ASUS Radeon RX 9070 TUF OC Review 73

ASUS Radeon RX 9070 TUF OC Review

by
W1zzard
,
on ,
Manufacturer: ASUS
Cooler Performance Comparison »

Temperatures

Temperature & Noise Comparison
IdleGaming
GPUNoiseGPUHotspotMemoryNoiseRPMPower
ASRock RX 9070 Steel Legend34°CFan Stop60°C79°C86°C22.5 dBA1080 RPM253 W
ASUS RX 9070 TUF OC35°CFan Stop47°C65°C78°C25.8 dBA1222 RPM242 W
ASUS RX 9070 TUF OC (Quiet BIOS)35°CFan Stop54°C72°C82°C22.3 dBA806 RPM243 W
PowerColor RX 9070 Hellhound OC33°CFan Stop56°C77°C86°C23.5 dBA904 RPM233 W
PowerColor RX 9070 Hellhound OC (Quiet BIOS)32°CFan Stop61°C81°C90°C23.0 dBA653 RPM222 W
XFX RX 9070 QuickSilver OC35°CFan Stop57°C72°C82°C24.9 dBA1015 RPM248 W
Testing notes & interpretation
  • GPU temperatures listed here are based on GPU-Z measurements of the on-chip temperature sensor.
  • We report these GPU temperatures under a constant load for ease of comparison, as well as an idle state most end users will experience often. This combination helps dictate cooling needs and provides context for how well the thermal solution performs.
  • Please note that GPU temperature is contingent on a variety of factors. Some, including clock speed, voltage settings, cooler design, and production variances, are beyond the control of the end user. Others, such as ambient temperature, case design, and airflow pathway affecting the GPU, can be mitigated to certain extents.
  • The data in the table above shows results for similar cards, achieved in identical conditions during previous TechPowerUp reviews.

Thermal Analysis

For this test, we first let the card sit idle to reach thermal equilibrium. Next, we start a constant 100% gaming load, recording several important parameters while the test is running. This shows you the thermal behavior of the card and how the fans ramp up as temperatures increase. Once temperatures are stable (no increase for two minutes), we stop the load and record how the card cools down over time.

GPU Clock, Voltage Temperature, Fan Speed over Time


We also ran the same test for the secondary BIOS:


Fan Noise

Noise Testing Details
  • The tested graphics card is installed in an open bench system. The system does not emit any noise on its own, all components are passively cooled.
  • All cards are loaded with the same test: a custom-engineered game-like load in Unreal Engine 4 that always renders the same frame at 60 FPS to minimize variance.
  • To ensure 100% loading of the GPU, the render complexity is set dynamically so that each card operates at peak performance without being CPU limited.
  • We're not using Furmark because it creates too high a load that forces fans to run faster than what is encountered during typical gameplay.
  • Noise results of other cards on this page are measurements of the respective reference design.
  • We let the card heat up and wait for the fan speed to no longer change. Depending on the fan-control algorithm, this can often take quite some time.
  • Noise level measurements are conducted using a 1/2" calibrated measurement microphone that records onto the host PC using a digital audio processing pipeline. The microphone is recalibrated at least once a month.
  • Measurement distance is 50 cm. Our previous noise-level measurements took place at a distance of 1 m. We reduced the distance to be able to better distinguish acoustics of the very quiet graphics cards.

View as single page
Next Page »Cooler Performance Comparison
View as single page
Mar 12th, 2025 09:14 EDT change timezone

Latest GPU Drivers

New Forum Posts

Popular Reviews

Controversial News Posts