Power Consumption

Cooling modern video cards is becoming more and more difficult, especially when users are asking for quiet cooling solutions. That's why the engineers are now paying much more attention to power consumption of new video card designs.

For this test we measure power consumption of only the graphics card, via PCI-Express power connector(s) and PCI-Express bus slot. A Keithley Integra 2700 with 6.5 digits is used for all measurements. Again, the values here reflect card only power consumption measured at DC VGA card inputs, not the whole system.

We chose 3DMark03 Nature as a standard test representing typical 3D usage because it offers: - very high power draw - high repeatability - is a standard benchmark that is supported by all cards - drivers are actively tested and optimized for it - supports all multi-GPU configurations - easy to obtain - fairly compact in size - test runs a constant duration and renders a variable scene with variable complexity just like any normal game.

The four result values are as following:

• Idle: Windows Vista Aero sitting at the desktop (1280x1024 32-bit) all windows closed, drivers installed. Card left to warm up in idle until power draw is stable.
• Average: 3DMark03 Nature at 1280x1024, 6xAA, 16xAF. This results in the highest power consumption. Average of all readings (12 per second) while the test was rendering (no title screen).
• Peak: 3DMark03 Nature at 1280x1024, 6xAA, 16xAF. Highest single reading during the test.
• Maximum: Furmark Stability Test at 1280x1024, 0xAA. This results in a very high non-game power consumption that can typically be reached only with stress testing applications. Card left running stress test until power draw converged to a stable value.

I can not definitely explain why the MSI N275GTX draws considerably less power than the GTX 275 reference, despite it having twice the memory and higher clock speeds. Both GPUs run at 1.15 V under load (measured with multimeter on the back of the GPU). It is my educated guess that MSI's changes to the voltage regulation and other component changes on the PCB have this beneficial effect.