EK, the premium liquid cooling solutions manufacturer, is launching its most advanced fan series to date - the EK-Loop FPT 120 and 140. These high-static pressure radiator cooling fans are designed to completely replace the existing Vardar series across the entire product line. The EK-Loop FPT fans improve upon many aspects while focusing on excellent radiator performance. These fans feature an optimized and balanced performance-to-noise ratio on the wide fan operational range.

New FPT fans feature a full-frame design that doesn't allow air to escape outside the frame, thus achieving better static pressure overall. The latest fan also allows daisy-chaining, ultimately reducing cable clutter and easing cable routing through the EK-OmniLink - an 8-pin Micro-Fit connector ecosystem. All the signal and power wiring for the PWM and D-RGB runs on a single cable and connector, which then utilizes a single cable to connect to the source. Most importantly, the EK-OmniLink ecosystem doesn't require any special controllers since the connection ends in the standard motherboard connectors - a 4-pin PWM for the fan power and a 3-pin 5 V D-RGB for the connectors.

MONTECH, an innovative PC components and peripherals brand, announces the Metal DT24 BASE and DT24 PREMIUM, dual tower CPU coolers equipped with 2x METAL 120 PWM fans. Featuring a 104-fin stack paired with 6 heat pipes of 6 mm diameter each, the METAL DT24 is compatible with the newest INTEL LGA 1700 and AMD AM5 socket with a rated TDP of 270 W. The DT24 PREMIUM includes an additional aluminium ARGB top cover. The included METAL 120PWM fans offer speeds of up to 1950 RPM and deliver up to 69CFM of airflow and 2.82 mm H2O of static pressure at a 26 dBA noise level. The METAL DT24 BASE is available at MSRP US$57.00, the METAL DT24 PREMIUM is available at MSRP USD $69, and the METAL 120 PWM is available at MSRP $9.90.

The dual-tower, dual-fan METAL DT24 CPU coolers are built from the ground up for high-performance cooling. The heatsink includes a total of 6x 6 mm thick heat pipes for quick and efficient heat transfer from the CPU. The dual-tower cooler has a massive 104-fin stack, which gives the METAL DT24 a surface area of 8553.23 cm² allowing the cooler to handle up to 270 W TDP. The METAL DT24 supports the latest Intel LGA1700 and AMD AM5 processors.

Thermaltake, the leading PC DIY premium brand for Case, Power, Cooling, Gaming peripherals, and enthusiast Memory solutions, announces their high-end high static pressure radiator fan, the TOUGHFAN 12/ 14 RGB. Thermaltake's TOUGHFAN lineup has long been exceptional in terms of cooling capability, and their newest TOUGHFAN 12/ 14 RGB takes things even further with its unique design, and RGB lighting effects.

Built upon the fundamentals of an already high-performing TOUGHFAN 12/ 14 high static pressure fan, now we've introduced magnificent RGB lighting into the series to make the TOUGHFAN 12/14 RGB pop. Let's start from its look, boasting its luminous fan frame design with 24 addressable 16.8 million color LEDs, TOUGHFAN 12/ 14 RGB empowers users to explore the possibilities of ultimate personalization from the ground up. The design encourages users to get creative with their builds and colors in a variety of ways, which is exhilarating. Besides, it is worth mentioning that TOUGHFAN 12/ 14 RGB natively works withthe all-new 4th generation software controller, so that you will experience a more stable connection across TT RGB PLUS products and perky RGB lighting effects.

GAMDIAS, the global manufacturer of high-quality gaming peripherals and technologies, unveils the third generation AEOLUS fans M-series to bring innovative quality and performance to the table. The stealth black fan features its optimized fan blades for the highest performance, modified hydraulic bearing with smart PWM function for exceptional acoustics, and low-profile ARGB lighting to create perfect aesthetics. The AEOLUS M3 fans are now available in AEOLUS M3-1201, a single fan pack, and AEOLUS M3-1204R, a 4-pack combo with an additional PWM AEOLUS box and controller, to satisfy the needs of various PC builds.

Built with an emphasis on performance, the AEOLUS M3 fans can range from 800-2000RPM for extremely high air pressure. Referring to optimized design and premium hydraulic bearing with PWM function, the fan reaches airflow capabilities up to 67.5 CFM for maximum cooling with quiet operations. The fan frame features a chambered design for a more robust air intake, while the altered fan blade design allows maximum airflow performance, better acoustics, and a minimalist style.

Thermaltake, is delighted to announce the first-ever swappable fan blade design here at Thermaltake, SWAFAN 12/14 RGB Radiator Fan is available for purchase now. One of the most prominent highlights of SWAFANs is that it has two types of fan blades that are swappable, not only enabling users to orient the airflow direction depending on however they like it but, meanwhile, providing glorious full RGB lighting of the fan. From tech lovers, pc builders, pc enthusiasts to modders, we can all appreciate how functionally capable this design is and take full advantage of its convenience.

[Editor's note: Our in-depth review of the Thermaltake SWAFAN 12 RGB is now live]

Gelid Solutions is excited to introduce the "The Ultimate Mining Fan" GALE and GALE EXTREME, designed to maximize cooling capabilities by combining modern technologies with exceptional hardware, the gale series looks to out compete all of its competitors. Both high performing fans contain a double ball bearing system along with an optimized impeller to improve reliability and airflow. Also, a pre-installed Fan Grill is added to avoid damaging the fan blades. Its impressive specifications are worthy for any miners that value efficiency to give it a try.

GALE: Comes with a max air flow of 110 (CFM) for cooling, fan max current 0.55 (A) with a fan connector of 4-pin PWM, max noise level 45 (dBA) also with a power draw of max. 7 (W), static pressure of 12 (mmH2O) and a Fan Speed of 500 - 3500 (RPM). GALE EXTREME: Comes with a max air flow of 195 (CFM) for maximum cooling, fan max current 2.8 (A) with a fan connector of 4 Pin PWM, max noise level 60 (dBA) also with a power draw of max. 33.6 (W), static pressure of 24 (mm H₂O) and a Fan Speed of 500 - 6000 (RPM).

Antec Inc., a leading provider of high-performance computer components and accessories for the gaming, PC upgrade and Do-It-Yourself market, presents a new highly efficient case fan called Storm. The case features a spiral structure for better airflow, fluid dynamic bearings for smooth and quiet operation and a PWM daisy chain option to add more cooling when needed. Storm is now commercially available from 14,80€ (suggested retail price including VAT).

The PWM fan measures 120 mm x 120 mm x 25 mm and operates at a speed of 600 - 2000 RPM. Fluid Dynamic Bearings ensure a low fan noise and an incredible cooling performance, all at a long lifespan of 80.000 hours. Storm delivers a maximum airflow of 66,56 CFM and reaches a maximum air pressure of 2,7 mm H₂O.

Antec Inc., a leading provider of high-performance computer components and accessories for the gaming, PC upgrade and Do-It-Yourself market, presents a new highly efficient case fan called Storm. The case features a spiral structure for better airflow, fluid dynamic bearings for smooth and quiet operation and a PWM daisy chain option to add more cooling when needed.

Storm is now commercially available on Amazon US. The PWM fan measures 120 mm x 120 mm x 25 mm and operates at a speed of 600 - 2000 RPM. Fluid Dynamic Bearings ensure a low fan noise and an incredible cooling performance, all at a long lifespan of 80.000 hours. Storm delivers a maximum airflow of 66,56 CFM and reaches a maximum air pressure of 2,7 mm H₂O.

SilentiumPC, the European manufacturer of CPU coolers, power supplies and PC cases, announces the availability of the Fluctus 120 PWM and the Fluctus 120 PWM ARGB fans in a 3-pack bundle. The new bundles are perfect for users looking to upgrade their PC case fans and can also greatly boost the performance of AIO liquid cooling solutions, while at the same time significantly reducing noise levels. The three-pack also allows users to save money, rather than having to buy individual fans at a higher cost.

Each of the SilentiumPC Fluctus 120 PWM and Fluctus 120 PWM ARGB fans is equipped with a unique 9-bladed rotor with serrated leading edges. They provide the high static pressure necessary for creating good airflow through the dense radiators of all-in-one liquid coolers. Users benefit from a reduction of temperatures from 1 to 3°C compared to other fans commonly paired with AIO liquid coolers. Noise levels are also significantly reduced thanks to the excellent acoustic performance of the Fluctus series of fans. A wide range of speed regulation - from 300 (±100) to 1800 (±10%) RPM - makes the Fluctus 120 PWM suitable for use both on bigger (360 mm) and smaller (240 mm, 120 mm) radiators, which usually require higher fan speeds.

Today ARCTIC, a leading manufacturer of low-noise PC coolers and components, introduces a new 140 mm case fan, the P14 Slim PWM PST. Small form factor enthusiasts will appreciate the slender frame of ARCTIC's latest case fan: with a mounting height of only 16 mm, the P14 Slim PWM PST takes up much less space than a standard case fan. This makes it an ideal choice for HTPC cases, SFF and mini PCs.

The P14 Slim PWM PST employs ARCTIC's signature PWM sharing technology (PST), allowing up to three additional fans to be connected in series. Fan speed can be controlled via PWM, and with a range of 150 to 1800 RPM, the P14 Slim PWM PST guarantees high cooling performance while keeping noise levels at a minimum.

Due to high customer demand, Alphacool is expanding its Special White Edition and now also offers the Rise Aurora fans in white. The fans perfectly match the white NexXxos radiators and the connectors of the Eizapfen White Edition in terms of color. The digital aRGBs create a unique illumination to complete the visual appearance.

Alphacool's Rise Aurora doesn't just score points for its design, though. Like the model in black, the fan is offered in 120 mm or 140 mm. Due to the high airflow (120 mm 154.1 m³/h | 140 mm 154.1 m³/h) paired with a high static pressure (120 mm 3.17 mm/H₂O | 140 mm 2.20 mm/H₂O), the fan is perfect for mounting on radiators of a water cooling system or for ventilating a case.

HYTE, the new PC components, peripherals, and lifestyle brand of iBUYPOWER, a leading manufacturer of high-performance custom gaming PCs, today announces the HYTE eclipse HG10 along with the HYTE flow FA12 fans and PCIE40 PCIe 4.0 Riser Cable. "We are excited to announce the addition of three new products to our offerings. This is just the start, much more to come and we hope everyone supporting us can continue to enjoy this journey with us.", said Rob Teller, Lead Roadmap Architect of HYTE.

The HYTE eclipse HG10 has made its first appearance at this year's CES 2022 where it caught a lot of attention thanks to its unique appearance and features. On the outside the sleek, matte lunar grey finish looks very appealing while the premium vegan leather lining the plush foam headband assures that the eclipse HG10 is comfortable even during extended hours of gameplay. In order to achieve the competition-grade level, the eclipse HG10 wireless gaming headset is equipped with high-capacity, lithium-ion battery, delivering a market-leading 30-hour battery life. Once a low battery level is reached, users can simply connect the included USB Type-A to USB Type-C charging cable and continue using the eclipse HG10 without interruption.

Akasa, has recently released a set of case fans in the Alucia line of products, adding to the Alucia H4. The Alucia SC series come in 120 mm (SC12) and 140 mm (SC14) sizes, which makes these fans great for cases of all shapes and sizes. Perfect for a stealthy PC build with no lighting effects, the fans are jampacked with features; no PC can be complete without Akasa's high performance Alucia SC fans!

The most important factor of a case fan is arguably the airflow - a high level of which can circulate air more efficiently around the PC case. Alucia does not back down, with the powerful, optimized fan blade design producing 56.3 CFM (SC12) and 84.3 CFM (SC14) of airflow; this shows the amazing aerodynamic efficiency possible from these fans.

ID-COOLING today announced IS-47S 47 mm height low profile CPU air cooler. At a total height including the fan of 47 mm, this cooler would be a good choice for your A4 cases. Designed with an overall dimension of 100x93x47mm, it has no conflict of the RAM or PCI-E slots. The heatsink is solid built with a pure copper base and 4 heatpipes and massive aluminium fins. The heatsink itself is measured at 35 mm height. Adding a powerful 12 mm PWM fan, this cooler is capable of handling processors with a maximum TDP of 95 W. In terms of mounting kit, two separate backplates are provided in the box for Intel and AMD respectively. The sockets list includes Intel LGA1700/1200/1151/1150/1155/1156 and AMD AM4.

The bundled thermal grease is named FROST X25, which has a thermal conductivity of 10.5 W/m-K.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the SilentStorm 120 PWM and the SilentStorm 140 PWM, Sharkoon is now launching two fans which each have PWM control. Available as 120-milimeter and 140-milimeter RGB LED fans, and at a maximum speed of 1,400 revolutions per minute, they should always achieve the best possible cooling for the PC case thanks to control from the mainboard. Both models also have nine addressable LEDs and replaceable vibration dampers in two different colors.

Thanks to PWM control, the speed of the SilentStorm PWM fans is controlled exactly as required by the mainboard, up to a maximum speed of 1,400 revolutions per minute. The SilentStorm 140 PWM thus generates an airflow volume of up to 121.9 cubic meters per hour, while the SilentStorm 120 PWM has an airflow volume of up to 93.6 cubic meters per hour.

SilverStone today introduced the Shark Force 160 ARGB case fan. As its name suggests, this is a 160 mm diameter fan, but it also offers a maximum air-flow of 160 CFM. The fan is designed such that the impeller's diameter is 160 mm, but the frame itself can be mounted in 140 mm vents, provided there's enough clearance around them for a larger frame than what 140 mm fans typically come with.

The Shark Force 160 ARGB features a fluid-dynamic bearing, and turns at speeds of up to 1,600 RPM, pushing up to 160 CFM of airflow, at up to 2.21 mm H₂O static-pressure, and up to 38.1 dBA noise output. It takes in a 4-pin PWM connector for its main function, and 3-pin ARGB for its lighting, which consists of ARGB LEDs studded in the hub. The fan measures 160 mm x 160 mm x 25 mm, weighing 220 g. The company didn't reveal pricing.

Phanteks announced the launch of the new Eclipse P600s and Evolv X Matte White Edition along with the Gen4 PCI-e Riser Cables. Its stunning all-new matte white look makes the Evolv X and Eclipse P600s a perfect combination for color-themed builds while maintaining a wide range of flexibility and premium materials.

Evolv X & Eclipse P600S Matte White Edition
The Evolv X and Eclipse P600s are mid-tower cases that offer dual system capabilities, massive storage, and extensive water-cooling support. The Evolv X features a 3 mm aluminium exterior with hinged clear tempered glass, improved airflow, smart spacing, and additional mesh elements. The P600s, a hybrid forged between silent and high-performance chassis. Designed with an effective soundproofing panel and Phanteks' new high-airflow fabric, the Eclipse P600s offers the full potential of two opposites, minimum noise, and maximum airflow. Whether it's a high-end water-cooling build, professional data storage system, or even a dual-system PC, both cases can accommodate your desired configuration thanks to the effective interior design that utilizes the space efficiently.

ARCTIC, one of the leading manufacturers of low-noise PC coolers and components, expands the RGB fan portfolio with 140 mm variants of the P-series with PWM PST. The P14 PWM PST A-RGB 0dB and P14 PWM PST RGB 0dB are available starting now as single fans as well as in a three-fan bundle. The PWM fan control enables dynamic speed adjustment. At low load, the case fans automatically switch to silent passive mode.

With 12 RGB-LEDs and the ARCTIC P14 fans, the case will glow in the color of your choice; in the A-RGB version, there are virtually no limits to the lighting effects. The P14 PWM PST A-RGB and RGB fans have tested compatibility with the (A-)RGB standards of leading motherboard manufacturers and are therefore interoperable with their connectors and software. This makes installation and configuration especially easy. The P14 PWM PST RGB 0 dB is available in the Value Pack with the software-controlled ARCTIC lighting controller, which allows freely configurable LED modes in addition to numerous presets.

Phanteks debuts a host of new products for the upcoming year at CES 2022 - The brand new Evolv Shift XT Mini-ITX Chassis and Revolt SFX Power Supplies, Matte White Editions for the Evolv X & Eclipse P600S Chassis, white SK PWM D-RGB Fans, white AMP Power Supply and a complete range of Gen4 PCIe Riser Cables and Gen4 Vertical GPU Bracket.

Brand new and unique Evolv Shift XT Mini-ITX Chassis and super compact Revolt SFX Power Supplies
Evolv Shift XT - Compact, Powerful, Futureproof
The Evolv Shift XT brings a unique small form factor that can extend in size to tailor to your cooling performance needs. The Evolv Shift XT has no compromise on performance with support for powerful hardware, whether in Compact, Aircooled, or Liquid Cooled Mode.

EK, is happy to announce that all stand-alone pumps, pump-reservoir combo units, and distribution plates now come with the newest and latest genuine Xylem D5 and DDC pumps. The transition started months ago, but now, all of the EK stock has been fully converted to products using these new pumps. The D5 variants have been upgraded from G2 to G3, which signifies their generation, and the DDC pumps now come in 4.2 variants upgraded from the 3.2 version. All EK products that are now using the latest version of a D5 or DDC pump did not undergo any price changes as a result of these upgrades.

The G3 motor is a successor to the world-renowned Xylem D5 PWM pump. It features an improved PWM control driver. The cables come all black now for a reduction in visible cable clutter. To top it off, the connector is now changed to a SATA power plug, which is much easier for users to connect but also has a smaller footprint, and further reduces the need for MOLEX 4-pin cables on your modular power supply. All this leads to a cleaner build with fewer and less visible cables.

be quiet!, the German manufacturer for premium PC components, launches its new Light Wings series: be quiet!'s first fans with ARGB illumination. Besides its characteristic lighting properties, development focused on performance, low-noise operation as well as the manufacturer's typical high-quality standards. Light Wings fans are equipped with a PWM connector and have one LED ring at the fan's inlet and another narrow LED ring at the outlet. They are available in 120 mm and 140 mm sizes.

Light Wing's light rings are equipped with up to 20 individually addressable LEDs with a diffuser to spread the light in both directions. This results in a remarkably uniform illumination and impressive lighting effects. Light Wing triple packs additionally contain an ARGB hub to enable the synchronization of up to six ARGB components in total. The fans can also be connected to motherboards with 5 V ARGB-headers and controlled by motherboard software. Light Wings fans allow daisy-chaining of its signal cables for a cleaner case interior.

CORSAIR, a world leader in enthusiast components for gamers, creators, and PC builders, today announced new, highly customizable additions to its ELITE line of all-in-one CPU coolers: iCUE ELITE LCD Display Liquid CPU Coolers. With a vivid 2.1" LCD screen on the pump head to display anything from system vitals to animated GIFs, ELITE LCD coolers offer a unique window into both your PC's performance and your own style and personality. The ultra-bright LCD screen is also available as an upgrade kit for CORSAIR iCUE ELITE CAPELLIX coolers, letting you add a digital dashboard to your existing cooler.

The new H100i ELITE LCD, H150i ELITE LCD, and H170i ELITE LCD are also equipped with new ML RGB ELITE Series fans, delivering powerful concentrated airflow with the performance of magnetic levitation bearings and AirGuide technology, illuminated by eight individually addressable RGB LEDs per fan. ML RGB ELITE fans are also available separately in both 120 mm and 140 mm sizes and either black or white frames, so you can take advantage of their high performance to cool your entire system as well.

ARCTIC, one of the leading manufacturers of low-noise PC coolers and components, has added the powerful Liquid Freezer II 280 and Liquid Freezer 420 RGB and A-RGB models to its award-winning AIO range. The multi-compatible water coolers are also equipped for Intel's new Alder Lake CPUs with LGA1700 sockets. With the efficient PWM-controlled pump, featuring a VRM fan for additional cooling in the socket area, as well as the proven 140 mm P-fans, achieving high static pressure with very low noise, the ARCTIC Liquid Freezer II series clearly sets itself apart from other AIOs and offers plenty of overclocking flexibility.

A maintenance-free water circuit and the integrated cable management, which hides the PWM and RGB cables in the hose sleeves, plus a six-year manufacturer's warranty underline the high quality and complete the attractive price-performance ratio of the Liquid Freezer II range. The color-capable, effective LED lighting of the fans makes these high-performance coolers the ideal choice for gaming PCs. Optionally, the Liquid Freezer II 280 RGB and Liquid Freezer 420 RGB are also available in a bundle with Arctic's software-controlled RGB controller.

Akasa, a leading provider of active cooling and lighting solutions, has announced the three new fan bundles available for purchase. These fan packs are perfect for all applications, from high performance, low noise PC builds (Viper), a premium aesthetic with bright and vivid aRGB lighting (SOHO), or home theatre PC or compact, small form factor builds (Slim Fan). The Viper Fan also comes in a white colourway, which pairs seamlessly with all-white and pastel builds.

The SOHO AR has dazzling and exciting aRGB lights, which surround the rim of the fan. The stylish RGB boasts over 16 million lighting combinations, and contrasts with the sleek fan blades and premium Akasa logo to create a classy, yet bold look to the fan. The sleek fan blade's unique shape and design provides a vastly improved aerodynamic efficiency and optimises the airflow (52.91 CFM) and air pressure (1.75 mm H²O) for the fan.

Raijintek today introduced the RJK 5V DRGB-PWM Hub, a device that lets you control both the lighting and ventilation of your PC. You get an impressive eight 4-pin PWM fan headers, and eight 3-pin addressable-RGB (5 V) headers downstream. On the upstream, it takes in a PWM signal for the fans, and a single 3-pin ARGB input from your motherboard. Powering it, along with all the fans and lighting attached to it; is a single SATA power connector. The hub has two buttons, one that syncs the lighting to the upstream source; and the other that lets you cycle between a few in-built lighting presets. The base of the hub is magnetic, letting you attach it to the sheet-metal of your case. The hub measures 133.5 mm x 57.5 mm x 13.5 mm (WxDxH). The company didn't mention pricing.