Elitegroup Computer Systems (ECS), the world's leading motherboard, graphics card, barebone system, notebook and mobile device manufacturer presents two king-level motherboards to join ECS Black Series as the best gaming station of next generation based on Intel X79 chipset supporting LGA2011 Sandy Bridge-E processors-X79R-AX Black Extreme and X79R-AX Black Deluxe.

ECS Black X79 Series unleashes the extreme power of Intel Sandy Bridge-E processors and breaks the limitation of your desktop computer to a height you could never dream of. ECS Black X79 Series is equipped with four PCIe Gen 3 x16 slots for 4-way GPUs supporting NVIDIA SLI and AMD CrossFireX graphics cards to construct an invincible gaming station. Also, ECS Black X79 Series supports quad-channel memory up to 64GB providing off-the-chart task processing speeds; the memory frequency support could also overclock to 2500MHz which is over 87% more than the traditional 1333MHz memory frequency.

A certain British retailer listed the two hexa-core Sandy Bridge-E chips, Core i7-3930K and Core i7-3960X Extreme Edition. The top-end i7-3960X is priced at £850.79 (including taxes), that converts to around US $1,361. The unlocked Core i7-3930K, on the other hand, is priced at £477.59 (including taxes), that's around US $764. Earlier this month, news surfaced of a Chinese retailer listing these chips. The Chinese put the Core i7-3960X Extreme Edition at the equivalent of US $1,227, and Core i7-3930K at the equivalent of US $912.

While the British store is making the Core i7-3930K at least $150 cheaper, it's still a long shot from the $583 price point that the chip is expected to occupy. On the other hand, the British store is quoting a price that's about $130 higher for the Core i7-3960X. It looks like Core i7-3960X Extreme Edition is increasingly unlikely to come with a three figure price.

Last week we got a glimpse of Gigabyte's new 3D BIOS technology, a UEFI setup program with an innovative and functional user interface built into Gigabyte's upcoming X79 motherboards. Today Gigabyte released a new video detailing another such innovation, called 3D Power. This program gives you total and unrestricted control over the three main dimensions of your motherboard's power delivery: voltages, PWM frequency, and phase control. Gigabyte announced that all its upcoming X79 motherboards will feature PWM (pulse width modulation) CPU power design, backed by highly capable PWM controllers that give you a plethora of things you can tweak.

To begin with, the 3D Power application starts up with a cube that has the icons of the three main elements. Clicking on "voltage" gives you control over voltage-related settings in three main pages, turbo voltage response, load line calibration (active V-droop control), and active over-voltage protection. Load line calibration allows you to fine-tune the extant of V-droop correction over a variety of power domains, such as CPU, VTT, IMC, and DRAM.

Here are the first pictures of MSI's socket LGA2011 motherboard in the micro-ATX form-factor. Earlier this week, we got to see through ASRock's X79 Extreme4-M that LGA2011 micro-ATX boards were indeed possible. Called the MSI X79MA-GD45 (MS-7738 V1.1), this board offers all the connectivity possible on a board with such a tight footprint. The LGA2011 socket is powered by a 9-phase VRM. It is wired to four DDR3 DIMM slots, two on either sides of the socket, powered by 2-phase VRM. Expansion slots include two each of PCI-Express 3.0 x16 and PCI-Express 2.0 x1. 2-way SLI and CrossFire are supported.

SATA connectivity includes two SATA 6 Gb/s (white), four SATA 3 Gb/s (black). There are no eSATA ports, but four USB 3.0, two on the rear panel, two by internal header, driven by Renesas-made controllers. The rest of the connectivity is fairly standard: 8+2 channel HD audio driven by Realtek ALC892 CODEC with optical and coaxial SPDIF outputs, single gigabit Ethernet driven by Realtek 8111E, and a number of USB 2.0 ports. One of the front-panel USB 2.0 headers is designed for charging portable devices even with the system shut down (yet plugged in). The board will be driven by UEFI firmware, we're getting to see some nifty features for overclockers such as voltage measurement points across a wide range of voltage domains.

There sure is going to be fierce competition between motherboard vendors once "Sandy Bridge-E" Core i7 processors come out, a little later this month. Even the tiniest edge over competitors in terms of features can go a long way with market success. Gigabyte is ready with one such feature of its own: the Bluetooth 4.0 + WiFi b/g/n card, which it will bundle with the GA-X79-UD5, GA-X79-UD7(OC), and G1.Assassin 2. Simply put, this is a special addon card that will provide a Wireless b/g/n (wireless n at 150 Mbps), and Bluetooth 4.0 (24 Mbps) connectivity.

Here's how it works: the card sits on one of the board's PCI-Express x1 slots (or any PCIe slot for that matter), the PCIe connection is wired to the wireless network controller on the mini-PCIe card. We expect this to be a common Atheros AR9285-based card. The main card also has a Bluetooth 4.0 controller, which connects to the system using USB 2.0. A cable runs from the card to any of the board's USB 2.0 front-panel headers. The Bluetooth controller only uses one port, so the other is wired out as an internal USB 2.0 port (good for any DRM dongles you may have). The card is then wired to two antennas (included), one for the wireless network controller, the other for the Bluetooth, both have activity LEDs. It's not known if Gigabyte will sell this card separately, so just about anyone can use it.

Noctua today presented a new special edition of its award-winning NH-D14 cooler for the upcoming Intel LGA2011 X79 platform. Having received more than 250 awards and recommendations from the international press, Noctua's NH-D14 has become a benchmark in premium quality quiet cooling. The new SE2011 version is a special edition for Intel's soon to be released Core i7-3000 (Sandy Bridge-E) CPUs and comes equipped with Noctua's SecuFirm2 mounting system for LGA2011 as well as an exquisite NF-P12/NF-P14 dual PWM fan configuration.

"Hardware enthusiasts have every right to be excited about Intel's upcoming Sandy Bridge-E processors, but to get the most out of it, you'll definitely need a high quality cooling solution", says Mag. Roland Mossig, Noctua CEO. "Our flagship model NH-D14 has earned a reputation as one of the finest high-end quiet coolers on the market, so we thought that this should be a perfect match. The new special edition for LGA2011 will keep your Sandy Bridge-E CPU cool no matter what you throw at it, and it will do so at minimum noise levels, thus appealing to overclockers and quiet enthusiasts alike."

Biostar's coveted TPower brand makes a comeback with TPower X79, Biostar's premium overclocking motherboard for the Core i7 "Sandy Bridge-E" platform. TPower motherboards have been known to be a part of some record-setting CPU OC feats right from the days of LGA775. The TPower X79 is another product that's meant for record-setting feats, with its strong VRM and slim feature-set that does away with everything overclockers don't need and adds to the bloat of the motherboard.

The CPU is powered by an 8-phase DuraMax VRM with active phase control and direct FETs. It draws power from two 8-pin EPS connectors, apart from the 24-pin ATX and an optional 4-pin Molex for PCIe slot stability. Apart from a strong VRM, the board makes use of POSCAP capacitors in the CPU area, and a high-quality clock generator. The VRM and chipset heatsinks are connected with a 6 mm heat pipe, the heatsinks are made of a ceramic surface material for better dissipation. The CPU is wired to just four DDR3 DIMM slots, one per channel, which shouldn't be an issue for overclockers. It gives you shorter memory traces. Apart from JEDEC speeds of up to DDR3-1600 MHz, the board supports DDR3-2400 MHz by overclocking.

Foxconn's latest premium gamer-overclocker segment motherboard, the Quantum Force X79, has finally taken shape. Foxconn's Quantum Force motherboards are designed to offer good overclocking features at a great value. The Quantum Force X79 uses a 14-phase VRM to power the LGA2011 "Sandy Bridge-E" processor, plus a 2-phase VRM for the memory. There are four DDR3 DIMM slots, one per memory channel. Expansion slots include three PCI-Express 3.0 x16 (PCI-E1_x16, PCI-E3_x16, and PCI-E4_x16. The second black slot (PCI-E2_x16) is electrical PCI-Express 2.0 x8.

The board is packed with features that help overclockers, starting with triple redundant BIOS, voltage measurement points for manual voltage measurements (with a wide range of voltage domains), manual overclocking buttons on board, power, reset, clear-CMOS buttons, POST speaker, and plenty of fan headers.

ASRock's socket LGA2011 motherboard lineup doesn't end with X79 Extreme7 as thought before, the company thinks there's scope for an even more loaded model that's literally bursting with connectivity and expansion features. Enter the X79 Extreme9. This board uses high-grade digital PWM circuitry to power the CPU. It draws power for the CPU VRM from two 8-pin EPS connectors. Unlike the X79 Extreme7, this board features eight DDR3 DIMM slots, two per memory channel. Expansion slots include five PCI-Express 3.0 x16, and a PCIe x1.

Since it completely ran out of room on the main PCB, ASRock put two important connectivity features on a separate (included) addon card, called the ASRock "Game Blaster". This card occupies the PCIe x1 slot, it packs a next-generation Creative SoundCore3D audio processor (more advanced than X-Fi), and a low-overhead/low-latency gigabit Ethernet connection. It's not exactly known if this connection is driven by a Killer 2100 or a more common PCIe GbE PHY backed by ASRock's proprietary packet prioritization software (XLAN).

ASRock showed off pictures of the first socket LGA2011 motherboard in the compact micro-ATX form-factor, the ASRock X79 Extreme4-M Within its small board footprint of 240 x 240 mm, the X79 Extreme4-M offers almost every feature the platform has to offer. To begin with, the LGA2011 socket is powered by an 8-phase VRM that makes use of high-grade solid-state chokes, and driver-MOSFETs. It is wired to four DDR3 DIMM slots, two on either sides of the socket. All four expansion slot bays available to the mATX form-factor are made use of, with three PCI-Express 3.0 x16 and one legacy PCI.

The electrical configuration of the three PCI-Express slots appears to be x16, x8, x16 (permanent). The chipset is cooled by an active fan-heatsink. All six of its SATA ports are wired as internal ports, with two SATA 6 Gb/s and four SATA 3 Gb/s. Connectivity features include 8+2 channel HD audio with optical and coaxial SPDIF outputs, four USB 3.0 ports (two on the rear panel, two via header), one gigabit Ethernet, a number of USB 2.0 ports, Firewire, and legacy PS/2. The CMOS can be reset from the rear panel. The board will be driven by UEFI firmware.

A couple of weeks ahead of its worldwide launch, Intel's much talked about "Sandy Bridge-E" Core i7 processors and compatible motherboards are beginning to surface on an online store in China. Listings include all three of the Core i7 LGA2011 processors Intel will launch in November, that includes the quad-core Core i7-3820, six-core Core i7-3930K and six-core Core i7-3960X Extreme Edition (details on the three here. Apart from these, a few compatible motherboards such as the ASUS ROG Rampage IV Extreme and MSI X79A-GD65 8D, were also listed.

Before getting into the pricing, it's important to note that prices of components in mainland China, in general, are more or less consistent with those in the US. The top-of-the-line Core i7-3960X Extreme Edition is priced at RMB ¥7,800 (converts to US $1,227). The next best LGA2011 offering, Core i7-3930K, is priced at ¥5,800 (US $912). The most afforable of the three, Core i7-3820, goes for ¥3,500 (US $550).

Here are pictures of the release-grade revision (1.0) of Gigabyte's socket LGA2011 motherboards in its main linuep, the GA-X79-UD3 and GA-X79-UD5. These are the release-grade 1.0 revisions, that are redesigned for X79 chipset with just six SATA ports (doing away with SAS). With the LGA2011 motherboard lineup, Gigabyte is doing away with the "UD7" model, in its segment there is GA-X79-OC. We saw this coming, because UD7 was meant to be an overclocking motherboard identifier. On the company website, for example, the product page of GA-X58A-UD7 (2.0) shows GA-X58A-OC as a "newer model". The GA-X79-UD3 is poised to be the most affordable LGA2011 motherboard from Gigabyte, while the GA-X79-UD5 offers some premium connectivity and memory expansion features.

The GA-X79-UD3 uses a simple 8+1 phase VRM to power the LGA2011 CPU. The memory is powered by a 4-phase VRM. There are just four DDR3 DIMM slots, one per channel. There are four PCI-Express 3.0 x16 slots, among which two are x16 capable, and all four are x8 capable. There are two PCIe x1, and surprisingly, a legacy PCI slot (uncommon for LGA2011 platform). All six SATA ports from the X79 chipset are assigned as internal ports: two SATA 6 Gb/s (white), and four SATA 3 Gb/s (black). Three Marvell-made SATA 6 Gb/s controllers provide four additional internal ports (gray), and two eSATA 6 Gb/s. There are just four USB 3.0 ports, two on the rear panel, and two via internal header. 8+2 channel HD audio, a number of USB 2.0 ports, and one gigabit Ethernet connection make for the rest of the GA-X79-UD3.

EVGA released a teaser picture of its X79 FTW motherboard. This is EVGA's third LGA2011 motherboard, after the E-ATX Super Record 3 and XL-ATX X79 Classified. This board confines itself to the dimensions of a standard ATX form-factor motherboard (240 x 300 mm). It targets the gamer-overclocker market. The LGA2011 socket is powered by a 14-phase VRM, while the memory, 4-phase. EVGA completely did away with cylindrical conductive polymer capacitors, and used a 100% POSCAP capacitor design. Power is drawn in from a 24-pin ATX (angled) connector, 8-pin EPS, and a 4-pin Molex (for PCIe slot electrical stability). There are just four DDR3 DIMM slots, one per memory channel.

Expansion slots include four PCI-Express 3.0 x16 (two are x16 capable, all four are x8 capable), a PCI-Express 2.0 x16 (electrical x8), and one PCIe x1. NVIDIA 4-way SLI and AMD CrossFireX are supported. The only internal SATA ports on this board are the ones the X79 PCH gives out, two SATA 6 Gb/s and four SATA 3 Gb/s. There are two eSATA ports, driven by a third-party controller. There are as many as eight USB 3.0 ports on the rear-panel, and two via internal header. 8+2 channel HD audio, two GbE connections, a Bluetooth connection, and PCH-wired USB 2.0 ports (for keyboard/mouse) make for the rest of the standard connectors. There is an EVBot header on the rear-panel, that lets you connect to the EVBot monitoring/control module. The UEFI BIOS is stored in two separate EEPROMs, and a 2-way switch lets you manually switch between the two. Expect the X79 FTW to be a part of the company's first wave of LGA2011 motherboards.

ASUS' top-tier LGA2011 lineup is completed by the TUF Sabertooth X79. This board, along with the ROG Rampage IV Extreme and P9X79 Deluxe makes up for it. There will be many more affordable LGA2011 boards by ASUS, one such model we're hearing about is the P9X79 Pro. The TUF Sabertooth family is based on the idea of rock-solid stability and component durability, these motherboards are built to last, if not score accolades with overclocking like the ROG boards are designed for.

The Sabertooth X79 uses an ASUS-designed Digi+ VRM to power the CPU, which is spread across two sides of the socket (north and west). The heatsink cooling the VRM components to the west is actively cooled by a 40 mm fan, the one over the X79 PCH is cooled by a similarly sized lateral blower, too. Like with the other two top-tier boards from ASUS' stable, this one provides eight DDR3 DIMM slots supporting quad-channel memory.

Here are the first pictures of ASUS P9X79 Deluxe, the company's premium segment LGA2011 motherboard based on the X79 chipset. This features in ASUS' main motherboard lineup, and not sub-lineups such as Republic of Gamers (ROG) or The Ultimate Force (TUF). The P9X79 Deluxe is loaded with features and connectivity options. To begin with, the LGA2011 socket is powered by a next-generation Digi+ VRM design by ASUS, driven by Dual Intelligent Processors III (next-generation Energy Processing Unit (EPU) chip and TurboV Processing Unit (TPU)). Like with the ROG Rampage IV Extreme, VRM is spread across three sides of the socket, and each cluster of MOSFETs is cooled by heatsinks. The socket is wired to eight DDR3 DIMM slots in two sets of four slots, supporting quad-channel DDR3. The memory VRM uses a Digi+ design, too.

Among the six expansion slots, there are four PCI-Express x16 slots, and two PCIe x1. The PCH gives out six SATA ports, two 6 Gb/s (white), four 3 Gb/s (blue), the two additional 6 Gb/s ports come from a third-party controller. There are two power-eSATA ports on the rear panel. The eight USB 3.0 ports on this board are spread across as six ports on the rear-panel, and two via standard header. Other connectivity includes 8+2 channel HD audio, two gigabit Ethernet connections, USB 2.0, and Bluetooth.

Here is ASUS' top of the line LGA2011 motherboard targeting the gamer-overclocker market, the Republic of Gamers (ROG) Rampage IV Extreme. This board offers all the expansion room and connectivity you'll ever need, plus a wealth of nifty features that help overclockers and ease incremental upgrades. To begin with, the Rampage IV Extreme employs a strong digital PWM circuitry that supports heavy voltage-assisted overclocking with Vdroop control.

The LGA2011 socket is wired to eight DDR3 DIMM slots (two per channel). CPU and memory VRM areas are located along three sides of the socket, all cooled by heatsinks that are connected by heat pipes. These VRM heatsinks share heat with the one over the X79 PCH, which is actively cooled by a fan.

MSI is readying a new LGA2011 HEDT (high-end desktop) motherboard based on the Intel X79 chipset, which features eight DDR3 DIMM slots, two per memory channel, letting you take advantage of the fast quad-channel DDR3 IMC of Sandy Bridge-E Core i7 processors, as well as not letting you fall short of memory expansion. The X79A-GD65 8D, as it's called, makes room for eight DIMM slots, four on either sides of the socket. The CPU is powered by a 5+2 phase VRM, and the memory by a 4-phase VRM.

Expansion slots include four PCI-Express x16, from which four are wired to the CPU socket, two are PCI-Express 3.0 x16 capable, four are PCI-E 3.0 x8 capable (depending on the way the slots are populated with add-on cards), one is PCI-E 2.0 x4 capable and is wired to the chipset. Then there's the lone PCI-E x1. NVIDIA 4-way SLI and AMD 4-way CrossFireX are supported.

Gigabyte teased us with pictures of its high-end socket LGA2011 motherboard featured in its G1.Killer series of motherboards designed for the gamer-overclocker market. The G1.Assassin 2, as it's called, is based on the Intel X79 chipset. We don't have landscape pictures of the board, yet, but whatever little bits of pictures we do have, reveal quite a bit. To begin with, this board will retain the black+green "weapon" styling of predecessors in the series. The LGA2011 socket is wired to four DDR3 DIMM slots, in sets of two, on either sides of the socket. Each DIMM slot has its own memory channel.

From the CPU VRM heatsink, a heat pipe is finding its way to a stylized X79 PCH heatsink. This heatsink is designed to look like a handgun. Since it's so small, it isn't looking as realistic as the clip design featured on other G1.Killer motherboards. There are just six internal SATA ports we can find from the picture, two 6 Gb/s, and four 3 Gb/s. In terms of expansion slots, we could spot three PCI-Express 3.0 x16 slots, these could be arranged in the x16/x16/NC or x16/x8/x8 lane configuration.

EVGA was missing on the LGA2011 motherboard wall at this year's Computex event in June. EVGA is one of the top brands overclockers and enthusiasts look forward to, for motherboards. As a late consolation, EVGA gave out a teaser picture of one of its upcoming X79 motherboards a little later in June. At GeForce LAN 6, however, EVGA made full use of the spotlight to unveil its X79 Classified (E799), a top-tier socket LGA2011 motherboard clearly designed for overclockers.

The X79 Classified uses a traditional LGA2011 motherboard layout, but with wide open spaces to make insulating it (against condensation) easier. The CPU power delivery seems to be in the hands of some very high-grade VRM design, it draws power from two 8-pin EPS connectors apart from the 24-pin ATX (that's right-angled). There are just four DDR3 DIMM slots, one per memory channel. A 4-phase memory VRM is deployed. Over the chipset area, a large contiguous heatsink covers most hot components in the central-right region. We don't expect there to be a bridge chip.

ASRock is readying is new, high-end socket LGA2011 motherboard targeting the upper-most tier of the PC enthusiast market, the X79 Extreme7. This board will be a part of the company's first wave of LGA2011 motherboards, which are slated for mid-November, 2011. Pictures scored by XFastest reveal the board to be filled to the brim with features. The CPU socket is powered by a 16-phase VRM making use of high-grade chokes, and server-grade poscap capacitors.

The socket is wired to six DDR3 DIMM slots arranged in sets of three on either sides of the socket, powered by a 4-phase VRM. Among channels A, B, C, and D; channels B and D have two DIMM slots wired, so if you have four DDR3 modules, you should populate slots 0, 2, 3, and 5; to take advantage of quad-channel DDR3 memory. There are heatsinks over the memory VRM areas, that are connected to the heatsink over the CPU VRM using heat pipes.

In 2012, it's curtain's for Intel's iconic Nehalem/Tylersburg platform, with the company issuing the Intel X58 chipset a schedule for discontinuation. The chipset has exactly 12 more months to attain EOL (end of life) status. Intel will continue to take orders for Intel X58 till April 27, 2012, the last of these orders will have shipped by October 12, 2012. Intel X58 + ICH10/R is the de facto chipset for Intel's Core i7 client processors in the LGA1366 package.

To motherboard vendors, the X58 I/O Hub (northbridge) is priced at US $39, and another $14 for the ICH10R southbridge. In November 2011, Intel is releasing the proper successor for the Nehalem/Tylersburg platform, the Sandy Bridge-E/Patsburg, consisting of Core i7 processors in the LGA2011 package, and Intel X79 chipset.

Last week, ECS showed off its top-of-the-line HEDT (high-end desktop) segment motherboard in the making, the X79R-AX Black Series. This socket LGA2011 motherboard based on the Intel X79 chipset is expected to be launched along with the Core i7 "Sandy Bridge-E" processors. It targets the gamer-overclocker market, providing support for up to four graphics cards in 4-way SLI and CrossFire. The LGA2011 socket is powered by a 14-phase VRM, is is wired to four DDR3 DIMM slots on its either sides, supporting up to 32 GB of quad-channel DDR3 memory.

Expansion slots include four PCI-Express 3.0 x16, that can be electrically configured as x16/NC/x16/NC (single card or 2-way), x16/NC/x8/x8 (3-way), and x8/x8/x8/x8 (4-way). Other slots include two PCI-Express x1. Storage connectivity includes 12 internal SATA ports, and two eSATA. The data-rates of the internal ports are not known, but it most likely has two SATA 6 Gb/s and four SATA 3 Gb/s ports wired to the X79 PCH, while the remaining six ports are driven by additional SATA 6 Gb/s 2-port controllers. The eSATA ports run at 6 Gb/s.

Gigabyte surprised many last year, when it broke its decade-long tradition of blue-colored PCBs to unveil its first black ones. Pictures of the first black PCB Gigabyte boards were first dismissed as Photoshop jobs, but after some confirmation, news posts carried quite some shock-value. It's such small things that Gigabyte has known to be quite particular about. Not that it's bad, Gigabyte is the second biggest motherboard vendor because many of its rigid design policies paid off, but some of these could work against the company.

One such has been the company's reluctance to use UEFI firmware on its motherboards. With socket LGA1155 and AM3+, we saw motherboard vendors of all shapes and sizes, including much smaller ones such as BIOSTAR adopt UEFI. Besides allowing vendors to deploy mouse-driven graphical user interface for the CMOS Setup program, UEFI addresses many glaring limitations of legacy BIOS, which hasn't changed much over decades. UEFI allows you to boot from volumes bigger than 2.2 TB in size. Eventually, storage volumes several terabytes in size will become mainstream, and that's when the ticking time-bomb that is BIOS, will blow.

At IDF, motherboard vendors got to show off their near-complete socket LGA2011 motherboards based on the X79 chipset. Many of these were half-built and straight out of R&D at this year's Computex event, back in June. Gigabyte showed off its first X79 motherboards, the GA-X79-UD5, GA-X79-UD7, and G1.Assassin 2. Unlike previous generations of high-end Gigabyte motherboards, the UD7 isn't a beefed-up UD5 with added features and better cooling. The two are entirely different right from the PCB, to the features they offer.

The UD5 targets premium users, with eight DDR3 DIMM slots, geared for 3-card SLI/CrossFire, while the UD7 is bleeding-edge with just four DDR3 DIMM slots, but a wealth of overclocking features and support for 4-card SLI/Crossfire. Then there's the G1.Assassin 2, which targets the gamer-overclocker market with neat features such as hardware-accelerated Creative X-Fi audio and Bigfoot Killer NIC, with support for 3-card SLI/Crossfire.

Here are the first pictures of Intel Desktop Board Extreme Series DX79SI. This is the first socket LGA2011 we've seen that has eight DDR3 DIMM slots (four on either side of the socket, two DIMMs per channel), every other board has barely enough room for four. LGA2011 supports quad-channel DDR3 memory, yielding 33% bandwidth gain over triple-channel DDR3 and 100% gain over dual-channel DDR3. Despite its large memory area, the DX79SI sticks to standard ATX board dimensions. This is thanks to some smart engineering.

While on other LGA2011 boards, the CPU VRM is concentrated to the north of the socket, on this board, it is split between the north and south of the socket. Both areas have heatsinks, and the VRM area to the south is located where older generations of motherboards would typically have the northbridge chip. X79 is a single-chip chipset, located where the PCH/southbridge typically is.