Write Intensive Usage

When copying games from your Steam Library or other very large files (>10 GB), you might have noticed that write speeds on your SSD start out at full speed and then drop considerably. The underlying reason is that modern drives have caches that soak up write bursts to improve performance. In the fairly uncommon scenario of writing data that's too big to fit into these caches, the drive will have to write data directly to flash, and it will probably juggle some out of its write cache at the same time as well, which can result in a significant loss of write speed. Newer TLC drives operate part of their capacity in SLC mode for increased performance. This test can reveal the size of that SLC cache.

Testing on this page looks at exactly that scenario. We write a sequential stream of 1 MB blocks to the drive in a single thread, like a typical file-copy operation would do, and measure write speeds twice a second. The drive is fully erased before testing to ensure any caches are emptied. Please note that this test writes a lot of data in a very short time, which is something most consumers will never do.


While the chart looks a bit scary at first with all the ups and downs, it's actually showing a really good result. The write speeds start out at a staggering 2.7 GB/s and remain there until well over 100 GB have been written in a very short period. At this point the pseudo-SLC cache seems to be exhausted, so the drive has to write to TLC flash directly, which is slower, "only" 1 GB/s, but still very fast when compared to other TLC drives that often drop to HDD speeds at this point in our test. The drive will now flush the SLC cache to TLC in background, once that is finished write speeds jump up again, above 2.5 GB/s.