Packaging and Contents

The Deepcool Gamer Storm Captain 360 features a rather large radiator, which has the box measure in at roughly 47 cm in length, 13.65 cm in width, and 19.7 cm in height. The front of the box showcases a large image of the cooler and its unique pump. The left side shows a few of the cooler's features, such as its 120,000 MTBF, FDB fan bearings, powerful motors, and, of course, the fact that it is overclocking friendly. On the back of the box are the cooler's specifications, or at least some of them. The radiator's and pump's dimensions and a list of supported AMD and Intel sockets is all you will find there.


The right side is the same as the left, though it comes with a black rather than gray backdrop. The bottom is much the same as the right and left sides. It's not until you get to the top of the box that you find a short list of the cooler's features and some more specifications.

Contents

Opening the box, I found the Gamer Storm Captain 360 safe and sound, secured inside a cardboard tray like every other all-in-one liquid cooler that has come before it. Suffice it to say that Deepcool's packaging is, once again, more than adequate as it does provide the necessary protection the product needs.


Deepcool made sure to support all modern AMD and Intel sockets with the Gamer Storm Captain 360. The Universal backplate and simple, easy-to-use mounting hardware should make installation a breeze. Like other AIO CPU coolers, the radiator Deepcool has used can support three extra fans for a total of six fans in all. However, additional fan screws have not been included. Other than that, everything you will need to mount the Captain 360 has been provided; that is, except for a chassis with enough room.

Common parts supplied for mounting include:

• 12x Radiator screws
• 12x Fan screws
• 4x Screw bolts
• 4x Screw posts for LGA2011
• 4x Black plastic buckles
• 4x Mounting bracket screws
• 4x Thumbscrews
  [*[4x Rubber washers
• 3x 120 mm GF120 fan
• 2x AMD mounting brackets
• 2x Intel mounting brackets
• 1x PWM fan hub
• 1x Backplate
• 1x CLC unit
• 1x User's manual
• 1x Metal logo sticker