CRYORIG M9i Review 2

CRYORIG M9i Review

Noise Levels & Fan Speeds »

Test System & Temperature Results

Test System

Test System
Processor:Intel Core i7-4770K @ 3.7 GHz & 4.2 GHz OC
(Haswell)
Motherboard:MSI Z87-GD65 Gaming
Intel Z87
Memory:2x 4096 MB AMD Performance Edition AP38G1869U2K
@ 1600 MHz 9-9-9-24
Video Card:AMD Radeon HD 5450 1 GB
Passive
Hard disk:OCZ Vertex Plus R2 60 GB SATA II SSD
Power Supply:Zalman ZM1250 Platinum
Provided by: Zalman
Case:LIAN LI PC-T60B
Operating System:Windows 7 64-bit Service Pack 1
TIM:Arctic Ceramique 2

Testing Procedure

All testing is done at a room temperature of 23°C (73°F) and with a 1°C margin of error. The coolers are tested with Turbo, EIST, and C1E enabled, which will allow the CPU to clock down to a low 1.6 GHz while idle, or clock up to proper speeds under stock and overclocked conditions. The retail Intel Core i7-4770K I use for testing at stock is set to load-optimized defaults with the CPU's voltage at a static 1.15 V. Overclocked, the processor is running at 4.2 GHz on the CPU and 3.9 GHz on cache, with respective voltages set to 1.20 V and 1.15 V. During all these tests, fans are set to run at 100% in the BIOS, with temperatures being recorded by AIDA64.

The idle test will consist of the CPU sitting idle at the desktop for 15 minutes. This will allow for a stable temperature reading that will be recorded at the end of those 15 minutes.

Wprime's and AIDA64's CPU test represent typical multi-threaded loads. Both offer consistent results, with one being a benchmarking application and the other a stability test. Both are run for 15 minutes before the peak reading during the test is recorded and taken as the result. This test lets enthusiasts know what temperatures they can expect to see with games and applications. Wprime is set to eight threads while AIDA64 is configured to stress the CPU, FPU, cache, and system memory.

AIDA64 offers maximum heat generation when set to stress just the FPU in the stability test, which will really push the CPU. This test represents extreme loads much like LinX, Prime95, and other extreme stress tests many users are familiar with.

Idle Temperatures


At idle, CRYORIG's M9i does well, placing toward the top of the chart. However, with the CPU overclocked, it tumbles down a cliff, though even so, performance is still more than acceptable.

Typical Load Temperatures


The M9i is similar in size to the Scythe Katana 4 and Raijintek Aidos, and it, as one might expect, trades blows with both in these stock and overclocked tests.


Firing up Aida64's CPU benchmark, CRYORIG's M9i again trades blows with the Scythe Katana 4 and Raijintek Aidos. While it doesn't offer insane performance, it does perform rather well in the overclocked test where it even beats the Cooler Master Hyper 212 EVO by 1°C

Max Load Temperatures


The Aida64 FPU test was unable to break the mighty M9i from CRYORIG. At stock, it performs between the Raijintek Aidos and Katana 4. With the CPU overclocked, it manages to gain a leg up on its competitors, pulling ahead by 1-2°C.
Next Page »Noise Levels & Fan Speeds
View as single page
Jul 24th, 2024 07:24 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts