. Other connectivity features include 8+2 channel HD audio, dual gigabit Ethernet, four USB 3.0 ports (two by header), and Bluetooth. There are some overclocker-friendly features, such as onboard power/reset, rear-panel CMOS clear, onboard PC speaker, diagnostic LED display, and long 8-pin EPS connector for accessibility. Like most other boards, the ECS A990FXM-A is expected to be out in mid-June.

After displays of socket AM3+ motherboards based on AMD 990FX chipset, by ASUS, and MSI were pictured by various tech sites, it's quite expected of Gigabyte's offering to somehow make it to the web. Gigabyte is going full guns with its top AM3+ motherboard, with the GA-990FXA-UD7. Based on the same Black+Graphite+Gold color scheme as the socket LGA1155 "UD7" models based on Intel P67 and Z68, the GA-990FXA-UD7 comes with zesty dimensions that almost make it an EATX form-factor board, although it's not. The AM3+ socket is powered by a 10-phase VRM that is cooled by a long heatsink that appears to be contiguous with the northbridge heatsink, which in turn shares heat with the southbridge over a heat pipe. The socket is wired to four DDR3 DIMM slots supporting DDR3 frequencies in excess of 1866 MHz.

Gigabyte utilized each of the seven expansion slots, packing in six PCI-Express 2.0 x16 neatly spaced out to support NVIDIA 4-way SLI and AMD 4-way CrossFireX; two out of six slots two are electrical x4, wired to the southbridge. A legacy PCI slot is thrown in, just in case you hate to throw away that expensive PCI sound card that still sounds great. Storage connectivity includes eight internal SATA 6 Gb/s ports, six from the SB850 southbridge, and two from a third-party controller. There are two eSATA ports, of which one appears to be power-eSATA.

Earlier referred to as "Big Bang Conqueror", MSI's next top-end AMD platform motherboard has emerged under its final name, 990FXA-GD80. The socket AM3+ motherboard that supports AMD's upcoming FX series processors, is based on the AMD 990FX + SB950 chipset. The CPU is powered by a 10-phase VRM that makes use of tantalum-core capacitors, and SFC chokes (that don't whine), driver-MOSFETs (DrMOS). Expansion slots include four PCI-Express 2.0 x16, supporting NVIDIA SLI and AMD CrossFireX; two PCI-E x1, and a PCI.

Storage is mostly care of the southbridge, all its six SATA 6 Gb/s ports are assigned as internal ports; a third-party SATA 3 Gb/s controller handles rear-panel eSATA. There are two USB 3.0 controllers, driving two ports on the rear panel, and two via an angled internal header. Other connectivity includes 8+2 channel HD audio with THX TruStudio Pro support, gigabit Ethernet, and FireWire. A number of MSI-exclusives are bundled, including MSI-designed graphical UEFI setup program (click BIOS), and OC Genie II that is overclocking with side-wheels. Expect the MSI 990FXA-GD80 to be out in mid-June, at a US $175~$250 price range.

With the socket AM3+ platform, ASUS wants to rally around its top motherboard brands, including Republic of Gamers (ROG), with the ASUS Crosshair V Formula, and the The Ultimate Force (TUF) Sabertooth 990FX, for AMD's next top of the line 990FX chipset that is designed to run up to four discrete graphics cards. The 990FX Sabertooth keeps up with the color scheme of the other TUF-series members. It boasts of highly durable components. The AM3+ socket is powered by a 10-phase Digi+ VRM. It is wired to four DDR3 DIMM slots supporting dual-channel DDR3-1866 MHz memory, and connects to the 990FX chipset over a HyperTransport 3.1 link.

Expansion slots include four PCI-Express 2.0 x16 (configurable as x16/x4/x8/x8, x16/x4/x16/NC, depending on how they're populated); The electrical x4 slot is wired to the SB950 southbridge, and is placed there to hold PCI-Express SSDs. One each of PCI-E x1 and PCI make for the rest of the expansion. Storage connectivity includes six internal SATA 6 Gb/s ports supporting RAID, two internal SATA 3 Gb/s from a third-party controller, one power-eSATA/USB combo, and one normal eSATA on the rear panel.

With no new GPUs in the works by either of the two main manufacturers, AMD and NVIDIA, this year's Computex event isn't going to be a very big exhibition of graphics cards. Instead, Intel's LGA2011 and AMD's AM3+ platforms are going to steal the show. It does leave graphics card manufacturers some attention, if they come up with something really out of the ordinary. PowerColor wants to be one of them. Flexing its in-house engineering muscle, the company is readying a dual-GPU graphics card that makes use of two 40 nm "Barts" GPUs for a CrossFire on-a-stick solution.

The two Barts chips will feature the BartsXT (Radeon HD 6870) configuration, with the card being designed to offer performance on par with HD 6870 CrossFire, with 3-GPU and 4-GPU CrossFireX support, and lower power draw than two single-GPU HD 6870 cards. The PCB design is the same as every dual-GPU AMD card ever made, there are two GPUs sitting on either sides of a PLX-made PCI-Express bridge chip, and each GPU system having its own VRM. There's 1 GB of GDDR5 memory over a 256-bit wide memory interface per GPU. Power is drawn from two 8-pin PCI-Express power connectors. The cooling solution is not pictured, but expect a multi-fan heatsink that spits hot air into the case.

Here is the complete socket AM3+ motherboard first-wave of ASUS, the M5A series, short and sweet. Based entirely on AMD 9-series chipset, including 9-series southbridge chips, the first-wave caters to gamer, performance, and enthusiast market segments, and only includes those chipset models that rely on discrete graphics (leaving out AMD 980G, 990GX). The lineup even includes models from ASUS' gamer/enthusiast-oriented Republic of Gamers (ROG) family, and The Ultimate Force (TUF) family.

The lineup starts with three models based on AMD 970 + SB950 chipset, which is a single discrete graphics card platform. The M5A97 is the entry-point, it bases itself entirely on what the chipset offers, plus two USB 3.0 ports. Moving up is M5A97 Pro, which has everything its little sibling has, plus a stronger 6+2 phase Digi+ VRM, and two eSATA ports. The M5A97 EVO, which was pictured a little while ago. This has everything the Pro variant has, plus two front-panel USB 3.0 ports, and FireWire.

Here is the first picture of the M5A99X EVO, an upcoming socket AM3+ motherboard by ASUS based on the AMD 990X + SB950 chipset designed AMD's FX-Series "Zambezi" 8-core, 6-core, and 4-core procesors. The AMD 990X is designed for discrete graphics with up to two graphics cards in CrossFireX. It is likely that the final iteration has NVIDIA SLI support out of the box. The AM3+ Black socket is powered by 8-phase Digi+ VRM, cooled by a large heatsink that sits next to the northbridge heatsink. ASUS came up with a new heatsink design theme. While the P8P67 series uses heatsinks with curvy/wavy fins, the M5A series uses sharp edges.

The AMD 990X northbridge gives out 16 PCI-Express 2.1 lanes split between two x16 slots. When both slots are populated, the graphics cards run on x8 bandwidth. The third black x16 slot is wired to the SB950 southbridge, and is likely x4. Other slots include two PCI-Express x1 and a PCI. Storage connectivity includes six SATA 6 Gb/s ports from the SB950 southbridge that support RAID 0, 1, 0+1, 5, 10 modes; a third-party controller drives two additional SATA 6 Gb/s internal ports. We don't know if there's another such controller handling eSATA.

AMD charted out the launch itinerary of its two upcoming client product lines, the A-Series "Llano" accelerated processing unit (APU), and the FX-Series "Zambezi" processor, in a presentation slide to its launch partners. The series of product launches starts at the upcoming Computex 2011 event, on June 1, where AMD will launch its new 9-series chipset. This could include two branches: first being the 2-chip chipset that drives Zambezi FX-series processors; and a second single-chip chipset for APUs. The action then shifts to E3 (Electronic Entertainment Expo) a week after Computex. On June 7, AMD will unveil the AM3+ platform, and motherboard vendors across the board are expected to show off their AM3+ motherboards

On 12th June AMD's Llano APU and Sabine platform will be launched for the Asian markets. Around the same time, at the AMD Fusion Developer Summit, AMD will interact with developers to develop software that's tailor made for the Fusion architecture (x86 with increased use of serial computational loads over GPGPU). June 14 2011 is the most important date. Called the AMD 2011 Client Launch Event, this event will be the launchpad for AMD's FX-series processors and A-Series APUs. Sabine platform will launched to the rest of the world's markets.