At Computex this year, Biwin also showcases a range of PCIe M.2 2280 SSDs, spanning from PCIe Gen 5 and Gen 4 to PCIe Gen 3. The reason behind this diverse lineup seems to be Biwin's intention to cater to users who may not have newer systems but still wish to benefit from PCIe M.2 storage advantages at lower costs. For PCIe Gen 5, Biwin has the X570 M.2 SSDs (512 GB, 1 TB, 2 TB, 4 TB) that are capable of reaching speeds of up to 14500 MB/s sequential read, 14000 MB/s sequential write.

For users with PCIe Gen 4 platforms, Biwin shows the NV7400 M.2 (and NV7400 Heatsink) SSDs that reach speeds up to 7450 MB/s read, and 7200 MB/s write, and NV7200 (7200 MB/s read, 6200 MB/s write). Both come with 512 MB, 1 TB, 2 TB, and 4 TB capacities. Now for even older platforms, Biwin has the NV3500 PCIe 3.0 SSD, capable of 3500 MB/s read, and 3000 MB/s write speeds (max), and is available with 512 GB, 1 TB, and 2 TB capacities.

Micron Technology, Inc., today announced two new Crucial Pro Series products with the addition of overclocking-capable memory and the world's fastest Gen 5 SSD. The Crucial DDR5 Pro Memory: Overclocking Edition modules are available in 16 GB densities up to DDR5-6000 to deliver higher performance, lower latencies and better bandwidth to fuel gaming wins and reduce performance bottlenecks. These powerful DDR5 overclocking DRAM modules are compatible with the latest DDR5 Intel and AMD CPUs and support both Intel XMP 3.0 and AMD EXPO specifications on every module, eliminating compatibility hassles. Built with leading-edge Micron 232-layer TLC NAND, the Crucial T705 SSD unleashes the full potential of Gen 5 performance.

Lightning-fast sequential reads and writes up to 14,500 MB/s and 12,700 MB/s (up to 1,550K/1,800K IOPS random reads and writes) respectively, enable faster gaming, video editing, 3D rendering and heavy workload AI application processing. With DDR5 Pro Overclocking DRAM and the T705 SSD, enthusiasts, gamers and professionals can harness the speed, bandwidth and performance they need for AI-ready PC builds capable of processing, rendering and storing large volumes of AI generated content.

Nextorage Japan is preparing its NE5N range of PCIe Gen 5 NVMe SSDs for launch in early June - listings have emerged on Newegg for 2 TB and 1 TB models - with a product page appearing recently on the company's (Japanese language) website. These units boast read and write speeds rated for operation up to 10 GB/s, and are based on Phison's E26 PCIe Gen 5 controller. Nextorage started off as a provider of PlayStation 5-oriented PCIe Gen 4 SSD products, due to company ties to Sony Corporation, but its upcoming NE5N range indicates that it intends to target buyers within the enthusiast PC market.

The initial batch of cutting edge SSDs are unlikely to end up in any PS5 consoles, thanks to a sizable dual formation heatsink - the Japanese company has filed a patent for the bulky two-level structure and heatpipe combination design. Gen 5 SSDs are said to be difficult to tame in terms of heat output, and manufacturers are going to great lengths (and sizes) to provide adequate cooling solutions in advance. Future versions of Nextorage Japan's NE5N NVMe M.2 2280 PCIe Gen 5 SSDs are being refined for compact PCs and laptops, so it will be interesting to find out about the intended thermal tempering for more cramped environments.

Thermalright has quietly updated its product page this week, and has rolled out another SSD cooler that looks quite familiar. The HR-10 2280 PRO M.2 SSD heatsink is now featured on their website, where it sits close to a similar looking model - the now standard HR-10 2280. This non-PRO version was revealed late last month as a step up from the older HR-09 SSD heatsink. The brand new HR-10 2280 PRO sports a key upgrade over its passively cooled older siblings - a 30 mm 12 V cooling PWM fan has been integrated into the middle of the fin stack's body. Thermalright's latest M.2 heatsink also fully prepared for and compatible with the next generation of SSDs - its revised design will accommodate Gen 5 solid-state drive standards.

The HR-10 Pro is consists of four 5 mm-thick nickel-plated copper heatpipes that make contact with a user appointed M.2-2280 SSD, over a mirror-finish nickel-plated copper base-plate. The heatpipes loop through a dense aluminium fin-stack with slats designed to maximize surface area for highly effective heat dissipation. A die-cast metal top-plate with company branding completes the package. The HR-10 PRO weighs in at 95 g (so 10 g more than the standard HR-10). The heatsink measures 23.7 mm x 90.3 mm x 43.8 mm (WxDxH). Thermalright has not revealed any pricing or stock availability at the time of writing.