GELID Solutions showed off its newest Gamer series Black Edition CPU Cooler (doesn't carry a GX## model number). The cooler's design consists of a dark aluminum fin dual-tower design à la NH-D14, Corator DS, etc., and uses no less than seven heat pipes (3x 8 mm-thick and 4x 6 mm-thick) to transport heat from the base to the aluminum fin stacks. In the space between the two fin-stacks, a standard-size 120 mm (25 mm-thick) fan pulls air through the first stack, and pushes it through the second one. Pushing in fresh-air through the first stack is care of a slim 120 mm (15 mm-thick) fan. The cooler will be designed to be compatible with all modern CPU socket types, including LGA2011, LGA1155/LGA1156, LGA1366, AM3+/AM3/AM2+/AM2, and FM2/FM1.

Cooling specialist Alpenföhn presents their newest addition to the Matterhorn line of performance coolers. Dubbed the Matterhorn Pure, it focuses on delivering the best possible cooling at the best possible price. Even with its untreated surface, the Matterhorn Pure impresses with the same high quality which Alpenföhn is known for.

Weighing in at a solid 660 grams without a fan, the cooler manages to impress with plenty of heat dissipation area. But Alpenföhn has ensured, that the material used has been employed properly utilizing the same design as the Matterhorn cooler, but leaving out the Nickel plating to allow the cooler to be offered at the best price point possible. The Pure still offers six heatpipes which make direct contact with the heat spreader of the CPU and thus manages to impress with great performance as well.

First unveiled this January, Reeven's extreme-cooling pot (model: RECC-01) launched in various markets. In Japan, it is being marketed by Scythe. Measuring 70 x 70 x 160 mm (WxDxH), and weighing 900 g, the RECC-01 is a liquid nitrogen or dry-ice evaporator. Aluminum makes up most of its body, while nickel-plated copper makes up its base. Its base dissipation surface has 18 circular pits. An AEROFLEX polymer insulation sleeve is included. Also included are a retention module supporting Intel sockets LGA2011, LGA1155/LGA1156, LGA1366 and LGA775; and AMD sockets FM1/AM3+/AM3/AM2+/AM2; and a thermal probe port. It is priced at 19,980 JPY (US $242).

European cooling expert Phanteks expands its product portfolio with the PH-TC14CS C-Type CPU Cooler. The PH-TC14CS measures 160 x 151 x 140.5 mm ( with dual fans), it weighs 900 grams, has five nickel-plated 8mm copper heat-pipes, and supports the latest LGA 2011/ 1155/ 1156/ 1366/ 775 and AMD FM1/ AM3+/ AM3/ AM2/ 2+/ AM3 micro-processors. Featuring Phanteks patented Physical Antioxidant Thermal Shield ( P.A.T.S) and Cold Plasma Spraying Coating Technology (C.P.S.C), PH-TC14CS provides a perfect cooling solution for low profile setups. Enthusiasts with HTPC's or multimedia cases can achieve maximum cooling while maintaining quiet performance.

Japanese cooling expert Scythe announcing a new revision of the Top-Flow CPU cooler Grand Kama Cross. New Rev. B of the x-shaped cooler comes with reliable quality and performance for the same price as prior version. Main improvement is the compatibility to the new enthusiast socket LGA2011 from Intel. Furthermore Socket compatibility list includes latest Intel socket LGA1155, LGA1156, LGA775, LGA1366 as well as AMD socket 754, 939, 940, AM2, AM2+, AM3, AM3+ and FM1.

Well-proven Top-Flow design of grand Kama Cross Rev. B utilizes the created airflow to additionally cool surrounding components on the motherboard. Curved aluminum fin structure deflects the airflow, which has a positive influence on temperatures of Voltage regulator modules, chipset and RAM. Efficient airflow is achieved by the pre-assembled 140 mm axial fan. Scythe Slip Stream 140 PWM fan comes with PWN support and allows stepless fan speed adjustments from 500 to 1.300 RPM.

To finish off the week in style Thermalright announced the Silver Arrow SB-E, a new, high-end CPU cooler based on the Silver Arrow model introduced back in 2010.

The Silver Arrow SB-E features a dual tower/dual fan design and has eight (nickel-plated) 6 mm copper heatpipes (the old Arrow comes with four 8 mm pipes), a tweaked heatsink, two TY PWM fans - one 140 mm and one 150 mm (the SA packs two 140 mm spinners), and a mounting kit offering support for Intel LGA 2011 / 1366 / 1156 / 1155 / 775 and AMD AM2(+) / AM3(+) / FM1 processors.

The Silver Arrow SB-E also makes use of some more 'discrete' fan clips that won't interfere with taller memory modules. The cooler is expected to become available at the end of this month. No price tag was announced but we found it on pre-order at about $103 / 78 Euro.

Arctic showed of two nearly-identical CPU coolers, the Freezer i30 and Freezer A30. The two are identical till the point where the i30 is designed for Intel sockets only (LGA2011, LGA1155/1156), while the A30, for AMD sockets only (AM3+/AM3/AM2+/AM2). The two share a tower-type aluminum fin-stack heatsink design, capable of handling thermal loads of up to 320W.

The heatsink uses four 8 mm thick exposed-copper heat pipes that make direct contact with the CPU at the base, and pass through the heatsink, which is then ventilated by a 120 mm PWM-controlled fan with a fancy-looking frame. Rubber standoffs attach the fan to the heatsink dampening vibrations. The retention clips come attached to the heatsink out of the box. A 0.5g syringe of Arctic MX-4 compound is included, while the coolers' base don't come with the compound pre-applied.

The colored coolers from Zero Infinity are now available for pre-order at Caseking.de. The violet fan blades and accents define the look and feel of these new cooling units. The top model by the name "Free Flow+" impresses with three fans in combination with direct touch heatpipes and dual tower design, allowing it to cool even the hottest and fastest processors with ease.

Based in Hong Kong, the new brand aims to turn the heads of the enthusiast crowd. The name: Zero Infinity. "Zero" and "Infinity" present two opposite aspects for many mathematician, physicists and philosophers , while still distinctively connected to each other.

After extensive development work our newest product is on the market available. The Coollaboratory ALPHEOS Liquid Cooler offers by its perfectly co-ordinated aquifer system a brilliant cooling efficiency.

By the multiplicity of the superfine lamellas, which have a small distance too each other, results an extreme flow rate which dissolves the warm-restraining boundary layers. Thereupon the Coollaboratory ALPHEOS Liquid Cooler catapults itself into the best regions of all available water cooler at the market in the matter of cooling performance. It was provided on basis of computational fluid dynamics, therefore all death water zones were eliminated, which additionally affects the cooling performance positively.

Zalman took its first dip into water cooling after a while, with the CNPS20LQ, a self-contained (closed loop) CPU cooler. Designed and made originally by Asetek, a well-established brand name in OEM water cooling solutions, the CNPS20LQ uses a single-fan (dual-fan capable) radiator design. Its radiator measures 120 (W) x 158 (L) x 25 (H) mm. The radiator houses a small reservoir. The block houses a pump, which draws power from standard 4-pin CPU power header, and supports PWM control. The two are connected by flexible tubing. The block features a copper base with pre-applied thermal interface material. The CNPS20LQ supports all current socket types, including Intel LGA2011, LGA1155/1156, LGA1366, LGA775; AMD AM3+, FM1, and AM3/AM2+/AM2. It is priced at €69.90.

The high-end CPU-Cooler from the newcomer PHANTEKS is available immediately at Caseking.de. This cooler with the name "TC14PE" already managed to receive numerous awards for its excellent performance. PHANTEKS employs multiple features to achieve such extraordinary results: a patented surface at the nano-level, twin tower design and two high-performance 140 mm fans. For the perfect looks to go with the installed hardware, the cooler is available in blue, orange red or silver.

The young company PHANTEKS has invested more than two years into the development of the TC14PE CPU coolers, as their goal was not simply to produce a good CPU cooler, but to lead the performance charts. Instead of focusing on the best heat dissipation of an open test bench, PHANTEKS has made sure that the TC14PE performs best in its intended setting - a closed system.

With clever ideas and technical novelties, Enermax brings a breath of fresh air into the CPU cooler market - in the true sense of the word, because the innovative construction of the Enermax CPU coolers significantly enhances the air stream conduction and heat dissipation. The manufacturer integrated small spoilers, the so-called Vortex Generators, on the fins of the new ETD-T60 cooler to lead the air stream closely along the heat pipes and to avoid the development of hot spots in the back of the heat pipes (so-called Vortex Generator Flow/VGF).

By utilizing the difference in pressure between the warm air inside the heat sink and the colder air outside, Enermax further improved the air supply: The CPU cooler sides are not fully closed, so that additional fresh air can be sucked into the heat sink (so-called Vacuum Effect Flow/VEF). Both effects, VGF and VEF, have been proved successfully with the side-flow series ETS-T40.

Leading international mainboard and graphics card maker MSI released the mainboard BIOS with full AMD AM3+ 8-core CPU support for download today. Enthusiasts that own one of the listed mainboards1 can now download the update to support the latest AMD AM3+ 8-core CPUs (B2 Stepping). For those planning to purchase a new mainboard, if the box is labeled with "Supports AM3+ CPU with New BIOS," the mainboard will support the powerful AMD AM3+ 8-core CPUs out of the box. Enthusiasts that have purchased a mainboard that is on the list of compatible mainboards can update the BIOS themselves to support the latest AM3+ 8-core CPUs. Also, new in this BIOS update is official support for MSI's proprietary ClickBIOS II system optimization tool for all AMD 900 mainboards. The graphical UEFI BIOS provides mainboard-level support, and exporting OC Profiles to USB drives offers unparalleled convenience.

Motherboard giant, ASRock Inc. is proud to announce that their AMD Motherboard Series now can fully support the newly launched AM3+ Bulldozer processors. It's been an incredible year for multi-core processing and it's almost time for you to upgrade the essential CPU.

ASRock have prioritized AM3+ motherboard implementation and is the first to produce the most sophisticated AM3+ CPU-capable motherboards. The entire range of AM3+ mobo includes AMD's 9-Series, 8-Series, 7-Series and Nvidia's GeForce 7025 chipset series. Importantly, ASRock have a complete motherboard products line (from high-end, performance to budget-level) supporting AM3+ Bulldozer processors. Users are able to enjoy the exciting AM3+ performance with the latest BIOS update. ASRock is confident to say that they are the only motherboard maker that can offer so many AM3+ mobo choices based on difference chipsets. And this is what other mobo makers cannot do.

Zalman announced its latest high-end CPU air cooler, the CNPS12X. This beast was first shown to public at this year's Computex trade-show, back in early June. Between then and now, the CNPS12X got some important retention module changes that make it fully compatible with the upcoming LGA2011 socket on which "Sandy Bridge-E" Core i7 processors are based, as well as AMD AM3+ and FM1. Measuring 151 x 132 x 154 mm (L x W x H), and weighing exactly 1 kg, the CNPS12X uses a design that's essentially identical to that of the NH-D14 from Noctua, that of two fin stacks. It's just that the stacks here are somewhat circular in shape, and that the CNPS12X uses three fans: an intake (before the first stack), a conveyer (between the two stacks), and an exhaust (after the second stack). All three fans are 120 mm in size, and are illuminated by blue LEDs.

The fans seem to be using 3-pin (voltage) method of speed control. Supplied with the cooler are three RC5 intermediate resistors, which make the fans spin at speeds between 850 and 1100 RPM with as low as 22 dBA noise output. Without the RC5, the fans spin between 950 and 1200 RPM, with at least 24 dBA noise output. The heatsink is made almost entirely of dark nickel-plated copper, with certain aluminum parts. Heat is conveyed to the two copper fin stacks by six nickel-plated copper heat pipes, that make direct contact with the CPU at base. Zalman did not give out pricing and availability information.

Japanese cooling expert Scythe announces the successor of Big Shuriken CPU Cooler. Big Shuriken 2 had to undergo further development on the heatsink and axial-fan side to provide better even performance and compatibility.

Applied improvements of heatsink are not obvious at first sight because main heatsink structure was inherited from Big Shuriken (1) CPU Cooler. Total amount of copper-heatpipes was increases from four to five pieces. Curved heatpipes are connecting the nickel-plated copper-base with the two upper layers of aluminum fins. Big Shuriken (1) was equipped with a solid heatsink on top of the copper-base which has been removed in the new version.

The Spire all new Kepler universal micro-processor cooler series are direct contact heat-pipe solutions for Core i3/i5 and i7 from Intel and the AMD AM2/3/FM1 micro-processors. There are three (3) different models ranging from two up to four 6mm sinter powder heat-pipes which are in direct contact with the cpu heat-source, dissipating heat effectively and fast.

The high density fins are crowned with a powerful fan for high airflow and great cooling performance. The 92mm dc fan provides ample airflow and silent cooling at 19.0dBA. Compatibility is ensured with the multi-platform mounting clip for Intel 775/1155/1156 sockets and AM2/AM3/FM1 micro-processors. The Kepler series from Spire are build to deliver great cooling for maximum system performance.

GlacialTech Inc., a diverse provider of cooling, power supply and PC enclosure solutions for consumer and industrial applications and a world-class provider of cost effective cooling components and chassis launches the latest Igloo H46 & H58 Series CPU coolers with Intel LGA1155/1156 and AMD FM1 / AM2 / AM2+ / AM3 sockets. The unique design provides good cooling effect to the components around the CPU.

As is usual, GlacialTech comes out with a product that provides highest quality materials and workmanship. The design is clear and functional. The manufacturer decided to waive all creative elements that may have negative influence on the cooling performance. Users can choose out of two different models. The attached PWM fan is certainly equipped with the durable and silent bearing. Price performance, noise performance and weight performance are GlacialTech's three principle design philosophies.

Alpenföhn is aiming at the performance crown under the CPU coolers with the K2. For this, Alpenföhn is employing two cooling towers and ships the unit with two, potent Wing Boost fans. The middle fan with 140 mm is intended to keep the air flow at a maximum, while the smaller 120 mm unit in front is meant to offer maximal compatibility to modern mainboards, while still providing impressive air flow. Those wanting to go even further may install a third fan in the rear of the cooler. The Alpenföhn K2 CPU cooler is available immediately at Caseking.

The cooler utilizes an incredible amount of materials with a massive weight of 1050 grams. Using more mass does not simply equate to greater performance, as only an intelligent use of such will make for a great cooler and this is something the Alpenföhn engineers are certainly experts in. Eight heatpipes are embedded in a Copper, with both aspects featuring a high-quality Nickel plating. On top of that, all contact points between cooling fins, heatpipes and ground plate feature high-quality solder points to maximize the potential of the K2.

Thermal Solutions specialist GELID Solutions reveals the GX-7 CPU cooler of its GAMER product line. Engineers at GELID Solutions have created an outstanding new CPU cooler with 7 power heat pipes. Contrary to traditional heat pipe arrangement for this GAMER CPU cooler "GX-7", a special array of heat pipes was used to take full advantage of all 7 heat pipes heat transfer capacity. Further V-shaped aluminum fins were used in the center of the heat sink to allow airflow to reach the heat sink more evenly. Openings inside of the heat sink and near the heat pipes let fresh-air flows in from the top and the bottom to zones normally poorly ventilated, and eliminate the creation of hotspots. The unique heat sink shape supports dual fans.

Included in the GX-7 is the multi-award winning Wing 12 PL fan, allowing the cooler to reach remarkable temperature. The Wing 12 PL Blue features blue LEDs and unique Nanoflux bearing which ensures a friction-free and silent operation. Thanks to the clever design and magnetic bearing, the impeller can be detached for easy cleaning. Additionally, fan blade winglets were designed to achieve larger airflow and greater static pressure. The fan also includes a premium PWM control, so the temperature can be controlled precisely by the BIOS.

ASRock unveiled the first Fatal1ty-branded AMD platform product, a premium motherboard based on the AMD 990FX chipset, ready for AMD FX series processors in the AM3+ package. The board sports the signature Fatal1ty color scheme of black and red, and is geared for high-end gaming PCs. The AM3+ socket is powered by a 14-phase digital PWM power design, which is ready for even 140W chips. It is wired to four DDR3 DIMM slots supporting dual-channel DDR3 with speeds of over 2000 MHz by overclocking.

Two of the unique selling points here is ASRock Fatal1ty XFast USB, a pair of low-latency and high-polling USB ports to plug in your gaming mouse and keyboard; and XFast LAN, which is a software layer that works to lower latency and prioritize internet bandwidth to applications. To top it off, there's a Fatal1ty-themed UEFI setup program that features some extra advanced settings.

GELID today announced a revision of its Tranquillo CPU cooler. Revision 2 of this aluminum fin tower-type cooler comes with three major changes, an updated heat pipe profile; a new AMD socket clip that allows 4x 90° installation; and an improved heatsink shape. To begin with, the four exposed-copper heat pipes project out of the fanned out better, with the heat pipes almost reaching the periphery of each of the fins. Next, a new AMD socket clip allows you to orient the heatsink in the same way you can with the square bolt layout of Intel sockets (90° in any direction). Lastly, in the space between the CPU base and the bottom of the aluminum fin stack, GELID put a larger heatsink than the one found on the original Tranquillo. The Tranquillo Rev. 2 is certified to work on Intel sockets LGA1366, LGA1156, LGA1155, and LGA775; AMD sockets AM3, AM2+, and AM2. The company did not give out pricing information, but usually revised SKUs carry the same market prices as the originals they're revisions of.

Prolimatech released a new variant of its iconic Megahalems CPU heatsink, called the Black Series Megahalems. With the same exact dimensions as the original at 130 x 158.7 x 74 mm (LxWxH), the new variant uses black colored aluminum fins. The coating doesn't make for a polished, glossy surface, but a grainy one, which increases surface area. The design remains the same: six nickel-plated copper heat pipes pass through a base, conveying heat to two aluminum fin stacks that are arranged along each arm of the U-shape the heat pipes make. The Black Series Megahalems is compatible with all the current CPU socket types, including AMD AM3+, AM3, AM2+, AM2; Intel LGA1155, LGA1156, LGA1366, and LGA775. The Prolimatech Megahalems Black Series is listed on Caseking.de for €54.90.

Japanese cooling expert Scythe is announcing today the successor of popular Mugen 2 CPU Cooler. Mugen 2 CPU Cooler was awarded many times and is well known world-wide to mainstream users, Overclocker and Enthusiasts. During the development process main focus was set on improvement of performance and mounting mechanism as well as shrinking the heatsink dimensions. New Mugen 3 CPU Cooler is ready to take on the legacy.

While optimizing the performance the whole heatsink design of Mugen 3 CPU Cooler was re-worked which resulted in creation the improved fin-structure M.A.P.S. (Multiple Airflow Pass-Through Structure). Enhancements were achieved by reducing the aerodynamic resistance as well as improving of the overall heatsink stability. Furthermore Mugen 3 is equipped with total of six high-quality copper-heatpipes where the predecessor had only five. Typical for Scythe is the excellently processed and flat surface of the copper base which was refined by a thin nickel layer to prevent corrosion.

iChill CPU Coolers are the ultimate thermal solution for the heat, especially in summer, that can damage your PC's CPU (main brain). A CPU that constantly runs too hot will have a shorter life than one that runs cooler, and could also cause problems like random shutdowns and the loss of important data. iChill brings you the X5, XXX and Storm CPU thermal solution!

When looking for ways to cool a PC's CPU, the first thing to do is reduce the overall temperature inside the PC's case, because that's where the CPU "lives." The best way to do that is to create an airflow that brings in cool air from the lower front of the case and exhausts hot air out the back of the case. After all, the fan that cools your PC's CPU can't work very well if it's blowing hot air onto your CPU. Don't make the mistake of thinking that your power supply's fan will cool your entire PC, like it did in older PCs.