Capacity: | 128 GB |
---|---|
Variants: | 128 GB 256 GB 512 GB |
Overprovisioning: | 8.8 GB / 7.4 % |
Production: | End-of-life |
Released: | May 23rd, 2013 |
Part Number: | VTX450-25SAT3-128G |
Market: | Consumer |
Form Factor: | 2.5" |
---|---|
Interface: | SATA 6 Gbps |
Protocol: | AHCI |
Power Draw: |
0.55 W (Idle) Unknown (Avg) 2.2 W (Max) |
Manufacturer: | Indilinx |
---|---|
Name: | Barefoot 3 M10 IDX500M10-BC |
Architecture: | ARM Cortex-A9 |
Core Count: | Dual-Core |
Frequency: | 352 MHz |
Foundry: | TSMC |
Process: | 65 nm |
Flash Channels: | 8 @ 400 MT/s |
Chip Enables: | 8 |
Controller Features: | DRAM (enabled) |
Manufacturer: | Micron |
---|---|
Name: | L84A FortisFlash |
Type: | MLC |
Technology: | Planar |
Speed: | 50 MT/s .. 200 MT/s |
Capacity: | 16 chips @ 64 Gbit |
ONFI: | 2.3 |
Process: | 20 nm |
Dies per Chip: | 1 die @ 64 Gbit |
Planes per Die: | 2 |
Read Time (tR): | 100 µs |
Program Time (tProg): | 1300 µs |
Block Erase Time (tBERS): | 3.0 ms |
Endurance: (up to) |
3000 P/E Cycles |
Page Size: | 8 KB |
Block Size: | 256 Pages |
Plane Size: | 2048 Blocks |
Type: | DDR3L-1600 CL11 |
---|---|
Name: | Micron MT41K256M8DA-125:M (D9PFJ) |
Capacity: |
256 MB
(1x 256 MB) |
Organization: | 2Gx8 |
Sequential Read: | 525 MB/s |
---|---|
Sequential Write: | 290 MB/s |
Random Read: | 75,000 IOPS |
Random Write: | 70,000 IOPS |
Endurance: | 22 TBW |
Warranty: | 3 Years |
MTBF: | 2.0 Million Hours |
Drive Writes Per Day (DWPD): | 0.2 |
SLC Write Cache: | Yes |
TRIM: | Yes |
---|---|
SMART: | Yes |
Power Loss Protection: | No |
Encryption: |
|
RGB Lighting: | No |
PS5 Compatible: | No |
Controller:The IDX500M10 controller is slightly lower clocked (350 MHz) while it's predecessor IDX500M00-BC ran at 400 MHz |