PC Power & Cooling Silencer MK III 750 W Review 11

PC Power & Cooling Silencer MK III 750 W Review

Packaging, Contents & Exterior »

Specifications

PC Power & Cooling MK3S750 Features & Specs
Max. DC Output750W
PFCActive PFC
Efficiency80 PLUS Gold
Operating temperature0°C - 50°C
ProtectionsOver Voltage Protection
Under Voltage Protection
Over Power Protection
Short Circuit Protection
Cooling140 mm Double Ball-Bearing Fan (RL4Z B1402512H)
Dimensions150 mm (W) x 86 mm (H) x 180 mm (D)
Weight2.1 kg
ComplianceATX12V v2.31, EPS 2.92
Warranty7 years
Price at time of review (exc. VAT)$149.99 (US), 115.90€ (EU)

Efficiency is Gold and its maximum operating temperature meets the ATX specification of 50°C. Its protection features only include the basic ones, and OTP (Over Temperature Protection) is not amongst them. OCP (Over Current Protection) hasn't been included either, since it is meaningless in a high capacity and single +12V rail unit.

The cooling fan utilizes ball bearings for increased longevity, which is a wise choice for a product with such a long warranty.

The unit's length exceeds the standard ATX specification of 16 cm by 2 cm, but you probably won't have any compatibility issues if you have a normal chassis. Finally, the unit's warranty is extra long at seven years, matching Corsair's warranty of their high-end PSU products. The price looks kind of stiff, but it is the MSRP, and the retail price will most likely be lower.

PC Power & Cooling Silencer MK III 750 WPower Specs
Rail3.3V5V12V5VSB-12V
Max. Power24A24A62A3A0.5A
120W744W15W6W
Total Max. Power750W

Only a single +12V rail equips the unit, and it can deliver up to 62 A, so it is quite strong. The minor rails have 120 W maximum combined output, which will easily cover all the needs of a modern system, and the 3 A maximum that the 5VSB can output will suffice in most cases.

Cables & Connectors, Power Distribution

Native Cables
ATX connector (625mm)20+4 pin
4+4 pin EPS12V/ATX12V (640mm)2
Modular Cables
6+2 pin PCIe (580mm)4
SATA (400mm+150mm+150mm+150mm)12
4 pin Molex (400mm+150mm+150mm+150mm)4
FDD adapter (+100mm)1

Thankfully, its native cables are limited to three, but that number could be two if the second EPS connector were to sit on a modular cable, something that is highly preferable because almost no one utilizes both EPS connectors.

The amount of provided cables and connectors is adequate for the capacity of the unit, but we have, lately, seen some high-end 750 W units with six PCIe connectors, and PC P&C could follow the same route since the +12V rail of the MK3S750 is quite strong.

The length of all cables is ideal and will allow the PSU to be installed easily, even into full tower cases, and the distance amongst all connectors is pretty large. Some gauges of the ATX connector (the +12V and the earth ones) are of 16AWG size, while the rest are of 18AWG size. All the other connectors also use the standard 18AWG.

Since this PSU features a single +12V rail, we do not have anything to comment on about its power distribution.
Next Page »Packaging, Contents & Exterior
View as single page
Dec 22nd, 2024 06:37 EST change timezone

New Forum Posts

Popular Reviews

Controversial News Posts